Garnet abrasive 1) Sandblasting grade 2) Waterjet Cutting grade Sandblasting Grade Blasting grade Garnet from Global Exim Corpn., can be used for Blast Cleaning of ships, oil rigs, oil pipes, oil storage vessels, Water tanks, boilers, railcars & wagons, pipes etc. with highest efficiency and low dust levels. Our Garnet is extremely hard and can be reused upto 5 times or more. Mesh Sizes available are 12-24, 20-40, 20-60 30-60 Waterjet Cutting Grade Waterjet Cutting grade of Garnet is found to be effective in cutting stainless steel, titanium, alloys, granites glasses etc. with high accuracy to any geometrical shape. Our Garnet is of Indian origin, which is harder and heavier, hence it cuts faster. We are specialised in this grade of Garnet. Mesh Sizes available are 80 and 120. How these garnets are processed & graded: The raw materials are pre-concentrated using the magnetic separator. To make contamination free garnets, the concentrated materials are washed in the main unit and then they are dried using the fuel operated rotary dryer. The dried material is processed with high power magnetic separators to attain 97% - 99% pure garnet. Garnet is screened accurately according to the customer's need to produce consistent top quality garnet with hi-tech screening machines. Packing available are:- 1) 25 or 50 kg Polypropylene bags with inner liner. 2) 25 or 50 kg Multi-ply Paper bags with inner liner. 3) 1 ton or 2 ton Jumbo bags with inner liner. 4) 1 ton or 2 ton wooden pallets with plastic Shrink-wrap or Stretch wrap. 5) 1 ton or 2 ton High sided wooden pallets
Blasting grades Blasting grade garnet can be used for blast cleaning of ships, oil rigs, oil pipes, oil storage vessels, water tanks, boilers, railcars & wagons, pipes etc. With highest efficiency and low dust levels. Iogs garnet is extremely hard and can be reused up to 5 times or more. Garnet sand water jet cutting grades Our garnet with precise size and low dust is found to be effective in cutting stainless steel, titanium, alloys, granites glasses etc. With high accuracy to any geometrical shape. Our garnet is of indian origin, which is harder and heavier, hence it cuts faster. We are specialized in this grade. 25 or 50 kg polypropylene bags with inner liner. 25 or 50 kg multi-ply paper bags with inner liner. 1 ton or 2 ton jumbo bags with inner liner. 1 ton or 2 ton wooden pallets with plastic shrink-wrap or stretch wrap. 1ton or 2 ton high sided wooden pallets
It is available in diffrent sizes Same as above
Cut wire shots in carbon steel, mild steel, aluminium, zinc, ss for shot blasting and shot peening. The size range is from 0.40mm to 2.00mm. 25 kgs bags
Abrasives
Emery stone Emery grains is used in mfg. Of emery stone. 50 kg. Bag.
Synthetic emery Al2o3 -- 55%, fe2o3 -- 25% 50 kg bag packing , as per customer specification with special requirement.
Sleeve Spiral bands (abrasive sleeves) are spirally wound single ply of coated abrasive used on expanding rubber drums (rubber mandrels). The unique construction of spiral bands provides smooth, chatter-free operation, thereby giving the operator greater control of the tool. Sleeves are ideal for grinding , blending, deburring, smoothing, finishing and polishing a wide variety of flat and contoured surfaces, including the inside of holes and other hard-to-reach areas. Also effective on hardware with contours or intricate shapes. It can be effectively used on metal, glass & even wooden surfaces 1000 nos
Steel shots High class metallic abrasives sae shots and grits Chemical composition:-c .8-1.2%, mn.8-1.2%, si.5%min, s.05%max, p .05%max Density:-7.4gm/cc, hardness hrc 40-50, .Quality control is ensured through process supported by well equiped laboratory & experienced professionals. Packing=25 kgs bag
1) Colour : Gryish White 2) Specific Gravity: 2.85 - 2.95 3) Glass Content: 95+3 { 85%(min)} 4) Fineness(m2/Kg) 450+20 (320) 5) Slag Activity Index a) 7 days : 70% (60%(min.) of Control OPC) b) 28 days: 90% (60%(min.) of Control OPC) 6) Soundness a) Le-Chatelier (mm) : 2.0 7) Proportion of use : 20% to 70%
White Fused Alumina
A saw is a tool consisting of a tough blade, wire, or chain with a hard toothed edge. ... It is used to cut through material, very often wood though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less forcefully back or continuously forward.
Accplast PHSW is Phosphate Bonded Non Wetting No Cement Refractory in India by Calderys refractories. This High CCS Lower Porosity Ready to Use Form has No Reaction With Sulphur, Non Wetting Characteristic, High Thermal Shock Resistance used for Reheating Furnace, Side Walls, Preheating Zone, Lower Heat Losses.
Mounted points Abrasive products made from Aluminium Oxide & Silicon Carbide by Vitrified Bond. Products are available in various sizes and shape in different grit size & colour.
Maheshwari A 99.9 aluminum oxide beads have a very high purity with an Al2O3 content of > 99.9% and with minor secondary components of < 1000 ppm. These beads are suitable for the preparation and wet grinding of high-quality aluminum oxide raw materials for e.g. special technical, electrical and optical components and high-purity coatings made from special suspensions. Very small beads down to 0.1 mm and sizes up to 60mm are available of this type. Technical Data: High purity 99.9 % Al2O3 Specific Weight 3.8 kg/dm3 Bulk Density 2.3 kg/dm3 Roundness 0.93 (ratio width/length (xmin/xmax)) Colour: White satin smooth Fields of application In the mining industry A 99.9 ceramic beads are used for the grinding of minerals and precious metals. Quality attributes The ceramic beads type A 99.9 have a dense sintered structure, a smooth surface, high roundness and high hardness.
High alumina ball means alumina ball with aluminium oxide content higher than 90%, high alumina ball is high efficiency grinding media in today industry. The high alumina ball works together with the high alumina mill linings brick will benefits you: > Less grinding time, doubled productivity. > Less wear loss of the ball and linings, more clean you final product keep. > Longer service life, less down time Physical Properties: 1) Bulk Density : 60mm > 3.65, 50mm > 3.65, 40mm > 3.65, 30mm > 3.65, 20mm > 3.63 2) Self Wearloss (24h) : < 0.04 3) Water absorption : < 0.1% 4) Hardness (M0hs) : 9 5) Service Temp : > 1600 C 6) Color : White
We manufacturer and supplier of garnet abrasive all mess size.
We can offer Garnet abrasive with mesh size 20/40 30/60 12/24 and 60/80 from India FOB hazira/mundra
Melfort Abrasives and Tools has been a leading manufacturer of velcro backing pad and supplier of various other types of abrasives and cutting tools in India. Over the years, we have grown into an enterprise offering a wide range of products across multiple categories. Some of our leading products include Diamond cutting disc, Wood cutting disc, Velcro disc and Sanding fiber disc etc.
We produce Finest Quality of Garnet Abrasive Sand. With the help of state of the art processing facilities, Spacious Warehouse and with long term supply of raw material, we are able to provide best quality of garnet in various sizes in shorter lead times across the globe at very attractive prices. We produce Abrasive Garnet Sand in Following Sizes - 10-20 Mesh; 12-24 Mesh; 20-40 Mesh; 30-60 Mesh; 80 Mesh; 120 mesh Hardness: 7.5 to 8 mohs Application: Blasting of surface for painting and coating to achieve desired profiles. Waterjet Cutting
