Output: Analogue or digital
Typical Linearity: 2.5% (absolute) 1.0% (independent linearity)
Typical Travel: 15mm electrical* / 18mm mechanical*
(*application dependent, adaptable to larger or smaller travel requirements)
Nominal Index Voltage : Programmable
Electrical Limit Maximum : 20 VDC
Supply Voltage : 4.5 - 5.5 VDC
Typical Current Draw : 12 mA (dependent on program conditions)
Maximum Response Time : 600 S
Durability :
Typical Vibration: 200 hrs.; 3 planes; 20 - 2000 Hz; 40G RMS;-40C -160C.
Typical Thermal Shock: 500 cycles, -40C and 160C; 15 sec. transition;
30 min. soak at each temperature
Typical Temperature Range: -40C > 160C
1 switching capability 10 w (max)
2 switching voltage 100 vdc (max)
3 switching current 0.5 amps (max)
4 contact resistance 1 ohms max
5 dielectric :
between terminals 200vdc for 1minute
between body & terminal 500vdc for 1minute
body & cable insulation 500vdc for 1minute
6 must operating distance 7- 14 mm with tvsc magnet tvsc-mfax-01
7 must release distance 10-25 mm with tvsc magnet tvsc-mfax-01
8 operating temperature 80 deg c max
9 surface temperature 5 deg c max @ ambient
10 ambient temperature -20 to +50 deg c
x denotes for high temperature (50 deg c )
11 IP rating ip 67.
12 sensor dimension 35x19x10 mm
13 Cable 2 core cable with shield
14 Approvals : CE & Atex.
PE-AOBDV Automatic Oil Breakdown Voltage Testeris a highly precise instrument, which can be applied to measure either the breakdown voltage or also check the withstanding voltage for a predefined time. Usual available automatic test sets only perform the former function, but PE-AOBDV can do both. PE-AOBDV can measure the breakdown voltage repetitively and computes an average reading, for a proper decision making. PE-AOBDV consists of an integrated Oil Cup, HV AC power source.
Features
- 0-80kV or 0-100kV smooth operation, 5mA trip current
- Complete Automatic operation
- Non-contact magnetic stirring
- Programmable Stir, Hold, and Intermediate Stand times
- Programmable voltage ramp rate
- Repetitive test sequence and average readings
- Digital display output
- Integrated thermal Printer
- Internal memory for data storage and recall
- Included IS 6792, IEC 60156 and GB507-86 test sequences
- Programmable test sequences as per requirement.
1 pc - 25 kgs.
5245 Electronic Semi Conductor Devices Other Components Suppliers
Short on time? Let Electronic Semi Conductor Devices Other Components sellers contact you.
Electronic control panel for submersible pump for operation of 0.50 hp to 3 hp 1 phase and electrical coustomise panel up to 150 hp in 3 phase. Quality component used in panel for long lastings result and for customer satisfaction
Panels are available in diffrent lot size according to hp wise but 1 box contain min. 20 pcs. Weight n dimension are veries according to product specification
Softwareshouse smart pic programmer
Smart pic programmer is very cost effective and can be used for programming a wide range of pic variants.Comes in two models. Student model and industry model.
We are providing gsm antenna & broad band antenna that is manufactured and designed using latest technology. Our gsm antenna & broad band antenna is highly demanded in the market as it efficiently catches the signal even in low network area and of various frequencies. These gsm external antennas are available in weatherproof industrial grade enclosures. Further, our antennas are appreciated by the clients for highly durability and excellent performance even in extreme environmental conditions. This gsm antenna is available in various sizes and can be customized as per the specifications of the client.
We offer bts antenna that is manufactured and designed using latest technology available. Our antenna is perfectly designed for providing brilliant performance in any magnetic field. Manufactured from the quality raw material, they provide long lasting excellent performance. They have the capability to grasp the signals from various frequencies, even in extreme environmental conditions. Fabricated by our experts in the engineering wing, these antennas conform to the international quality standards.
870-960 mhz
1710 - 2170 mhz
Polarizations
¦ 45¦ slant
¦ 45¦ slant
+û3db horizontal plane
65¦
66¦
+û3dbvertical plane
6.9¦
6.0¦
Gain (dbi)
17.2
17.9
Upper sidelobe level (0¦ to +30¦)
< -18 db
< -18 db
Front to back ratio (180¦¦ 30¦)
> 25 db
> 25 db
Cross polarization level (0¦¦ 30¦)
> 15 db
> 15 db
Isolation
> 30 db
> 30 db
V.S.W.R. (50·)
< 1.5
< 1.5
Intermodulation (2 x 20 w carriers)
< -150 dbc (im3)
< -150 dbc (im3)
< -160 dbc (im7)
Variable tilt
2¦ - 10¦
2¦ - 10¦
Maximum cw input power
500 w
500 w
1) Constant Current Selected automatically depending on
ground conditions
Max. Current 500mA
Min. Current 1mA
2) Voltage (Max) 500 V (1000 Vpp)
3) Power 40W
b. Amplifier
Voltage Measurement
Input Impedance 10 M Ohm
Input Range 0-200V
Precision + 0.05 mV
Noise Rejection 95 dB at 50-60 Hz
c. Resistance Measurement
Apparent R Range m Ohm, Ohm, K Ohm
Apparent R Precision 0.02 m Ohm at 500 mA
d. System Data
Cycle time 12 seconds
Accuracy 2%
Diagnostic display 9 codes
Temp. Range 0 v 50 degree c
e. Power Source 12 Volt, 12 Ah Rechargeable Battery
Measuring capacity 2000 readings at 20 mA
200 readings at 500 mA
f. Weight 12.5 Kg
g. Dimensions L 400mm X W 225mm X H 330mm
Weight 20 kg of instrument Additional Accessaries 60-80 Kg.
Salient Features:
* 4 /8/12Lamps
* 1 Fan
* Fan Speed Control
* Fan Speed 7 Segment Display optional
* Inverter supply compatible
* Very rugged/functions perfectly without being effected by noise and other line disturbances.
* Low Cost
* Kits available
* 4 remote options ready
* Any remote can be used (preprogrammed as per requirement)
