PNS Scrap Grade: ISRI 236-238 Origin: EU Quality: prime or used Shipment: within 30 days Quantity: 300-3,000 Delivery: containers or bulk
We are exporters of Polypropylene Car Bumper Scrap and we can supply 500MT on monthly basis. However, we are seeking for buyers worldwide. Contact us for terms and condition, if interested.
Ready available CRCA Scrap - 50,000 tons Interested parties please contact
DESCRIPTION : It is galvanized steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A: The wire has four points and is formed by twisting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanized barbed wire is manufactured from galvanized mild steel wire conforming to IS: 280 Galvanizing : The barbed wire is galvanized and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanized coating on the round wire. Packing: The coils are normally supplied in the bare condition.
DESCRIPTION : The wires are custom built to suit customers actual requirement. These wire are normally supplied as Annealed finish wires APPLICATION : Used in manufacturing of lock circlip used for locking shafts Specification : IS:EN 42C/42J
DESCRIPTION : It is galvanised steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A : The wire have four points and formed by twesting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanised barbed wire is manufactured from galvaised mild steel wire confirming to IS : 280 Galvanizing : The barbed wire is galvanised and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanised coating on round wire. Packing: The coils are normally supplied in bare condition.
DESCRIPTION : These wires are supplied in coils with Phosphated coating to facilitate cold heading operation. APPLICATION : Used in manufacturing Balls, Rollers, Taper rollers, Cylindrical rollers and needles etc. made out from EN31 / SAE 52100. SPECIFICATIONS : Grade EN31 / SAE 52100 (Carbon 0.98 â?? 1.10 % and Chromium 1.30 â?? 1.60%). Microstructure: Uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodized annealed. All properties like Hardness, Tensile strength, Size tolerance, coil weight etc. are maintained as per customerâ??s specification. PACKING : The finished drawn wires are dipped in rust preventive oil, securely bound at four places and wrapped with Polethene & Hessian/ HDPE. We specialize in supplying Bearing wires to customerâ??s actual needs. Specification : IS:EN 31/SAE 52100 SIZE RANGE : Min. 1.60 MM, Max. 9.50 MM
DESCRIPTION : These wires are High Carbon Annealed Bright drawn wires. APPLICATION : Used in manufacturing hand sewing needle and Hosiery needle. SIZE RANGE : Min. 0.76 MM, Max. 2.00 MM
Product Name : Fe-Ni-Co Alloy Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Fe-Ni-Co Alloy Nanopowder Cas No 7439-89-6 / 7440-02-0/ 7440-48-4 Appearance Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula Fe-Ni-Co Product no. SCM-NM-130/22 Description :- Fernico describe a family of metal alloys made primarily of iron, nickel and cobalt. The family includes Kovar, FerNiCo I, FerNiCo II, and Dumet. The name is made up of the chemical symbols of its constituent three elements. Dumet is a portmanteau of dual and metal, because it is a heterogeneous alloy, usually fabricated in the form of a wire with an alloy core and a copper cladding. These alloys possess the properties of electrical conductivity, minimal oxidation and formation of porous surfaces at working temperatures of glass and thermal coefficients of expansion which match glass closely. These requirements allow the alloys to be used in glass seals, such that the seal does not crack, fracture or leak with changes in temperature. Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
Product Name : Cu-In-S Alloy Nanopowder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cu-In-S Alloy Nanopowder Cas No 7440-50-8 / 7440-74-6/ 7704-34-9 Appearance Powder Purity 99% APS 60-70 nm (Can be Customized) Formula Cu-In-S Product no. SCM-NM-137/22 Description :- Cu-In-S Alloy are generally irreversible and also require high overpotentials to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green. One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
Product Name : Cu-In Alloy Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cu-In Alloy Nanopowder Cas No 7440-50-8 / 7440-74-6 Appearance Powder Purity 99% APS 60-70 nm (Can be Customized) Formula Cu-In Product no. SCM-NM-135/22 Description :- Copper nanoparticles with great catalytic activities can be applied to biosensors and electrochemical sensors. Redox reactions utilized in those sensors are generally irreversible and also require high overpotentials (more energy) to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green. One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described in Figure 3, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
Product Name : Cu Zn Alloy Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cu Zn Alloy Nanopowder Cas No 7440-50-8 / 7440-66-6 Appearance Powder Purity 99% APS 60-70 nm (Can be Customized) Formula Cu Zn Product no. SCM-NM-132/22 Description :- copper couple is an alloy of zinc and copper that is employed as a reagent in organic synthesis. The couple has been widely applied as a reagent in other reactions requiring activated zinc metal. copper couple does not refer to a rigorously defined chemical structure or alloy composition. The couple may contain varying proportions of copper and zinc; the zinc content is typically greater than 90%, although an alloy containing similar proportions of zinc and copper is used in some cases. The couple is frequently prepared as a darkly-colored powder and is slurried in an ethereal solvent prior to being used in slight excess relative to the substrate. Activation of zinc by copper is essential to the couple s utility, but the origin of this effect is poorly documented. It is speculated that copper enhances reactivity of zinc at the surface of the alloy. Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,
Product Name : Cobalt Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cobalt Nanopowder Cas No 7440-48-4 Appearance Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula Co Product no. SCM-NM-106/22 Molar Weight 58.9 Description :- Electromagnetic-wave absorption; Electromagnetic-wave radiation shielding for cellar phones; Ferrofluids; High density magnetic storage; Magnetic inks; Magnetic toner in xerograph; Contrast agents in magnetic resonance imaging. Metal nanopowder should be gently placed and avoided violent vibration and friction. Metal nanopowder should be prevented from moisture, heat, impact and sunlight. Related Products: Co Cobalt (Co) Powder, 99.95% (1, 7, 8, 10, 15um) Co Cobalt, 99.9%, 1-3um Cobalt (Co) Nanopowder / Nanoparticle (Co, 99.8%, 28 nm, partially passivated, metal basis) Cobalt (Co) Nanopowder / Nanoparticle (Co, 99.8%, 28 nm, carbon coated, metal basis) Fe-Ni-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, Fe:Ni:Co/55:28:17 Fe-Cr-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100nm, Fe:Cr:Co/64:25:11 Ni-Cr-Co Nanopowder / Nanoparticle, 99.9%,
Product Name : Cr2GaN MAX Phase Powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cr2GaN MAX Phase Powder Cas No N/A Appreance Gray to Black Purity 98% APS 40-5m Formula Cr2GaN Product no. SCM-MX-107/22 Related Product: Cr2GaC MAX Phase Powder Fe doped Ti3AlC2 MXene Hf21nc MAX Phase Powder Related Information :- Storage Conditions: Airtight Sealed, Avoid light and keep dry at room temperature. Please contact us for customization & Price inquiry
We are proactive organization Specialist in Stainless Steel Pipes and other quality products that meet and exceed customer`s specific requirements and thus ensure complete satisfaction. We are capable of providing a vast range of materials like stainless steel, Carbon Steel & Alloy Steel Pipe Fittings from stock, to suit your needs. Products Stainless Steel Products Nickel Alloys Nickel Aluminum Bronze (NAB) Copper Nickel (Cu/Ni) Hydraulic Pipes Stainless Steel Balls Stainless Steel Stem Duplex Steel Sheet / Rods Super Duplex Steel Sheet / Rods Valve Component
Exotic Metal Alloys is one of the Nickel Alloy 200 Round Bars are made by utilizing the prominent nature of nickel amalgam that is sourced from extraordinary 'ol structured show shippers. In any case, the improvement being picked up is imagining a key ground in plan out the stunning thought of the thing. The thing is passed on Nickel Alloy 200 Round Bars are made by using mind blowing nature of nickel amalgam that is sourced from ensured show vendors. In any case, the improvement being made is driving forward through a mammoth headway in plan out the dazzling thought of the thing. The thing is passed on by using groupings of present day mechanical social gatherings and contraption paying little character to foul material quality measures to make possibly what an application has the choice to have. In like manner, standard stage devastating graph is done that considers quality control and probability being made parts. Keeping structures and spending plan, the industry is driving the thing in various examinations, subtleties and at reasonable rates.
Hastelloy C276 is a superalloy that wires molybdenum and nickel and has some element of tungsten that gives amazing detaching control and quality in the wide component of extraordinary temperature and condition. On the off chance that you are finding the correct maker who offers Hastelloy C276 bars, by then we would suggest you purchase these bars They are one of the unmistakable makers who give the best and stunning nature of bars in various structures and shapes as appeared by the interest and need of clients. They utilize unimaginable quality grungy material and current advancement to give positive length, size, and plan to these bars. Their destroying get-together of bosses conducts different tests to make these bars of high bore.
Exotic Metal Alloys Monel K-500 Bars, These bars are the amazing idea of restricting use and scratched spot. It denies any wear in tear around its surface. Round bars are treated with various cementing process so that these are indestructible in any condition. Its unmatched insane quality makes it perfect for liberal managing application. Bars counter any weight and setting parts. With no affirming and beating these bars stays against fluctuating loads. Monel bars are completely made game plans for working in high-temperature condition for discrediting any bowing. We gives confinement in bars some of them are H8, H9, H10, H11, H12, H13K9, K10, K11, and K12. Estimations are length 1 to 6 meters, broadness ranges from 0.1 to 100 mm. hex, square, round, square shape, billet are a few conditions of these bars.
Packagig : Bulk
Metal elephant tealight Metal cow Metal bowl with spoon Metal bowl spoon tray set Metal tealight with glass top Metal Wall decor Metal Agarbatti Stand Tortoise Aluminium Tray and Bowl Box with 2 Spoons Metal Birds Tea Light of Candle Lamp Copper Bottles with 2 Copper glasses . Metal Ganesh lakshmi Sarasvati Metal Dry Fruit Swan tray Metal Flowers Ti Light Metal Wall decor Radha Krishna Metal Wall Clock Ganesha Clock Metal Ti Light Peacock Iron Metal Tissue Holder Metal Ganesh Laksmi Metal Bandhanvar (Latkan) Metal Pen Stand Iron Tea Light Metal Tortoise Rajasthani frames - Wall Hanging Metal Spoon ( Set of 6) Metal Laughing Buddha Metal Ganesh Dipak Metal Durga Maa Box Birds Ti Light of Candle Lamp Ti Light Peacock Iron Metal Wall decor Radha Krishna Metal Wall Clock Ganesha Clock Kumkum Box Aluminium with Brass Metal Elephant Ti Light Metal Tribal Wall Hanging Metal Ganesha on Sitar Metal Showpiece Metal Ti Light (Tabla shaped) Metal Tribal Statue Aluminium Kumkum Box Metal Iron Urli Set Metal Tray Metal Plate Metal Wall Decor - Krishna With Leaf Metal Ganesh Dipak Metal Matki Ti light Metal Tortoise Plate Copper Matka Metal Jug Ti Light Metal helicopter Table Clock Metal Ti Light With Birds Metal Kanha Cow With Calf Metal Dipak And Glass Metal Peacock Ti Light Aluminium Swan Kumkum Set Iron Elephant With Clock and Ti Light Stand Metal Candle Diffused Ti Light Metal Durga Metal Birds Ti Light Metal buddha Ti Light Metal Flower Baggi Ti Light Metal RingFlower Ti Light Metal Buddha With Tree Metal Dancing Doll Metal Lady Ti Light Metal Mobile Stand Metal Musical Frame Wall hanging Metal With glass LED Lamp Metal Birds Home decor Items Metal Tree Home decor Items Metal Lady Clock Metal Mother Child Ti Light Metal Mother Child Elephant Ti Light Metal Camel Clock Metal Musical instruments Men Metal Snake Charmer Frame Metal Horse Wall Decor Metal Fruits Platter Set Metal and Glass - Lamp With LED Metal Dancing Lady Home Decor Metal Iron - Box (Paper) Metal Hand Wash Spray Bottle Metal Storage Basket Silver & Gold Plated Handi with Spoon
