Modular UPS H. S Code : 85044090
Accenta Memo Plus RT UPS H. S Code : 85044090
Renata EP Series UPS H. S Code : 85044090
The fls package includes a hydraulically separate lubrication and lubricating oil dehydration system, a hydraulic fluid supply and conditioning system and common control console in a single. The fluid system package can mount separately from the steam turbine-generator or be installed integrally with the turbine base. Full feature design Redundant ac motor driven pumps for both lubrication and hydraulic service Duplex lubricating oil filters and oil coolers Dc motor driven emergency oil pump Integral lubricating oil dehydration system Lubricating oil mist elimination system
Back pressure turbines can either be single stage or multi-stage which are often used in industrial plants, the turbine serves as a reducing station between boiler and the process steam header. These turbines can either be used for drive application (sugar mill drives, sugar fibrizor / shredder drive, pump drives and so on) or power generation application in which case the turbine drives the generator. These turbines are straight-back pressure type and find application where back pressure steam is fully utilized to meet process demands. The power generation is incidental to the process steam demand. The back pressure turbine may also have bleed points (uncontrolled extractions) to satisfy steam demands at intermediate pressures, this provision is applicable when the bleed (medium pressure) steam volume demand is low and pressure variations can be tolerated. These turbines are of bleed cum back pressure type.
The extraction condensing turbines are used when a constant pressure steam flow has to be extracted for process purposes. The constructional characteristics of these turbines are very similar to condensing turbines from the second admission valve chest it is possible to inject low pressure steam, available in the plant to supply the power required by the plant. These turbines are typically used for co-generation where the turbine meets both the power and steam demand of the process plant. In these type of turbines the power generated can be maintained more or less at a steady level despite
The condensing turbines take high pressure steam, expand it in turbine nozzles and blades, and exhaust it to a condenser at lower than atmospheric pressure. It is principally used when power must be generated with minimum steam consumption. The condensing turbine may also have bleed points (uncontrolled extractions) to satisfy steam e. These type of turbines find application mainly for power generation where bleed steam is required for feed water heating (hp heater, lp heater and deaerator requirement) and / or where bleed steam is utilized to meet small process demands.
Feed pump turbine drive packages are available from 100kw – 20mw. Complete steam turbine boiler feed pump packages are available, in addition to stand-alone steam turbine packages. 7 models, horizontal (axial and radial split), vertical , api 611- and 612-compliant, overhung and between-the-bearings wheel designs, metallic or carbon seals, electronic / hydraulic mechanical governors, customized steam path components, mechanical / electronic safety trip system, direct-drive or integral gear boxes with suitable lubrication systems.
Gp envie and many brands available
Model MPS-01,02,04,05 i/p power-415v,+/-10%,2 phase Frequency-50/60hz o/p power: Voltage-95VDC Current-6 Adc(max) 80*90*30mm, 650gms(moulded)
UPS Available in on line & off line range from 500va to 10kva
Stabilizer 1 unit per box
We are leading manufacturers & suppliers of best quality OPZS cells in India. Microtex OPzS Batteries are used in Power Generating Stations, Sub Stations, nuclear power plants, Off Shore rigs and petrochemical plants for critical standby power. These are special tubular plate flooded lead acid batteries made with unique calcium alloys and designed to perform in both high cycling and float applications, ready to deliver, the full capacity at the critical moment when it is required. They are housed in distinctive High Impact Transparent SAN (Styrene AcryloNitrile) containers to visually inspect condition of plates inside the cell. Batteries are optimally designed with balanced active materials to provide a 20 year float life. Key Features: Specially designed Calcium lead alloys for positive and Low antimony selenium alloys negative grids, provides better current conductivity to the terminals with lower internal resistance. Presence of Tin and special grain refiners ensure a high performance plates resistant to grid corrosion. The special Calcium alloys prevent water loss and reduces the watering intervals in usage, this is a big positive factor for the maintenance team High efficiency with accurate and optimum balanced active materials, provide consistent capacity reliably. Tubular Spine grids with a Diameter 3.20 mm cast at over 150 bar pressure in high Pressure Die casting machines for positive plates, ensures the lead is packed with high density which resists acid corrosion - ensures the life of 20 years in the positive plates which usually are otherwise prone to corrosion. Designer Ceramic Vent plugs to trap water and allow only gases to pass through minimizes water loss in the cell. High impact ABS cover with large polarity indication enhances cell safety and easy visual of terminal polarity Hardened lead alloy with copper insert terminal posts â?? provide faster conductivity and fail proof connections requiring less maintenance Patent applied for, Smart Terminal pole bushing with rubber grommets, stops acid creep and corrosion and allows for movement upwards due to the natural growth of positive terminal which usually occurs after the 7th year of service, ensuring no breakage of cover in its designed service life. Batteries are supplied with factory pre formed plates. This ensure for reliable performance and no excess cycling required in the field to obtain rated capacity. Saves time for critical users. Batteries if required can be supplied with Seismic qualified stands with special acid proof coating. Microtex OPzS Batteries generally conform to DIN 40 736 part 1, IS1651-1993, Tests according to IEC 60 896-11 and safety standards, ventilation DIN EN 50 272-2 Microtex is an ISO 9001 and ISO 14001 certified company
Microtex stationary vrla opzv cells are maintenance free gel lead - acid type with long life. In applications with high requirements of operational safety and bridging times of 1 h to more than 10 h. 20 years in standby float operation at 27 °c. Maintenance free. No topping-up water during the operational life. Microtex opzv cells are maintenance free gel lead-acid type with long life. In applications with high requirements of operational safety and bridging times of 1 h to more than 10 h the microtex opzv is the right choice. Microtex stationary opzv cells are used in telecommunication sectors, for emergency lighting, for microwave radio and solar photovoltaic systems and also in power generating plants. Charging: Iu-characteristic- Imax without limitation U=2.25v/cell +/-1%, between 10 °c and 45 °c U/t= -0.003 v/k Float current: 20-30 ma/100 ah Discharge characteristics: Reference temperature: 25 °c Initial capacity: 100% Depth of discharge (dod): normally up to 80% Deep discharges: more than 80% dod or discharges beyond final discharge voltages (based on discharge rate) have to be avoided
Medical Battery for ECG Machines
12v 8ah lithium battery for robotics
Ebikes lithium battery packs
Type Lithium ion battery Nominal voltage 48V Nominal Capacity 30Ah Dimension customized Weight Approx: 7kg Max.charge current 1.0C Max.discharge current 30-50A Charge current Standard Charging: 0.5C Rapid charge: 1.0C Standard Charging method 0.5C CC(constant current)charge, then CV(constant voltage)charge till charge current decline to =0.05C Charging time Standard Charging: 2.75 hours(Ref.) Rapid charge: 2 hours(Ref.) Cycle life >500 times Operating temperature Charging: 0 °C ~+60 °C Discharging: 0 °C ~+60 °C Storage temperature -20°C~+60 °C
Product Description: Specification: 1. Normal Voltage:36Volts. 2. Lifecycle: 800Cycles.. 3. Capacity: 20Ah. 4. Charge Current: 4Amps. 5. Maximal Continuous Discharge C-Rate: 50Amps. 6. Maximal Discharge Current: 100Amps. 7. Overvoltage Protection: 42Volts. 8. Undervoltage Protection: 28Volts.
Product Description: Lithium Phosphate high ampere battery pack LiFePO4 battery type 48V60AH Minimal capacity(0.5C) 60Ah Nominal voltage 51.2V Max. charge voltage 58.4V Discharge cut-off voltage 40V Max charge current (0.5C)30A Max working current (1C)60A Standard charge current (0.2C)12A Standard discharge current (0.5C)30A Pack Impedance standard =100 mO Weight (Approx.) ˜36Kg Operating temperature Charge temperature 0?~45? Discharge temperature -20?~55? BMS Single cell over-charge cut-off voltage 3.7V over-charge release voltage 3.35V Single cell under-discharge cut-off voltage 2.5V Discharge release voltage
