PRODUCT HIGHLIGHTS
Graphite filled
electrically conductive
Non-magnetic
Offers good lubricity
Ideal for static dissipation and grounding
First-rate dimensional stability
Very good shielding against EMI/RFI
Kohesi Bond KB 1085-1 is a two component, graphite filled epoxy system suitable for bonding, sealing and coating. It has a favorable 100:15 (Part A: Part B) mix ratio by weight. Firstly, it offers very good electrical conductivity and a outstanding dimensional stability. This epoxy system readily cures at room temperature and can achieve faster cures at elevated temperatures. The optimal cure schedule is an overnight room temperature set-up followed by a heat cure at 70°C - 90°C for 3 - 5 hours.
KB 1085-1 offers a volume resistivity of 50 - 100 ohm-cm. This makes it ideal for static dissipation, grounding and EMI/RFI shielding applications. Being graphite filled, this product is non-magnetic in nature and offers slight lubricity. It offers an extensive serviceable temperature range of -50°C to +120°C. It is a phenomenal adhesive that offers superb physical strength properties and adheres well to a wide variety of substrates including metals, ceramics, most plastics and glass. In addition to superior electrical, it also offers astounding chemical resistance to a variety of acids, bases, oils and water. Part A and Part B are black in color. Owing to its versatile performance, KB 1085-1 is widely used in electronics, aerospace, semiconductor, microwave and many OEM applications where a non-metallic conductive epoxy is required.
z
Model SD190 Capacity Gross Volume 190L Net Volume 165L Dimension Product (W*D*H) 1025*596*814mm Packing (W*D*H) 1085*656*860mm Function Thermostat Mechnical Indicator Red red compressor on indicator Wheels 4universal,diameter 33mm Scraper 1 / ABS Drain Pipe Yes Lock optional Thermometer optional Basket 1 Performance Test Condition 38oC, 40-70%RH Test Results 50 Mohm Grounding Rsistance
PRODUCT HIGHLIGHTS Unrivaled electrical conductivity Offers cost effectiveness Very good shielding effectiveness Resists more than 370°C Effective moisture barrier Ease of application Kohesi Bond KB-SS-SCN is a silver coated nickel filled, sodium silicate based coating system. Firstly, this product offers very good electrical conductivity. This products offers very high levels of shielding towards electromagnetic interference (EMI) and radio frequency interference (RFI), along with cost effectiveness. Shielding effectiveness is extremely critical for electronic devices, since energy from various appliances such as radios can interfere with their performance. Our conductive coatings are usually applied to housing substrates to protect the devices from any such interference. Shielding effectiveness is measured by attenuation, which refers to the difference in an electromagnetic signal's intensity before and after shielding. The unit of measurement is in decibels (dB). Achieving shielding at higher frequencies is extremely challenging. From 1-2 GHz, KB-SS-SCN's effectiveness is in the range of 75-42 dBs, similar to an aluminum reference. This rating slowly declines to 56-42 dBs at 2-15GHz and further down to 50 dBs at 18 GHz, at which point it stabilizes. It should be noted that the decibel range of attenuation falls along a logarithmic scale. A 10 dB difference in attenuation indicates a 10 times change in shielding effectiveness. KB-SS-SCN has a wide serviceable temperature range of -18°C to +370°C. It is a water based system, making it relatively non-toxic. This product can be easily applied with a brush or a spraying system. It can cure at room temperature in 1-2 days or it can be heat cured at 80°C for 1-2 hours. z
