* Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack.
1). Surface preparation and application of Primer: Refer application method of Primer.
2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes.
CHEMICAL RESISTANCE PROPERTIES:
* Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats
STORAGE & PACKING:
* Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs.
HEALTH & SAFETY:
* Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : RED SHALE Type Acid Resistant Brick
Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions
Heavy thermal shock
Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick
Characteristic
RED SHALE ACID RESISTANT BRICK
Test Standard
Bulk Density, gm/cc - 2.3 to 2.35
ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968
Apparent Porosity, % -0.5 to 1.75 S 4860
Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279
Modulus of Rupture, PSI -2133 to 3555 ASTM C-67
Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968
Abrasion Resistant , Volume in mm3 -69 to 85 EN 102
Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : FIRECLAY Type Acid Resistant Brick
Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
* We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
* Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions - Heavy thermal shock
Characteristic
Fireclay Type Acid Resistant Brick - Test Standard
Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20
Water Absorption, % - 0.1 to 1.8 ASTM C-20
Apparent Porosity, % - 4.05 to 4.14 ASTM C-20
Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279
Modulus of Rupture, Mpa - 14.6 ASTM C-67
Compressive Strength, PSI - 15500 to 17250 ASTM C-67
Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102
Surface Hardness, MOHS Scale - 7
Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236
Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
WFH Employee Kit
This Kit includes
1. Temperature Display Bottle
2. A5 Strap Diary
3. Cotton Mask
4. Two Tone Mug
5. Metal Pen
6. Sanitizer
7. Welcome Note
ALUMINA MORTAR (Test Certificate)
General Properties
A. Max service temperature - 1500 oC
B. Maximum grain size - 0 - 1.5 mm
C. Water required for mixing - 22 - 30%
D. Setting - Airsetting
E. Sintering Temp - 1550 oC
Chemical Properties
A. Al2O3 - 50.00%
B. SiO2 - 31.00%
c. Fe2O3 - 5.00%
D. LOI - 7.00%
Physical Properties
A. Dry Density - kg / m3
B. CCS - 17 kg / cm2 after drying at 110C / 24 hr
C. MOR - 20 kg / cm2 at 110 oC/ 24 hr
18 kg/cm2 at 800 C/ 3 hr
Thermal Properties -
A. Refractoriness ( Orton / C) - 31.5 orton cone/1699 oC
Packaging - 25 - 50 kg bags
Storage Life - 12 months
Delivery State - Dry
In collaboration with Tech Innovate Mobility, NexEase International offers e-cycles featuring cutting-edge technology for enhanced riding comfort. Perfect for personal use or rental fleets, our eco-friendly electric bicycles reduce carbon emissions, contributing to cleaner urban environments through sustainable mobility solutions. Additionally, we provide White Labelling services for our clients, allowing them to brand these high-quality e-cycles as their own. We also provide conversion kits for those looking to upgrade their existing bicycles to electric.
Our GMO soybeans from Brazil are cultivated with advanced genetic traits to enhance yield and resilience. Grown in the fertile soils of Brazil, these soybeans are meticulously selected and processed to maintain their quality and nutritional value.
Key Features:
Origin: Brazil
Genetic Traits: Engineered for higher yield potential and resistance to pests and diseases
Applications: Ideal for various uses including food production, animal feed, and industrial applications
Sustainability: Produced using modern agricultural practices to support environmental stewardship
Why Choose Us?
Quality Assurance: Rigorous testing ensures GMO traits and nutritional integrity.
Reliable Supply: We guarantee consistent availability to meet your business demands.
Global Reach: Efficient logistics ensure timely delivery worldwide.
Innovation: Leading-edge technology supports continuous improvement and sustainability.
Trust our GMO soybeans from Brazil for superior quality and performance in agricultural and industrial applications.
GFRP rebar is made of high-strength glass fibers along with a highly durable resin. These
products are developed as a superior alternative to steel in concrete reinforcement. It is
widely used to reinforcing concrete in applications where it is exposed to water, salt water
or chemical environments
- Typical Advantages:
- Non-Corrosive â?? It will not corrode when exposed to a wide variety of corrosive substances
- including chlorides
- High Strength-to-Weight Ratio â?? best reinforcement for weight sensitive reinforcement
- Non-Conductiveâ?? It is excellent electrical and thermal insulator
- Excellent Fatigue Resistanceâ?? performs best in cyclic loading solutions
- Impact Resistanceâ?? It resists sudden and severe point loading
- Magnetic Resistance â?? completely non-effective to electromagnetic fields; excellent for
use in electromagnetic testing facilities
- Light Weight easy to transport, no need for lifting equipment, easy to handle
Pathoworld in bopal, ahmedabad offers urine testing services. urine tests are commonly performed to assess various aspects of a person's health.their highly skilled and experienced technicians collect a urine sample from the individual. the sample is then analyzed using advanced laboratory equipment and .
Honey is a natural sweet substance produced by bees from floral nectar. It is widely used in food, pharmaceuticals, cosmetics, and traditional medicine. Below are the general specifications for honey:
Physical Properties:
Appearance: Thick, viscous liquid or crystallized form
Color: Light amber to dark brown (varies based on floral source)
Odor & Taste: Pleasant, characteristic honey aroma and sweet taste
Texture: Smooth, free from lumps or impurities
Moisture Content: Max 18-20%
Solubility: Completely soluble in warm water
Chemical Properties:
Fructose Content: 38-42%
Glucose Content: 28-32%
Sucrose Content: Max 5%
Total Reducing Sugars (Fructose + Glucose): Min 65%
Acidity: 0.2 - 0.5% (expressed as formic acid)
Ash Content: Max 0.5%
pH: 3.5 - 5.5
Hydroxymethylfurfural (HMF): Max 40 mg/kg (as per international standards)
Diastase Activity (Amylase): Min 8 DN (Diastase Number)
Proline Content: Min 180 mg/kg (indicator of natural honey)
Microbiological Standards:
Total Plate Count: Max 1,000 CFU/g
Yeast & Mold: Max 200 CFU/g
Coliforms: Absent
E. Coli: Absent
Salmonella: Absent
Clostridium Botulinum: Absent
Contaminants & Adulterants:
Pesticide Residues: As per country-specific regulations (FSSAI, EU, FDA)
Heavy Metals:
Lead (Pb): <0.1 ppm
Cadmium (Cd): <0.05 ppm
Arsenic (As): <0.1 ppm
Mercury (Hg): <0.05 ppm
Antibiotics & Drug Residues: Must be absent
Artificial Additives & Preservatives: Must be absent
Added Sugars or Glucose: Must be absent (tested by C4 sugar analysis)
Applications of Honey:
Food Industry: Used in bakery, confectionery, dairy, beverages, and cereals
Pharmaceuticals & Ayurveda: Used in cough syrups, herbal medicines, and wound healing
Cosmetics & Personal Care: Used in skincare, hair care, and beauty products
Beverages: Used in herbal teas, energy drinks, and fermented honey drinks
Industrial Use: Used in fermentation, alcoholic beverages, and honey-based syrups
CORTEX is pioneered in manufacturing of surgical kits and gowns. To fight against COVID-19 Cortex has developed Personal Protective Equipment at its best quality. We have various categories in PPE kits according to the requirement in different sectors. Kits are totally customized.
Contents of the Kit:
Coverall with hood (also available with attached Shoe Cover)
Available in all types of fabrics with SITRA and DRDO certificates
3 ply mask / N95 mask
Safety Goggles
Face shield
Nitrile gloves/Surgical Gloves
Shoe cover Knee Length
Any extra items as per customer requirement can be provided.
COTSAFE is 100% Pure Cotton Anti-Viral Coverall available as with seam and without seam, and other wearable like Gowns, and Scrubs which are having Excellent Breathability, Fantastic Impermeability, Anti-Bacterial, and Anti-Viral with 99.94 % Effective Against Corona Virus (As per Healthguard�® Claims). This can be reusable upto 15 times.
COTSAFE can be used by all Primary/Secondary/Tertiary healthcare workers.
It includes Protective Coveralls, Mask, Face Shield, Caps, Shoe Cover (PPE KITS) gloves and many more.
Out of the above gears the coverall quality is of utmost importance in terms of 1) Permeability to protect from outside, and 2) Breathability to make Healthcare Professionals comfortable because of its long hour use.
All other coveralls are made-up of Non-woven SSMMS Meltblown Polypropylene fabric, which are definitely effective in Permeability and Protection, but they are neither comfortable nor environmental friendly, because they cannot be recycled. This Non-Woven protective clothing is usually worn for long durations that lead to adverse skin problems in many healthcare workers. These adverse reactions include- rashes, dry skin, itching, wheals, sweat herpes, muggy heat and dampness.
594 Vtm Test Kits Suppliers
Short on time? Let Vtm Test Kits sellers contact you.
