Solar products.
Solar water heater.
Boilers, Thermicfluid Heater.
Food manufacturing machine for example idly steamer and vada making machine, heater such as oil heater and water heater.Transportation
All Type Of Steam Boiler, thermic Fluid Heater And Hot Water Boilers.
Solar water heater.
A cubical furnace has two parts, one is nonmoving shell with combustion system, the other part is used to load, carry, and unload the material to be heated. A furnace used for all other standard applications as mentioned. It also can be used in the applications of specialized treatment processes. Advantages: our furnaces are designed in such a way to reduce the fuel consumption. Combustion/ heating equipments are designed with the thermal equations. Our heating systems will be positioned in order to better heat transfer rate through circulation and re-circulation. Our furnaces are designed for skin temperature of 65?c (maximum) Lining: refractory and insulation bricks and ceramic fiber blankets based on the temperature and operation of the furnace. As per the ISO standard packing.
A cubical shell furnace, which will be stationary furnace, used in melting all kinds of non-ferrous melting, lead oxide kettle, zinc kettle etc., indirect type melting ensures the loss of metals due to oxidation/carbon deposit by the fuel or combustion properties. Furnace is lined with refractory and insulation brick to hold the liquid metal to a temperature of 1200 deg.C. This furnace lining by a brick is formed with extra locks mechanically to ensure the lining the tightness and holds the crucible to not to fall of while tilting the furnace. Our specialties are manual operating furnace, automatic operating furnace, air/fuel ratio regulating system, mass flow control system, pressure balancing system, flue control system.
Atec Tilting Furnace is a Cubical Shell Furnace, which tilts by the Hydraulic/Motorized/Geared mechanism for pouring out the metal directly on the mould/Ladle for heavy Castings. Indirect type melting ensures the Loss of metals due to oxidation/Carbon deposit by the fuel or Combustion Properties. Furnace is lined with Refractory and Insulation brick to hold the liquid metal to a Temperature of 1200oC. This furnace lining by a brick is formed with extra locks mechanically to ensure the lining the tightness and holds the crucible to not to fall of while tilting the furnace.Our furnaces are designed for skin temperature of 65C (Maximum).
A burner made with CI body, has a Primary and Secondary air ports, supplied wit Air Butterfly valves, Burner block, Precise control oil Valve (SOV) as a Package. Burner is used in the applications, where Fuel will be Diesel, LPG, Natural Gas, Producer gas etc., This burner is specially designed to avoid localized Heating. It is designed to give 100% Combustion efficiency even with High carbon oil. Advantages : Fuel Efficient by Better atomization Uniform heat transfer, 10% savings will be possible by interchanging with any make burner. Optional Accessories : Preheated combustion air upto temperature of 350?C (Max) for fuel saving upto 40%.
A cubical shell drier, which is a customized design based on the applications, temperature requirement for these applications vary from 100C to 300C. Driers are also designed with Direct and Indirect type Driers. Drier is lined with Refractory and Insulation brick/ Glass wool insulations to hold the Temperature up to 600 C. Driers will have two chambers in case of indirect type drier. The chambers are firing and Heating Chambers. If in case of Direct type drier, the re circulation fan must be used for the forced heat transfer. Advantages : Our Furnaces are designed in such a way to reduce the Fuel Consumption. Our furnaces are lined with both refractory bricks and Ceramic fibre modules, in such a way to pass the flue Gas around the material to be heated, enabling high conduction convection and Radiation heat transfer. Combustion/Heating Equipments are designed to meet the requirements of furnace and Heat transfer rate. Burner will be positioned inclined to an angle, so that the flame/flue skips on the surface of the material. Better heat transfer rate through circulation and Re-circulation. Our furnaces are designed for skin temperature of 65C (Maximum). Optional accessories : Pre heating the scrap before charging can be done. Recuperator to pass the combustion air into the burner at a temperature of 150C (minimum) for fuel saving upto 40%.
6.4 MVA Furnace Shell Vessel Fabrication We are undertaken For 6.4 MVA Furnace Shell Vessel Fabrication Size 3722 OD: x 2750 H x 32mm Weight 16000 Kgs, Furnace Shell Vessels made out of SA 516 Gr 70 Material. The vessels Consist of 32mm thk Shell, Dished end (32mm), Flange 65mm thk and Air Cooling Jacket.
wood fire bar castings are made with high grade raw material and available in many sizes details : available sizes ( 450 mm / 600 mm ) benefits : Good wear resistance Hold up great load, have a good degree of resistance against erosion. The weight depends on the application needed. The mechanical attributes are superior to different other metal casting products. Note : Our huge range of fire bars and support bars come in all shapes and sizes ensuring you will find the perfect size to match your boiler needs. We have a massive variety of different styles and sizes to suit 99% of industrial boilers, whether you are buying new or replacing for an boilers .
Energy efficient furnace, rotary furnace, rotary kilns, combustion equipment, industrial burners, dual fuel burner, oil burner, gas burner, industrial blowers, ovens.
Electrical furnace, fuel fired furnace, industrial burners, furnace burners, industrial blowers, combustion equipment, driers, ovens, rotary kilns, pumping and heating unit.
Furnace.
Steam boilers, hot water boilers, thermic fluid heaters.
Furnace, oven, dryer, induction furnace, vacuum furnace, heat treatment furnace, rolling mill preheating furnace, smelting furnace, pulverizer, special purpose machines, conveyor oven, continuous hardening furnace, computerized fully automatic furnace, sand dryer, air dryer, vessel dryers.Industrial automation, computerized process control, testing and calibration
Medium frequency induction melting and heating equipment, combustion system, industrial blowers and burners.
Tilting type rotary furnace, rotary furnace, industrial burners, industrial blowers.
