Specifications 1. Design Standard : IS/ISO 13095 | API609 | BS5155 2.Testing Standard : API 598 | IS/ISO 13095 3. Face to Face : As per IS/ISO 13095 | API609 | BS5155 4. Pressure Rating : PN 10 | PN 16 5. End connection : Wafer to suite ANSI 150 Class, BS Table D & E | DIN PN 10 & 16 Materials 6. Body : CI, SGI/DI, WCB, CF8, CF8M, Super Duplex, etc 7. Disc : SGI/DI, WCB, CF8, CF8M, Duplex, Nylon Coated, Rubber Coated etc. 8. Seat : EPDM, Nitrile, Viton, Hypalon, Silicon, PTFE etc. 9. Operation : MS, SG,SS Handle | Pneumatically Actuated | Electrically Actuted (Motorised) | Limit & Tamper Switch Fitted
1. Design Standard : IS/ISO 13095 | API609 | BS5155 2.Testing Standard : API 598 | IS/ISO 13095 3. Face to Face : As per IS/ISO 13095 | API609 | BS5155 4. Pressure Rating : PN 10 | PN 16 5. End connection : Wafer to suite ANSI 150 Class, BS Table D & E | DIN PN 10 & 16 Materials 6. Body : Alluminium Die Cast /Equivalent ASTM B 85-84-383.0 7. Disc : S.S. 316 (ASTM A 351 Gr. CF8M) 8. Seat : EPDM etc. 9. Operation : MS, SG,SS Handle | Pneumatically Actuated | Electrically Actuted (Motorised) | Limit & Tamper Switch Fitted
Specifications 1. Design Standard : IS/ISO 13095 | API609 | BS5155 2.Testing Standard : API 598 | IS/ISO 13095 3. Face to Face : As per IS/ISO 13095 | API609 | BS5155 4. Pressure Rating : PN 10 | PN 16 5. End connection : Wafer to suite ANSI 150 Class, BS Table D & E | DIN PN 10 & 16 Materials 6. Body : CI, SGI/DI, WCB, CF8, CF8M, Super Duplex, etc 7. Disc : SGI/DI, WCB, CF8, CF8M, Duplex, Nylon Coated, Rubber Coated etc. 8. Seat : EPDM, Nitrile, Viton, Hypalon, Silicon, PTFE etc. 9. Operation : MS, SG,SS Handle | Pneumatically Actuated | Electrically Actuted (Motorised) | Limit & Tamper Switch Fitted
We are authorized supplier of all type of valves(industrial) in India.
Spline plug gauge is required to inspect the internal spline component.
JSK Enterprises offers ball valves in a wide range of sizes, pressure ratings, and materials, with welded or flanged connections A quarter-turn spindle is attached to a ball within a ball valve. The ball features a hole, or port, through the middle, which allows flow to occur when the port is aligned with both ends of the valve. When the valve is closed, the hole is perpendicular to the valveâ??s ends, preventing flow. The location of the handle allows you to see the position of the valve. The upstream pressure presses the ball into the seat on a floating ball type, resulting in a tight shut off. The ball is fixed on a trunnion-mounted type; seat sealing action is produced by the thrust of springs operating on the seat rings, which presses the seat rings against the ball as the pressure increases. Even after years of inactivity, ball valves are strong enough to produce a perfect shutdown. As a result, ball valves are an excellent choice for shutoff applications and are frequently favoured over globe and gate valves, especially in smaller sizes. Application of Ball Valve Chemical process industry Water purification Swimming pool engineering Industrial waste water Gas supply
The butterfly valve is one of the smallest and lightest valves available. The valve is widely used for a variety of applications, and the number of seat, lining, and disc alternatives has grown dramatically in recent years, making it a popular choice. A diverse choice of materials, sizes, and pressure ratings ensures reliable positive isolation and moderate flow control in a variety of applications across the industry. The metal seated valve is well-known in the petrochemical and oil industries for being lightweight, fire-resistant, and actuation-ready. When utilised correctly, butterfly valves provide a variety of benefits. Butterfly valves are quick-opening valves that consist of a metal circular disc or vane with pivot axes at right angles to the pipeâ??s flow direction, which seals against seats in the valve body when rotated on a shaft. Theyâ??re typically used to control flow as throttling valves. Butterfly valves, unlike ball valves, donâ??t have any pockets where fluids could become trapped when the valve is closed. Application of Butterfly Valves Power plants Process plants Water distribution systems Control flow Drain system By-pass system
We offer a comprehensive solution for the Meters & Gauges used in the Automobiles Industry. We offer Fuel Meters, Hour Meters, Cluster Meters, Oil Pressures Gauges, Temperature Gauges from Veethree (among world's leading manufacturers) as well as products sourced from other Indian companies that offer high precision products.
we are manufacture multi gauge as per customer requirement
Materail Tungstan carbied steel Type single ended doubled ended ,Taper plug standard key way air gauge plug gauge Range 0.5 mm to 350 mm for steel and for carbied 2.0 mm to 40 mm Standard IS 1637-1983
The novel valves Pvt. Ltd. is the manufacturer of Double Block and Bleed Ball Valve in India. It's used in chemical, water, petroleum, and other industries.
SPLINE PLUGE GAUGES Use: For Quick and Accurate inspection of internal involute/serration/ straight spline Range: Dia. 12mm to 150 mm Quality Standard: Involute Spline ANSI B92.1 1970 Material: OHNS SAE 01/02 Hardness: 58-60 Hrc. Profile: INVOLUTE/SERRATION/STRAIGHT Gauge Quality: As Per DIN-3962 Class-5
Any further inquiries please contact with me Valve Type CI / CS / SS WAFER CHECK VALVE Design Std API 598 / API 6D Size Range 25 DN to 600 DN [1 to 24] Body [SS - AISI 304 / 316] [CI- IS 210 Gr. FG 200 / ASTM A 126 Gr. B] [CS - ASTM A 216 Gr. WCB] Disc AISI 410 / 304 / 316 Seat NITRIL / EPDM / NEOPRENE / PTFE / SILICON Design Features Single Plate, Swing type, Self acting , Wafer type, Face Sealing - O ring, Horizontal / Vertical Mounting Pr.Rating [PN 10 / PN 16] [ASME - Class 150 / 300 / 600] Face to Face API 6D End Connection Sand witched Between Flanges: [BS 10 Table D / E ] [ DIN 2542 - PN 10 / DIN 2543 - PN 16] [ ASME B16.5, - CLASS 150 / 300 / 600 ] Testing Std. API 598 Optional Spring Loaded , Small / Large Groove faci
Valve Type CS / SS SWING CHECK VALVE - FL / BW Design Std BS 1868 / API 600 / ASME B16.34 Size Range 40 DN to 400 DN [1 1/2 to 16] Body [CS - ASTM A 216 Gr. WCB] [SS - ASTM A 351 Gr.CF8 / CF8M] Trim AISI 410 / 304 / 316 Seat / Disc 13% Cr. Steel / AISI 410 / 304 / 316 Design Features Swing type, Bolted Cover, Gravitational Disc, Horizontal / Vertical Mounting Pr.Rating ASME - Class 150 / 300 / 600 Face to Face ASME B 16.10 / EN 558 -1 / API 6D End Connection Flanged ASME B16.5, RF - CLASS 150 / 300 / 600 Butt Weld ASME B16.25 Testing Std. BS EN 12266 - 1 [BS 6755-1] / API 598 Optional Soft Seat / Renewable Seat / Stellite Hard facing / Dead weight Non Slam / RTJ Flanges / By Pass arrangement / Special MOC: Austenitic and Duplex Stainless Steels
Valve Type CS / SS NRV [LIFT CHECK VALVE] - FL Design Std BS 1868 / DIN 3356 / API 600 / API 6D / ASME B16.34 Size Range 25 DN to 300 DN [1 to 12] Body [CS - ASTM A 216 Gr. WCB] [SS - ASTM A 351 Gr.CF8 / CF8M] Trim AISI 410 / 304 / 316 Seat / DIsc 13% Cr. Steel / AISI 410 / 304 / 316 Design Features Piston Lift up / Spring Loaded / Bolted Cover, Horizontal Mounting Pr.Rating [ASME - Class 150 / 300] [ DIN ND 40 ] Face to Face ASME B 16.10 / EN 558 -1 / API 6D End Connection [ ASME B16.5, RF - CLASS 150 / 300 ] [ DIN 2545 - DIN ND 40 ] Testing Std. BS EN 12266 - 1 [BS 6755-1] / API 598
Valve Type SS NRV [CHECK VALVE] - SE - Universal Mounting CS / SS NRV [CHECK VALVE] - FL - Vertical Mounting Design Std ASME B 16.34 Size Range Screwed 15 DN to 50 DN [ 1/2â?? to 2â??] Flanged 15 DN to 100 DN [ 1/2 to 4] Body AISI 304 /316 / SS - ASTM A 351 Gr.CF8 / CF8M Trim AISI 304 / 316 Seat / Disc AISI 410 / 304 / 316 Design Features Screwed Spring Loaded, Guided Disc, SP / 3PDesign - Universal Mounting Flanged Spring Loaded, Guided Disc, 2P / 3P Bolted Design - Vertical / Horizontal Mounting Pr.Rating ASME Class 150 / 300 End Connection Screwed BSP / BSPT NPT - ANSI B1.20.1 Flanged ASME B16.5, RF - CLASS 150 / 300 Testing Std. BS EN 12266 -1 [BS 6755-1] / API 598 Optional Soft seat, High Pressure media
Valve Type FORGED GATE VALVE - SE / SW / BW Design Std BS EN ISO 15761 [BS 5352] / API 602 / ASME B 16.34 Size Range 15 DN to 50 DN [ 1/2 to 2] Body [ASTM A 105 ] [ASTM A 182 - F 304 / F 316 / F 11 / F 22] Trim AISI 410 / 304 / 316 Seat / Wedge 13% Cr. Steel / AISI 410 / 304 / 316 Design Features Bolted Bonnet, OS & YT, Solid Gate, HW operated Pr.Rating ASME Class 800 End Connection Screwed ASME Class 800 NPT ASME B1.20.1 Socket Weld ASME Class 800 Butt Weld ASME B16.25 Testing Std. BS EN 12266 -1 [BS 6755-1] / API 598 Optional Stellite Hard facing, Extended Bonnet
Valve Type CS / SS GATE VALVE - FL / BW Design Std BS EN ISO 10434 [BS 1414] / API 600 / API 602 / API 603/ASME B16.34 Size Range 40 DN to 400 DN [1 1/2 to 16] Body [CS - ASTM A 216 Gr. WCB] [SS - ASTM A 351 Gr.CF8 / CF8M] Trim AISI 410 / 304 / 316 Seat / Wedge 13% Cr. Steel / AISI 410 / 304 / 316 Design Features Bolted Bonnet, OS & YT, HW & Gear operated Pr.Rating ASME - Class 150 / 300 / 600 Face to Face ASME B 16.10 / EN 558 -1 / API 6D End Connection Flanged ASME B16.5, CLASS 150 / 300 / 600 Butt weld ASME B16.25 Testing Std. BS EN 12266 - 1 [BS 6755-1] / API 598 Optional IBR / Extended Bonnet for low Temp. / Lantern Ring / indicator & Locking Device/ Renewable Seat / Stellite Hard facing / Jacketed Provision / RTJ Flanges / By Pass Arrangement / Higher Sizes / Special MOC: Austenitic and Duplex Stainless Steels
Valve Type BS EN ISO 15761 [BS 5352] / API 602 / ASME B 16.34 Size Range 15 DN to 50 DN [ 1/2 to 2] Body [ASTM A 105 ] [ASTM A 182 - F 304 / F 316 / F 11 / F 22] Trim AISI 410 / 304 / 316 Seat / Disc 13% Cr. Steel / AISI 410 / 304 / 316 Design Features Bolted Bonnet, OS & YT, HW operated Pr.Rating ASME Class 800 End Connection SCREWED BSP / BSPT NPT ASME B1.20.1 SOCKET WELD ASME B16.11 BUTT WELD ASME B16.25 Testing Std. BS EN 12266 -1 [BS 6755-1] / API 598 Options Stellite Hard facing / Extended Bonnet
Valve Type CS / SS GLOBE VALVE - FL / BW Design Std BS 1873 / DIN 3356 / API 600 / API 6D / ASME B16.34 Size Range 25 DN to 400 DN [1 to 16] Body [CS - ASTM A 216 Gr. WCB] [SS - ASTM A 351 Gr.CF8 / CF8M] Trim AISI 410 / 304 / 316 Seat / Disc 13% Cr. Steel / AISI 410 / 304 / 316 Design Features Bolted Bonnet, OS & YT, HW & Gear operated Pr.Rating [ASME - Class 150 / 300 / 600] [ DIN ND 40 ] Face to Face ASME B 16.10 / EN 558 -1 / API 6D End Connection Flanged ASME B16.5, RF - CLASS 150 / 300 / 600 DIN 2545 - DIN ND 40 Butt weld ASME B16.25 Testing Std. BS EN 12266 - 1 [BS 6755-1] / API 598 Optional IBR / Soft Seat / Extended Bonnet for low Temp. / Lantern Ring / Indicator & Locking Device/ Renewable Seat / Stellite Hard facing / Parabolic Plug, Regulating Plug, Guided Plug Design / RTJ Flanges / Special MOC / Higher Sizes any further inquries please contact with me
