Product Name Fe-Ni-Co Alloy Nanopowder
Cas No 7439-89-6 / 7440-02-0/ 7440-48-4
Appearance Powder
Purity 99.9%
APS 60-70 nm (Can be Customized)
Formula Fe-Ni-Co
Product no. SCM-NM-130/22
Description :-
Fernico describe a family of metal alloys made primarily of iron, nickel and cobalt. The family includes Kovar, FerNiCo I, FerNiCo II, and Dumet. The name is made up of the chemical symbols of its constituent three elements. Dumet is a portmanteau of dual and metal, because it is a heterogeneous alloy, usually fabricated in the form of a wire with an alloy core and a copper cladding. These alloys possess the properties of electrical conductivity, minimal oxidation and formation of porous surfaces at working temperatures of glass and thermal coefficients of expansion which match glass closely. These requirements allow the alloys to be used in glass seals, such that the seal does not crack, fracture or leak with changes in temperature.
Related Product :
Ni-Ti 60 nm, Ni:Ti/50:50
Sn-Cu 40-100 nm, SN:CU/9:1
Sn-Cu 40-100 nm, SN:CU/1:9
Sn-Cu 40-100 nm, SN:CU/92:8
Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17
Fe-Ni 40-100 nm, Fe:Ni/5:5
Fe-Ni 40-100 nm, Fe:Ni/2:8
Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11
Cu-Zn 40nm Cu:Zn/5:5
Cu-Zn 40-100 nm, Cu:Zn/5:5
Cu-Zn 40-100 nm, Cu:Zn/6:4
Ag-Cu Nanopowder, 99.9%,
Product Name Cu-In-S Alloy Nanopowder
Cas No 7440-50-8 / 7440-74-6/ 7704-34-9
Appearance Powder
Purity 99%
APS 60-70 nm (Can be Customized)
Formula Cu-In-S
Product no. SCM-NM-137/22
Description :-
Cu-In-S Alloy are generally irreversible and also require high overpotentials to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green.
One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection
Related Product :
Ni-Ti 60 nm, Ni:Ti/50:50
Sn-Cu 40-100 nm, SN:CU/9:1
Sn-Cu 40-100 nm, SN:CU/1:9
Sn-Cu 40-100 nm, SN:CU/92:8
Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17
Fe-Ni 40-100 nm, Fe:Ni/5:5
Fe-Ni 40-100 nm, Fe:Ni/2:8
Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11
Cu-Zn 40nm Cu:Zn/5:5
Cu-Zn 40-100 nm, Cu:Zn/5:5
Cu-Zn 40-100 nm, Cu:Zn/6:4
Ag-Cu Nanopowder, 99.9%,
Product Name Cu-In Alloy Nanopowder
Cas No 7440-50-8 / 7440-74-6
Appearance Powder
Purity 99%
APS 60-70 nm (Can be Customized)
Formula Cu-In
Product no. SCM-NM-135/22
Description :-
Copper nanoparticles with great catalytic activities can be applied to biosensors and electrochemical sensors. Redox reactions utilized in those sensors are generally irreversible and also require high overpotentials (more energy) to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green.
One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described in Figure 3, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection
Related Product :
Ni-Ti 60 nm, Ni:Ti/50:50
Sn-Cu 40-100 nm, SN:CU/9:1
Sn-Cu 40-100 nm, SN:CU/1:9
Sn-Cu 40-100 nm, SN:CU/92:8
Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17
Fe-Ni 40-100 nm, Fe:Ni/5:5
Fe-Ni 40-100 nm, Fe:Ni/2:8
Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11
Cu-Zn 40nm Cu:Zn/5:5
Cu-Zn 40-100 nm, Cu:Zn/5:5
Cu-Zn 40-100 nm, Cu:Zn/6:4
Ag-Cu Nanopowder, 99.9%,
Product Name : Cu Zn Alloy Nano powder
Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram
Product Name Cu Zn Alloy Nanopowder
Cas No 7440-50-8 / 7440-66-6
Appearance Powder
Purity 99%
APS 60-70 nm (Can be Customized)
Formula Cu Zn
Product no. SCM-NM-132/22
Description :-
copper couple is an alloy of zinc and copper that is employed as a reagent in organic synthesis. The couple has been widely applied as a reagent in other reactions requiring activated zinc metal. copper couple does not refer to a rigorously defined chemical structure or alloy composition. The couple may contain varying proportions of copper and zinc; the zinc content is typically greater than 90%, although an alloy containing similar proportions of zinc and copper is used in some cases. The couple is frequently prepared as a darkly-colored powder and is slurried in an ethereal solvent prior to being used in slight excess relative to the substrate. Activation of zinc by copper is essential to the couple s utility, but the origin of this effect is poorly documented. It is speculated that copper enhances reactivity of zinc at the surface of the alloy.
Related Product :
Ni-Ti 60 nm, Ni:Ti/50:50
Sn-Cu 40-100 nm, SN:CU/9:1
Sn-Cu 40-100 nm, SN:CU/1:9
Sn-Cu 40-100 nm, SN:CU/92:8
Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17
Fe-Ni 40-100 nm, Fe:Ni/5:5
Fe-Ni 40-100 nm, Fe:Ni/2:8
Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11
Cu-Zn 40nm Cu:Zn/5:5
Cu-Zn 40-100 nm, Cu:Zn/5:5
Cu-Zn 40-100 nm, Cu:Zn/6:4
Ag-Cu Nanopowder, 99.9%,
Product Name Cobalt Nanopowder
Cas No 7440-48-4
Appearance Powder
Purity 99.9%
APS 60-70 nm (Can be Customized)
Formula Co
Product no. SCM-NM-106/22
Molar Weight 58.9
Description :-
Electromagnetic-wave absorption; Electromagnetic-wave radiation shielding for cellar phones; Ferrofluids; High density magnetic storage; Magnetic inks; Magnetic toner in xerograph; Contrast agents in magnetic resonance imaging. Metal nanopowder should be gently placed and avoided violent vibration and friction. Metal nanopowder should be prevented from moisture, heat, impact and sunlight.
Related Products:
Co Cobalt (Co) Powder, 99.95% (1, 7, 8, 10, 15um)
Co Cobalt, 99.9%, 1-3um
Cobalt (Co) Nanopowder / Nanoparticle (Co, 99.8%, 28 nm, partially passivated, metal basis)
Cobalt (Co) Nanopowder / Nanoparticle (Co, 99.8%, 28 nm, carbon coated, metal basis)
Fe-Ni-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, Fe:Ni:Co/55:28:17
Fe-Cr-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100nm, Fe:Cr:Co/64:25:11
Ni-Cr-Co Nanopowder / Nanoparticle, 99.9%,
Product Name : Cr2GaN MAX Phase Powder
Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram
Product Name Cr2GaN MAX Phase Powder
Cas No N/A
Appreance Gray to Black
Purity 98%
APS 40-5m
Formula Cr2GaN
Product no. SCM-MX-107/22
Related Product:
Cr2GaC MAX Phase Powder
Fe doped Ti3AlC2 MXene
Hf21nc MAX Phase Powder
Related Information :-
Storage Conditions:
Airtight Sealed, Avoid light and keep dry at room temperature.
Please contact us for customization & Price inquiry
Nano Wings Pvt Ltd offers 100% water dispersible nano silver in powder form.The material is based on our innovative proprietary technology "nano Ag cookies'.
Once dispersed the material has 100% compatibility with isopropanol. In the dispersion form the nano silver exhibits below properties.
Average Particle Size (in water dispersion) APS: 42 nm (PSD histogram)
Silver Content 6.25 w%. Therefore 1 kg of material offers 65000 ppm of nano silver concentration.
Crystal Structure: FCC
Crystallite size: 10-30 nm
Phase purity: >99.5%
pH: value 7
Surface treatment: YES
Zeta potential (in water dispersion): -33.5 mV
UV absorption peak maxima: 435 nm
Applications: Our material in combination with hydrogen peroxide can be used in aquatech, water treatment as an effective antimicrobial agent. It can also be employed in water based paints
We can offer you Granulated Blast Furnace Slag for cement industry.
25000 mt to 200,000 Mt/ monthly
WE have requirement for Granulated Blast Furnace Slag with the following spec
