Black Single Plate Easel is a beautiful and decorative way to display your favorite plate, work of art, or book. It has a simple design that will not distract from the item the easel is holding.
Black Single Plate Easel is a beautiful and decorative way to display your favorite plate, work of art, or book. It has a simple design that will not distract from the item the easel is holding.
Black Single Plate Easel is a beautiful and decorative way to display your favorite plate, work of art, or book. It has a simple design that will not distract from the item the easel is holding.
Black Single Plate Easel is a beautiful and decorative way to display your favorite plate, work of art, or book. It has a simple design that will not distract from the item the easel is holding.
The glass table looks great in any home with its warm colours - The tone matches any interior decoration, whether retro, modern or vintage.Simple and generous design,but also has a small and flexible, very useful for the placement of life items.
Drum heaters and IBC container heaters provide heat to the contents of industrial packaging such as :
Cans,
Drums,
IBC containers.
Drum Heating Ovens
Depending on the application, heat is supplied in order to:
Temper the contents so that they may be kept at an optimal processing temperature
Reduce the viscosity of a fluid so that it may be pumped or emptied more easily.
Hinder crystallization or flocking of fluids;
Melt lubricants.
The heating Jackets for Drums consist of flexible heating Jackets that are placed directly around the containers to be heated and then attached to them. Therefore, references such as heating jackets, heating jackets, heating belts, and
Nasir Bespoke is the best designe store in Dehradun for mens wear. Best collections of Indian wear, jackets, Western wear, Designer suits, corporate suits, kurta pajamas, sherwanis.
PRODUCT HIGHLIGHTS
Graphite filled
electrically conductive
Non-magnetic
Offers good lubricity
Ideal for static dissipation and grounding
First-rate dimensional stability
Very good shielding against EMI/RFI
Kohesi Bond KB 1085-1 is a two component, graphite filled epoxy system suitable for bonding, sealing and coating. It has a favorable 100:15 (Part A: Part B) mix ratio by weight. Firstly, it offers very good electrical conductivity and a outstanding dimensional stability. This epoxy system readily cures at room temperature and can achieve faster cures at elevated temperatures. The optimal cure schedule is an overnight room temperature set-up followed by a heat cure at 70°C - 90°C for 3 - 5 hours.
KB 1085-1 offers a volume resistivity of 50 - 100 ohm-cm. This makes it ideal for static dissipation, grounding and EMI/RFI shielding applications. Being graphite filled, this product is non-magnetic in nature and offers slight lubricity. It offers an extensive serviceable temperature range of -50°C to +120°C. It is a phenomenal adhesive that offers superb physical strength properties and adheres well to a wide variety of substrates including metals, ceramics, most plastics and glass. In addition to superior electrical, it also offers astounding chemical resistance to a variety of acids, bases, oils and water. Part A and Part B are black in color. Owing to its versatile performance, KB 1085-1 is widely used in electronics, aerospace, semiconductor, microwave and many OEM applications where a non-metallic conductive epoxy is required.
PRODUCT HIGHLIGHTS
Superior thermal conductivity
Excellent toughness
Convenient 1:1 mix ratio
First-rate thermal conductivity
Exceptional electrical insulation properties
Capable of passing NASA low outgassing
Kohesi Bond TUF 1621 AOHT is a two component, room temperature curing epoxy system suitable for bonding and sealing. It is capable of passing NASA standards for low outgassing (ASTM E-595) and has a convenient 1:1 (Part A: Part B) mix ratio by weight or volume. This unique epoxy system offers remarkable toughness and superior peel strength. It readily cures at room temperature and can achieve faster cures at elevated temperatures. The optimal cure schedule is an overnight room temperature set-up followed by a heat cure at 70°C - 90°C for 3 - 5 hours.
TUF 1621 AOHT is thermally conductive and it can withstand very high temperatures. It offers an extensive serviceable temperature range of -70°C to +200°C. This phenomenal adhesive fosters outstanding resistance to mechanical and thermal shocks. It offers exceptionally high lap shear strength (> 3,300 psi). TUF 1621 AOHT adheres well to a wide variety of substrates including metals, ceramics, most plastics, rubbers and glass. In addition to superior electrical insulation, it also offers very good resistance to various chemicals, such as water, oils and fuels. Part A and Part B are off-white in color. TUF 1621 AOHT is widely used in electronic, optoelectronic, vacuum, aerospace and related industries.
PRODUCT HIGHLIGHTS
Unrivaled electrical conductivity
Offers cost effectiveness
Very good shielding effectiveness
Resists more than 370°C
Effective moisture barrier
Ease of application
Kohesi Bond KB-SS-SCN is a silver coated nickel filled, sodium silicate based coating system. Firstly, this product offers very good electrical conductivity. This products offers very high levels of shielding towards electromagnetic interference (EMI) and radio frequency interference (RFI), along with cost effectiveness. Shielding effectiveness is extremely critical for electronic devices, since energy from various appliances such as radios can interfere with their performance. Our conductive coatings are usually applied to housing substrates to protect the devices from any such interference.
Shielding effectiveness is measured by attenuation, which refers to the difference in an electromagnetic signal's intensity before and after shielding. The unit of measurement is in decibels (dB). Achieving shielding at higher frequencies is extremely challenging. From 1-2 GHz, KB-SS-SCN's effectiveness is in the range of 75-42 dBs, similar to an aluminum reference. This rating slowly declines to 56-42 dBs at 2-15GHz and further down to 50 dBs at 18 GHz, at which point it stabilizes. It should be noted that the decibel range of attenuation falls along a logarithmic scale. A 10 dB difference in attenuation indicates a 10 times change in shielding effectiveness.
KB-SS-SCN has a wide serviceable temperature range of -18°C to +370°C. It is a water based system, making it relatively non-toxic. This product can be easily applied with a brush or a spraying system. It can cure at room temperature in 1-2 days or it can be heat cured at 80°C for 1-2 hours.
PRODUCT HIGHLIGHTS
High glass transition temperature
Resists thermal and mechanical shocks
Very good flow properties
Superior chemical resistance
Exceptional electrical insulation properties
Phenomenal toughness
Kohesi Bond TUF 1452 HT-2 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 100:40 (Part A: Part B) mix ratio by weight or 100:50 (Part A: Part B) mix ratio by volume. This unique epoxy system offers remarkable adhesion to wide variety of substrates including metals, ceramics, most plastics and glass. It readily cures at room temperature and can achieve faster cures at elevated temperatures. The optimal cure schedule is an overnight room temperature set-up followed by a heat cure at 70°C - 90°C for 3 - 5 hours.
TUF 1452 HT-2 is a toughened system, offering low exotherm and a long working life. It can withstand multiple cycles of thermal and mechanical shocks. It offers an extensive serviceable temperature range of -60°C to +220°C. This phenomenal adhesive fosters outstanding physical strength properties as well as dimensional stability. It offers minimal shrinkage upon cure and is suitable for medium sized castings. In addition to superior electrical insulation, it also offers astounding chemical resistance to a variety of acids, bases, solvents, fuels, oils and water. Part A has a tan-brown color and Part B has an amber color. TUF 1452 HT-2 is widely used in the electronics, aerospace and various OEM applications.
these are basically used to protect the body from negative temperatures on board and at work places which involve the use of cold storage refrigerators and specially polar regions .
some features :-
- adjustable elastic waist cord
- front pockets with flaps
- inner pockets and hand warmer pockets
- 2 inch reflective tapes .
- fixed hood
- outer shell polyster
To meet the precise demands of clients, we offer a wide range of Men's Hooded Jacket. These Men's Hooded Jackets are acclaimed for their optimum quality, smooth texture and fine finish.
ri Sharadamba Fashions is name which is revered in market as it provides world class leather wears. The organization came into formation in the year 2000 as a Sole Proprietorship firm at J.C. Industrial Area, Kanakapura Main Road, Bengaluru, Karnataka. We are prominent manufacturers, traders, suppliers and exporters of Leather Jackets, Leather Trousers, and Leather Waistcoats. The entire range is well known for its exclusive features which are at par with international quality ensuring huge satisfaction to the clients. The products are in huge demand as they are developed using best grade materials, fine stitching, awesome finish, elegant looks are some of the other properties which help them to become the first choice of clients. We are moving with the fashion trends prevailing in the market and it is providing us the much needed edge to provide a range which receives huge appreciation from vast clientele.
We have incorporated several quality control measures in our business to maintain high end delivery in market. Our products are hailed not only by domestic customer but they also find huge appreciation from our international level customers for their durability and elegance. We are committed to use top grade quality leather in generating the wide range of garments that is procured after in-depth testing and scrutiny by our procurement professionals. Every item is designed and stitched as per the customers’ demand to suit their current desire.
