Product Name : Cu-In Alloy Nano powder
Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram
Product Name Cu-In Alloy Nanopowder
Cas No 7440-50-8 / 7440-74-6
Appearance Powder
Purity 99%
APS 60-70 nm (Can be Customized)
Formula Cu-In
Product no. SCM-NM-135/22
Description :-
Copper nanoparticles with great catalytic activities can be applied to biosensors and electrochemical sensors. Redox reactions utilized in those sensors are generally irreversible and also require high overpotentials (more energy) to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green.
One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described in Figure 3, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection
Related Product :
Ni-Ti 60 nm, Ni:Ti/50:50
Sn-Cu 40-100 nm, SN:CU/9:1
Sn-Cu 40-100 nm, SN:CU/1:9
Sn-Cu 40-100 nm, SN:CU/92:8
Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17
Fe-Ni 40-100 nm, Fe:Ni/5:5
Fe-Ni 40-100 nm, Fe:Ni/2:8
Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11
Cu-Zn 40nm Cu:Zn/5:5
Cu-Zn 40-100 nm, Cu:Zn/5:5
Cu-Zn 40-100 nm, Cu:Zn/6:4
Ag-Cu Nanopowder, 99.9%,
Product Name : Cu Zn Alloy Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cu Zn Alloy Nanopowder Cas No 7440-50-8 / 7440-66-6 Appearance Powder Purity 99% APS 60-70 nm (Can be Customized) Formula Cu Zn Product no. SCM-NM-132/22 Description :- copper couple is an alloy of zinc and copper that is employed as a reagent in organic synthesis. The couple has been widely applied as a reagent in other reactions requiring activated zinc metal. copper couple does not refer to a rigorously defined chemical structure or alloy composition. The couple may contain varying proportions of copper and zinc; the zinc content is typically greater than 90%, although an alloy containing similar proportions of zinc and copper is used in some cases. The couple is frequently prepared as a darkly-colored powder and is slurried in an ethereal solvent prior to being used in slight excess relative to the substrate. Activation of zinc by copper is essential to the couple s utility, but the origin of this effect is poorly documented. It is speculated that copper enhances reactivity of zinc at the surface of the alloy. Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
Product Name : Cu-In-S Alloy Nanopowder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cu-In-S Alloy Nanopowder Cas No 7440-50-8 / 7440-74-6/ 7704-34-9 Appearance Powder Purity 99% APS 60-70 nm (Can be Customized) Formula Cu-In-S Product no. SCM-NM-137/22 Description :- Cu-In-S Alloy are generally irreversible and also require high overpotentials to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green. One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.
We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol
The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase. The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance. The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion. Product name ALLOY 20 STAINLESS STEEL Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Size and composition of a variety of high-quality single-uniform hybrid nano-copper-nickel composite powder can be controlled Application: 1. Metal nano-lubrication additives: add 0.1 to 0.3 percent from oil, grease, in the process of Moldova Moldova Sassafras Sassafras Vice self-lubricating surface, he studied Film, a significant reduction in the Mount Sassafras, deputy anti-wear friction-reducing properties. And a single metal nano-lubrication additives, to reduce the amount of powder by adding three to five times, to repair a short time, Mount Sassafras coefficient of small and long-term stability. 2. Block of metal nanocomposite materials used: inert gas protection of the powder sintering Preparation large copper-nickel metal nanocomposites. A plastic bag lined anti-static packaging, 100 ~ 1000g sub-bag.
Product Name : Fe-Ni-Co Alloy Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Fe-Ni-Co Alloy Nanopowder Cas No 7439-89-6 / 7440-02-0/ 7440-48-4 Appearance Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula Fe-Ni-Co Product no. SCM-NM-130/22 Description :- Fernico describe a family of metal alloys made primarily of iron, nickel and cobalt. The family includes Kovar, FerNiCo I, FerNiCo II, and Dumet. The name is made up of the chemical symbols of its constituent three elements. Dumet is a portmanteau of dual and metal, because it is a heterogeneous alloy, usually fabricated in the form of a wire with an alloy core and a copper cladding. These alloys possess the properties of electrical conductivity, minimal oxidation and formation of porous surfaces at working temperatures of glass and thermal coefficients of expansion which match glass closely. These requirements allow the alloys to be used in glass seals, such that the seal does not crack, fracture or leak with changes in temperature. Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
Supplier: Mercury , urea, labsa ,sles and chemical products
Product Description Aluminium Alloy Grain Refiners(Aluminium based master alloys) Manufacturer in the world by far. STA was listed on the main board of the produce a full range of products for the global Aluminium industry including Aluminium Alloy Grain Refiners, master alloys,alloy additives ,chemical fluxes .Consistent and excellent product quality is assured by independently certified quality and environmental management systems, modern laboratories and R&D facilities. With five wholly-owned subsidiaries ,so far the only company in the world that has established a complete industrial chain from the mining and processing of fluorite raw ore, the manufacturing of fluorine-container materials (K2TiF6,KBF4), and the production of Aluminium Alloy Grain Refiners,master alloys. Our strengths Consistent and excellent product quality is assured by independently certified quality and environmental management systems, modern laboratories and R&D facilities. FLUXES Product Item Aluminium Refining Fluxes Aluminium Refining Flux Aluminium Refining Modifying Drossing Flux Aluminium Refining Flux without Fluorine and Natrium Aluminium Refining Flux without Fluorine with Natrium Grain Refining Flux Aluminium Refining Flux without Natrium Aluminium Drossing Fluxes Aluminium Drossing Degassing Flux Aluminium Drossing Flux Aluminium Drossing Flux without Natrium Melt Furnace Cleaning Flux Aluminium Covering Fluxes Aluminium Covering Flux Aluminium Covering Flux without Calcium Aluminium Covering Flux without Natrium Aluminium Modifying Fluxes Ferrum Modifying Flux Sodiumm Modifying Flux Phosphorous Modifying Flux Aluminium Grain Refining Fluxes Titanium Boron Refining Flux Removal Fluxes Natrium Removal Flux Calcium Removal Flux Magnesium Removal Flux Other Non-ferrous Metal Fluxes Zinc Refining Flux ,Zinc Refining Drossing Flux Copper Refining Flux , Copper Covering Flux ,Copper Refining Drossing Flux Magnesium Covering Flux ,Mg Grain Refining Flux Mg Refining and Drossing Flux
