Novel Valves

Supplier: Butterfly valves

Supplier: Double Block And Bleed Ball Valve

Supplier: Industrial valves
Services: Transportation

DIN soft seal non-rising gate valve Product Name: DIN soft seal non-rising gate valve Model No.:(DIN)F4Z45X-16Q-100 Brief introduction: Gate valve is one of the widely used industrial valves in fluid transport projects. For traditional gate valves, there are some weaknesses, like fluid leakage, internal corrosion,etc. This resilient soft seal gate valve adopts the novel structure design, strict manufacturing technology, and new materials, which overcomes the defects of traditional gate valves and has reliable sealing performance, long service life, and is easy and convenient to operate and maintain. Characteristics of Soft seal gate valves: 1. overall rubber coated. Ductile iron gate valve has characteristics of overall rubber coated, great sealing Performance, accurate physical dimensions, which can guarantee the zero leakage, long service life, and small flow resistance. 2. light weight. The valve body and valve deck are made of ductile iron, which is light in weight, safe and reliable, easy to install. 3. corrosion resistant. The inside of the valve body is coated with non-toxic epoxy resin, which is anti-corrosive and rust resistant. That kind of gate valve not only can be used for drinking water piping line systems, also can be used for wast water delivery pipe line systems. 4. Triple seal. There are triple O-type sealing rings used for valve stem, which has small frictional resistance, and is easy to open and close.

Product overview Electric flange sealing butterfly valve is suitable for the temperature is 120 , nominal pressure 1.6 MPa for food, medicine, chemical industry, petroleum, electric power, textile, paper making, such as water supply and drainage, gas pipeline adjusting flow and intercepting medium. Performance characters 1. The design is novel, reasonable, unique in structure, light in weight and quick in opening and closing. 2. Small operation moment, easy to operate and easy to operate. 3. It can be installed in any position and convenient for maintenance. 4. Sealing parts can be replaced, seals can be reliable and can be sealed in two ways. 5. The sealing material is resistant to aging, corrosion resistance and long service life.

The butterfly-shaped buffer check valve is composed of a valve body, a valve clack, a buffer device and a micro-regulating valve. The product has the characteristics of novel structure, small volume, small fluid resistance, stable operation, reliable sealing, abrasion resistance, good buffer performance and the like, and is mainly used for industrial water supply and water pump outlet of the sewage treatment plant, and the medium in the pipe network is prevented from flowing reversely. The destructive water hammer is automatically eliminated, so that the water pump and the pipeline are not damaged The butterfly type buffer check valve can be divided according to its structure and installation mode. 1. The disc of the butterfly buffer check valve is disc shaped and rotates around the rotating shaft of the seat passage. Because the inner channel of the valve is streamlined and the flow resistance is smaller than that of the lifting butterfly check valve, it is suitable for large caliber situations with low velocity and irregular flow, but not suitable for pulsating flow, and its sealing performance is not as good as that of lifting type. Butterfly check valve is divided into three types: single valve type, double valve type and multi half type. These three forms are mainly divided according to valve caliber, in order to prevent the medium from stopping flow or backflow, and to reduce the hydraulic impact. 2, butterfly buffer check valve: disc sliding along the vertical center line of the valve body check valve, the internal thread check valve can only be installed on the horizontal pipe, in the high pressure small caliber check valve disc can use a ball. Butterfly check valve body shape is the same as globe valve (can be used with globe valve), so its fluid resistance coefficient is large. The structure is similar to the globe valve, and the valve body and disc are the same as the globe valve. The upper part of the disc and the lower part of the cover are machined with a guide sleeve, and the disc guide can be lifted and lifted freely in the guide simple of the valve. When the medium flows down, the disc is opened by the medium thrust, and when the medium stops, the disc falls on the seat from drooping, which plays the role of preventing the media countercurrent. The direction of the medium inlet and outlet channel of the straight butterfly check valve is perpendicular to the direction of the valve seat channel, and the direction of the medium inlet and outlet channel of the vertical lifting check valve is the same as that of the valve seat channel, and its flow resistance is smaller than that of the straightway type.

Structural characteristics: 1. The selected materials are exquisite, in line with relevant domestic and international standards, and have high overall quality. 2.the sealing pair of advanced and reasonable, improve the sealing performance, long service life. 3. The products are designed and manufactured according to the national standard GB/T12235, with novel structure and beautiful shape.The connecting end has flange and welding, which can be matched according to different requirements of users. 4. The packing box is designed as a water sealing structure, connected with water packing of 0.6 ~ 1.6 pa, with low friction and good sealing, which can isolate the system from the atmosphere and ensure good air tightness. It is an environmental protection product. 5.the valve stem after conditioning and surface nitriding treatment, has good corrosion resistance, abrasion resistance and abrasion resistance. 6.compact structure, flexible operation, convenient maintenance. 7. The inverted seal is made of stainless steel thread connection seal or austenitic stainless steel surfacing. The seal is reliable.Packing replacement can be carried out without stopping the machine, convenient and fast without affecting the system operation.

Model: HN-7L13 Name: Self-closing flush valve Detailed product description: Suitable for flush valve, shaking switch. Brass self-closing cartridge. self-closing time:3-5. High purity brass main body. coating luster. Service conditions: 1)The working pressure of the product is 0.05MPa-0.9MPa 2)The working temperature is more than 0° Shenzhen King Of Sun Industry Co.,Ltd. It is a professional enterprise specializing in producing and marketing of faucets, sanitary wares ect. Head office located at Shenzhen, Luohu District, nearby Hong Kong. Factory is in Heshan, closed to ShouKou town, Kaiping city. It is a faucets production base in China, famous for its excellent quality. We adopt gravity casting equipment to assure the density and uniformity thick of pipe. CNC processing equipment to assure the products Processing precision and using life. Advanced environmental protection electro-plated technology to prevent its second pollution, supply you more pure water and brightness is new even if it was used a long time. Our design combined with European advanced concept design, Fully consider for consumers, Focus on the use of consumers feeling. We have passed ISO 9001:2008, All produced "handy" products sell to Europe, South America, Sothern Asia and so on. "handy" products will continue to create novel and applied items that will lead the market to all customers in the world. OEM/ODM, Sourcing, Inspection, After-sales service, Logistic Link Tag : self closing valve, automatic flush valve

Materials of Fuel Gun A2111-15A Body: Aluminum Seals: Buna-N, Won Main stem seals: Viton Cased Oil Seal Main stem: Stainless steel Features of Fuel Gun A2111-15A series A2111-15A self-sealing refueling nozzle is designed for refilling diesel, kerosene and various gasoline. Double poppet valve easy to open the fuel gun under high pressure. Accurate flow control the user can fill up the fuel tank according to the exact number of oil they need, and it is very easy to stop the oil supply accurately. Small aluminum frame light weight, easy to operate, unique and novel in appearance. Easy to replace the oil outlet pipe MX needs to remove the screw on the oil outlet pipe and replace it with a new oil outlet pipe. The relevant accessories can be obtained Hidden normally open holding gear users can easily set three different flow rates. he overall insulating holster 4 protects the refueling gun and the vehicle, and isolates the users hands from damage. Color selection see color chart inside page. Optional splash guard. The oil outlet pipe with attitude lock can be selected. When the oil outlet pipe is tilted upward and is larger than the horizontal position, the oil gun will be automatically closed to prevent leakage and accidents. 100% factory inspection.