Find Verified Batteries Chargers Suppliers, Manufacturers and Wholesalers

Microtex traction cell is assembled in a high-grade plastic container containing high performance tubular positive plates in premium energy bags. Microtex traction cells deliver consistent reliable power. Our product is suitable for all weather condition. Water loss and maintenance is minimum. Microtex traction batteries are used in electrically powered vehicles like the forklift, Pallet Truck, Scissor Lift and any other industrial traction applications. Microtex lead acid traction batteries are manufactured in India by Microtex Energy P Ltd. for more than two decades. The unit has a well established modern battery manufacturing facility with a fully equipped chemical and electrical laboratory at Peenya, Bangalore. Microtex traction batteries are used in electrically powered vehicles like a forklift, tow truck, power trolley, lifting platforms and other industrial traction applications. These traction batteries are made to BS & DIN specification.

Constructional Features:


Each traction cell is assembled in a high grade plastic container
The container containing high performance tubular positive and pasted negative plates. The positive and negative plates are separated by high-quality PE Separators
The tubular positive plates have specially designed spines, cast from corrosion resistant lead-antimony-selenium alloy ensconced in the tubular bag which is Vibro-filled
The pasted negative plates made up from a blend of oxide, special additives and expanded, aid in cell longevity
The high-quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance
The high-grade plastic containers are non-reactive to acid, temperature and the gases emitted by the cell
Short-circuit between plates due to sediments is avoided by the use of a prismatic sediment spacer placed at the bottom of the plastic container on which the plates rest
The splash-proof vent plugs prevent the escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell

Microtex electric multiple unit or emu battery is made up of 5 cells of 2 volts each. The cells assembled in molded monoblock hard rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. Water loss and maintenance is minimum delivers consistent reliable power. Microtex lead acid EMU batteries are manufactured by Mysore Thermo Electric Private Limited.

Microtex EMU Battery is made up of 5 cells of 2 Volts each. The cells assembled in Molded Monoblock Hard Rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. The Microporous Vent Plugs fitted to the cells prevent the spilling of the electrolyte.

Constructional Features:

Each cell assembled in Monoblock Hard Rubber container containing Microtex hi-performance tubular positive plates in premium Energy Bags Acrylic Gauntlets bags, pasted negative plates manufactured under exacting control to withstand rough handling and electrically separated by high quality PE Separators
The tubular positive plates have specially designed spines casts from corrosion resistant lead antimony-selenium alloy ensconced in tabular bag which is vibro-filled with active material and pickled, thus ensuring high-rate discharge, more capacity for a given volume, greater shock resistance and long life with excellent reserve capacity
The pasted negative plates, made up from a blend of oxide, special additives and expander, aid in cell longevity
The high quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance.
Short-circuit between plates due to sediments is avoided by the use of sediment spacer at the bottom of the container on which the plates rest.
The Microporous vent plugs prevent escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell


Special Features:

The low antimony content in the grid alloy ensures low gassing
Water loss and maintenance is minimum
Corrosion is negligible
Very low self-discharge and internal resistance
Excellent reserve capacity
Delivers consistent reliable power
Suitable for all weather conditions
Long life cycle

We provide you with the best quality of battery at a reasonable prices.

10400 mah power bank for mobiles







300gm in a piece

Key Features [full spec]

✔ Output Power: 0.85 KVA
✔ Voltage: 12 V
✔ Technology: Higher end Micro-Controller based design
✔ WaveForm: Pure Sine Wave
✔ Recharge Time: 4 Hr(s)
✔ Warranty: 2 Year(s)
✔ Features: Battery deep discharge protection, Fuzzy Logic Control a unique and advanced technology that protects the Battery, Higher end Micro Controller based design, Reduces Frequency of water Topping And Enhances Battery Life, Surface Mount Technology for PCB Cards, User Friendly Graphical Display with audible alerts

8.5 Kg

This DC-DC Converter is designed to provide 110V to 24V power conversion for heavy duty applications. High efficiency, high precision DC to DC Converter unit. Wide input voltage range, with over-current and over-voltage protection function.
Model No: DLS-11024DC
Input Voltage: 110V DC
Output Voltage: 24V DC
Output Current (A): 1, 3, 5, 8, 10, 12 A

This battery charger is designed charge 12V battery from 48V DC Power Supply. High efficiency, Battery Charging unit. Wide input voltage range, with over-current and over-voltage protection function.
Model No: DLS-4812BC
Input Voltage: 48V DC
Output Voltage: 13.8V DC
Output Current (A): 1, 3, 5, 8, 10, 12 A

This voltage converter is designed to provide 48V to 24V power conversion for heavy duty applications. High efficiency, high precision DC to DC Voltage Converter unit (SMPS). Wide input voltage range, with over-current and over/under voltage protection function.
Model No: DLS-4824DC
Input Voltage: 38-62V DC
Output Voltage: 24V DC
Output Current (A): 1, 3, 5, 8, 10 A

This buck DC Converter is designed to provide 110V to 12V power conversion for heavy duty applications. High efficiency, high precision DC to DC Converter unit. Wide input voltage range, with over-current and over/under voltage protection function.
Model No: DLS-11012DC
Input Voltage: 100-130V DC
Output Voltage: 12V DC
Output Current (A): 1,3, 5, 8, 10, 12 A

This product has a unique integrated design and strong structure which can be used outdoor and in rainy environment. It could also withstand the crushing of a vehicle. This Type 2 (Male) Type 2 (Female) Cable permits Single phase 32Amps of charge to flow into the electric vehicle. It used to connect vehicle with EVSE Socket (Female) to Electric Vehicle Inlet Socket (Male)JT Mobility mode 3 charging cable is a connector cable between the charging station and the electric car. To allow electric cars to be charged using type 2 plugs. This cable works on all charging stations mode 3 according to standards ISO 17409 and IEC 61851. It is compatible with all the charging stations and all EV rechargeable vehicle with type 2 standard. This cable will work safely on all charging stations, even the ones with inferior or superior charging power