Birch
This iron made protection box for gas geyser. it is mainly used to save geyser from fire.
Silicon Bronze Sheet
CASTING POWDER
Bismuth Ingot Application: 1. Needle bismuth could be used in paint material, additive, activator, medicine, toiletry, jewelry, semiconductor, electronic sprinkler, alloys and bismuth compounds. 2. Bismuth needles Mainly used for bismuth crystal, antomatic sprinkler, perforating bullet, welding electrode, producing bismuth compounds, used in alloys and metallurgy, etc. Appearance silvery white metal, rectangle ingot Size375 140 30mm, 15kilos ± 1kilo Molecular FormulaBi Molecular Weight208.98037 Melting Point271.3�°C Boiling Point1560±5C CAS No.7440-69-9 EINECS No.231-177-4 Packaging & Shipping Packing: 15KGS/Ingot with good package Shipping Time: Within 7 days time Product Name Pure Bismuth Appearance silvery white metal, rectangle ingot Size 375 140 30mm, 15kilos ± 1kilo Molecular Formula Bi Molecular Weight 208.98037 Melting Point 271.3C Boiling Point 1560±5C CAS No. 7440-69-9 EINECS No. 231-177-4
Cadmium Ingots 99.99%, 99.995% Product name: cadmium ingot Appearance: powder, lump, granule, ingot Molecular formula: Cd Molecular weight: 112.41 Melting point: 320.9C Boiling point: 765C (lit) Resistivity: 7.27-cm, 22C Energy gap: 1.44eV Density: 8.65g/mL at 25C (lit.) CAS number: 1306-25-8
Cobalt Sheet Metal Cobalt is a shiny, brittle metal that is used to produce strong, corrosion and heat-resistant alloys, permanent magnets and hard metals. Properties: Atomic Symbol: Co Atomic Number:27 Atomic Mass: 58.93g/mol Element Category: Transition metal Density: 8.56g/cm3at 20C Melting Point:2723F (1495C) Boiling Point:5301F (2927C) Moh's Hardness: 5 Size: Width:60mm,100mm,150mm,200mm or customized Length: 80mm,100mm to 600mm or customized Category: Cobalt
Indium Ingot 99.995% purity Specifications: 1.Typical purity 99.995% up, customize high purity 99.9999% 2. Wide range of usage such as alloys, special solder, coating, electronics and high purity indium, etc. 3. Customized indium powder size 80mesh, 100mesh, 200mesh, 325mesh, 500mesh. 4. High purity virgin Indium metal 99.995% up. 5.Wide range of application like the transparent electrode(ITO film) , solder in electronic industry, Low melting alloy, bearing for high performance engine , and the seal in low temperature, etc.
Magnesium Ingot Product name: metallic magnesium alloy ingot Specifications: 5kg, 6kg, 8kg, 12kg, 17.5kg Appearance: bright silver metallic surface or as per buyer request Main application: magnesium alloy additive, military industry, chemical industry and more.
Shredded Scrap ISRI 210 & 211 Shredded Grade: ISRI 210 & 211 Origin: EU Density: 60, 65, 70 Shipment: within 30 days Quantity: 1000-1,0000 MT Delivery: containers or bulk
PNS Scrap Grade: ISRI 236-238 Origin: EU Quality: prime or used Shipment: within 30 days Quantity: 300-3,000 Delivery: containers or bulk
We are exporters of Polypropylene Car Bumper Scrap and we can supply 500MT on monthly basis. However, we are seeking for buyers worldwide. Contact us for terms and condition, if interested.
Ready available CRCA Scrap - 50,000 tons Interested parties please contact
DESCRIPTION : It is galvanized steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A: The wire has four points and is formed by twisting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanized barbed wire is manufactured from galvanized mild steel wire conforming to IS: 280 Galvanizing : The barbed wire is galvanized and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanized coating on the round wire. Packing: The coils are normally supplied in the bare condition.
DESCRIPTION : The wires are custom built to suit customers actual requirement. These wire are normally supplied as Annealed finish wires APPLICATION : Used in manufacturing of lock circlip used for locking shafts Specification : IS:EN 42C/42J
DESCRIPTION : It is galvanised steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A : The wire have four points and formed by twesting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanised barbed wire is manufactured from galvaised mild steel wire confirming to IS : 280 Galvanizing : The barbed wire is galvanised and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanised coating on round wire. Packing: The coils are normally supplied in bare condition.
DESCRIPTION : These wires are supplied in coils with Phosphated coating to facilitate cold heading operation. APPLICATION : Used in manufacturing Balls, Rollers, Taper rollers, Cylindrical rollers and needles etc. made out from EN31 / SAE 52100. SPECIFICATIONS : Grade EN31 / SAE 52100 (Carbon 0.98 â?? 1.10 % and Chromium 1.30 â?? 1.60%). Microstructure: Uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodized annealed. All properties like Hardness, Tensile strength, Size tolerance, coil weight etc. are maintained as per customerâ??s specification. PACKING : The finished drawn wires are dipped in rust preventive oil, securely bound at four places and wrapped with Polethene & Hessian/ HDPE. We specialize in supplying Bearing wires to customerâ??s actual needs. Specification : IS:EN 31/SAE 52100 SIZE RANGE : Min. 1.60 MM, Max. 9.50 MM
DESCRIPTION : These wires are High Carbon Annealed Bright drawn wires. APPLICATION : Used in manufacturing hand sewing needle and Hosiery needle. SIZE RANGE : Min. 0.76 MM, Max. 2.00 MM
Product Name : Fe-Ni-Co Alloy Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Fe-Ni-Co Alloy Nanopowder Cas No 7439-89-6 / 7440-02-0/ 7440-48-4 Appearance Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula Fe-Ni-Co Product no. SCM-NM-130/22 Description :- Fernico describe a family of metal alloys made primarily of iron, nickel and cobalt. The family includes Kovar, FerNiCo I, FerNiCo II, and Dumet. The name is made up of the chemical symbols of its constituent three elements. Dumet is a portmanteau of dual and metal, because it is a heterogeneous alloy, usually fabricated in the form of a wire with an alloy core and a copper cladding. These alloys possess the properties of electrical conductivity, minimal oxidation and formation of porous surfaces at working temperatures of glass and thermal coefficients of expansion which match glass closely. These requirements allow the alloys to be used in glass seals, such that the seal does not crack, fracture or leak with changes in temperature. Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
Product Name : Cu-In-S Alloy Nanopowder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cu-In-S Alloy Nanopowder Cas No 7440-50-8 / 7440-74-6/ 7704-34-9 Appearance Powder Purity 99% APS 60-70 nm (Can be Customized) Formula Cu-In-S Product no. SCM-NM-137/22 Description :- Cu-In-S Alloy are generally irreversible and also require high overpotentials to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green. One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
