Find Verified Hydraulic Equipments Suppliers, Manufacturers and Wholesalers

CBT-E3series gear pumps are external pumps with axial compensation and radial balancing. They are widely applied in hydraulic system and Agricultural & Tractors and Engineering Trucks.
CBT-E3series gear pumps can be provided with various kinds of mounting flange, shaft ends, and connection styles of inlet and outlet. Please refer to the table below. This series pump can be made as CBT-E3--side-in and rear-out, rear-in and side-out. CBT-E3 pumps can also be combined as a relief pump CBT-E3***YL***with safety valve, or as a constant flow pump CBT-E3***HL***with constant flow valve.

The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.

GPC4 series high pressure gear pumps are one of imported high pressure gear pumps with introduction technology from VICKERS, U.S.A. GPC4 series high pressure gear pumps have the advantageous features of the axial flexible compensation and radial hydraulic balance. This series pumps can also be combined into multiple pumps to meet the special needs. GPC4 gear pumps can provide various kinds of mounting flanges, shaft ends and inlet & outlet oil connection with SAE and Chinese standards. They are widely used in the construction, walking machinery and other hydraulic systems.

The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.

G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain range of axial and radial force.
Gear pump G5 is an external gear pump with axial flexible compensation and radial hydraulic balance. Adopting the structure of three sections, the pump is composed of front and rear cover, middle section, gear, pressure plate, seals, etc.
G5 series high pressure gear pumps can be provided with various kinds of mounting flanges, shaft ends, and connection styles of inlet and outlet in both SAE and Chinese standards. Please refer to the table below.
G5 series high pressure are widely applied in the hydraulic system of Agricultural equipment such as Tractors. These gear pumps are also used in Engineered Trucks.

TheproductswidelyusedonAgriculturaltractors,GardenTractors,DumpTrucks,Forklifts,CombineHarvesters,Fishing,Sweepers,WaterTanks,Trailers,Crane,TruckCrane,Excavators,Loaders,EarthMovers,MachineTool,etc.

Hydraulic Orbit Motor BMP

BMP series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weigth.
Characteristic Features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or series.
* Advanced construction design, high power and low weight.

Order Code:

Code
BMP
Displacement
36
50
80
100
125
160
200
250
315
400
500
Flange
2
2-Ã?13.5 Rhomb-flange,pilot Ã?82.5Ã?8

4-Ã?13.5 Rhomb-flange,pilot Ã?82.5Ã?8
H4
4-3/8-16 Square-flange,pilot Ã?44.4Ã?2.8
H5
4-M10 Square-flange,pilot Ã?44.4Ã?2.8
Output Shaft
A
Shaft Ã?25,parallel Key 8x7x32
B
Shaft Ã?32,parallel Key 10x8x45
C
Shaft Ã?25.4,parallel Key 6.35x6.35x31.75
E
Shaft Ã?25.4,splined tooth SAE 6B
R
Short shaft Ã?25.4,parallel key 6.35x6.35x31.75
F
Shaft Ã?31.75,splined tooth 14-DP12/24
FD
Long shaft Ã?31.75,splined tooth 14-DP12/24
G
Shaft Ã?31.75,parallel Key 7.96x7.96x31.75
T
Cone-Shaft Ã?28.56,parallel Key B5x5x14
T3
Cone shaft Ã?31.75,parallel key 7.96x7.96x25.4
Port and Drain Port
D
G1/2 Manifold Mount 4xM8, G1/4
M
M22Ã?1.5 Manifold Mount 4xM8, M14Ã?1.5
S
7/8-14 O-ring manifold 4x5/16-18UNC, 7/16-20UNF
P
1/2-14 NPTF Manifold 4x5/16-18UNC,7/16-20UNF
R
PT(Rc)1/2 Manifold 4xM8, PT(Rc)1/4
Rotation Direction
Omit
Standard
R
Opposite
Paint
00
No paint
Omit
Blue
B
Black
S
Silver grey
Unusually Function
Omit
Standard
N
Big radial force
O
No case drain
F
Free Running
LS
Low Speed

Hydraulic orbit motor BMT
BMT series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications.
Characteristic Features:
*Advanced manufacturing devices for the Gerotor gear set, which use low pressure of start-up, provide smooth and reliable
operation and high efficiency.
*The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications.
*Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.


Order Code:
Code
Remarks
BMT
BMTS ?
Displacement
160
200
250
315
400
500
630
800 ?
Flange
4
4- 14 Square-flange 160,pilot 125 9
BMT
K6
4- 14.5Square-flange 162,pilot 127 9
W
4- 18 Wheel-flange 200,pilot 160 7
D
4- 14 Circle-flange 160,pilot 125 8
BMTS
E
4- 14.5 Square-flange 162, pilot 127 10
Output Shaft
M
Shaft 40,parallel key 12 8 70
BMT
G
Shaft 38.1,parallel key 9.52 9.52 57.15
F
Shaft 38.1,splined tooth 17-DP12/24
FD
Shaft 38.1,splined tooth 17-DP12/24
T
Cone-shaft 1:10 45,parallel key B12 8 28
T1
Cone-shaft 1:8 45,parallel key 11.13 11.13 31.75
SL
shaft 34.85,Splined key,Splined key 6-34.85 28.14 8.64
G1
shaft 31.75,parallel key 7.967.96 40
F1
Shaft 31.75,splined tooth 14-DP12/24
Omit
Short shaft 16-DP12/24
BMTS
Port and Drain Port
D
G3/4 Manifold Mount,4-M10 , G1/4
M
M27 2 Manifold Mount,4-M10, M14 1.5
S
1-1/16-12UN O-ring, 9/16-18UNF
S1
1-1/16-12UN O-ring, 7/16-20UNF
G
G3/4,G1/4
M3
M27 2,M14 1.5
Rotation Direction
Omit
Standard
R
Opposite
Paint
00
No paint
Omit
Blue
B
Black
S
Silver grey
Unusually Function
Omit
Standard
LL
Low Leakage
F
Free Running
LS
Low Speed

Hydraulic orbit motor BMV
BMV series motor adapt the advanced Gerotor gear set, design with disc distribution flow and high pressure. The unit can be supplied theindividual variant in operating multifunction in accordance with requirement of applications.
Characteristic Features:
*Advanced manufacturing devices for the Gerotor gear set, which use low pressure of start-up, provide smooth and reliable operationand high efficiency.
*The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and hightorque in the wide of applications.
*Advanced design in disc distrbution flow, which can automatically compensate in operating with high volume efficiency and long life,provide smooth and reliable operation.

Order Code:
Code
BMV
Displacement
315
400
500
630
800
1000
Flange
4
4- 18 Square-flange 200,pilot 160 11
W
4- 18 Wheel-flange 224,pilot 180 10
Output Shaft
A
Shaft 50 , parallel key 14 9 70
BD
Shaft 53.975, splined key 16-DP8/16
B
Shaft 53.975, splined key 16-DP8/16
C
Shaft 57.15, parallel key 12.7 12.7 57.15
T
Cone shaft 60, parallel key B16 10 32
T1
Cone shaft 60, parallel key 14.308 14.308 50.8
Port and Drain Port
D
G1 Manifold 4 M12, G1/4
M
M33 2 Manifold 4 M12, M14 1.5
S
1-5/16-12UN, 9/16-18UNFG1,
G
G1/4
M5
M33 2, M141.5
S1
1-5/16-12UN(18),7/16-20UNF(12)
Rotation Direction
Omit
Standard
R
Opposite
Paint
00
No paint
Omit
Blue
B
Black
S
Silver grey
Unusually Function
Omit
Standard
Note: When the table is used, please fill the code in the table and give us the complete order code you need. The code information consists of construction, displacement, mounting flange, output shaft and ports . For more details about Performance data, Dimensions & mounting data, Shaft extensions, etc., please download our catalogue at here.

BMM Hydraulic orbit motors

BMM series motor are small volume,economical type,which is designed with shaft distribution flow, which adapt
the Gerotor gear set design and provide compact volume,high power and low weigth.
Characteristic features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
* Advanced construction design, high power and low weight.

Main specification
type
BMM8
BMM12
BMM20
BMM32
BMM40
BMM50
displacement
8.2
12.9
19.9
31.6
39.8
50.3
Max speed(rpm)
rated
1537
1256
814
513
452
358
Cont.
1950
1550
1000
630
500
400
int.
2450
1940
1250
800
630
500
Max Torque
(N*M)
rated
8
13
19
31
37
33
Cont.
11
16
25
40
45
46
int.
15
23
35
57
70
88
peak
21
33
51
64
82
100
Max speed
(kw)
rated
1.3
1.7
1.7
1.7
1.7
1.2
Cont.
1.8
2.4
2.4
2.4
2.2
1.8
int.
2.6
3.2
3.2
3.2
3.2
3.2
Max pressure
drop(MPa)
rated
9
9
9
9
8.5
6
Cont.
10
10
10
10
9
7
int.
14
14
14
14
14
14
peak
20
20
20
16
16
16
Max flow(L/min)
rated
14
18
18
18
20
20
Cont.
18
20
20
20
20
20
int.
20
25
25
25
25
25
Weight(kg)
1.9
2
2.1
2.2
2.3
2.4
Type Max.inlet pressure
BMM8-50 Cont. 17.5
(Mpa) Int. 22.5

* Continuous pressure :Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute.
Basic Info.
Attribute Attribute value
Model NO BMM
Power Hydraulic
Export Markets Global
Structure Hydraulic motor,orbital hydraulic motor
Material Cast iron
OEM Accept

Substitute Reference substance
MOTOR CROSS REFERENCE TABLE
HANJIU
HYDRAULIC M+S
HYDRAULIC EATON
CHAR LYNN DANFOSS ROSS
TRW WHITE
CROSS PARKER SAM
BREVINI BOSCH
RECROTH
BMM MM MLHK J SERIES OMM BGM MGX
BMP/BM1 MP HP H SERIES OMP DH MF MG WP RS TC TE TB BG MGP GXP
BMR/BM2 MR HR MLHRW,RW S,T SERIES W SERIES OMR DS OMEW MBWR RE TF BR MGR GMR
BMH/BM4 MH MLHH HW HWF OMH ME RE TG
BMS/BM5 MS MSY MLHS 2000 SERIES OMS ME RE TG HPR MGS GMS
BMT/BM6 MT MLHT MTM 6000 SERIES OMT TMT MJ HT MGT,GMT
BMV MV MLHV 10000 SERIES OMV MGV GMV
Hydraulic orbit motor applications:
Brush cutters
Mower
Haveresting equipment
Forestry equipment
Turf equipment

Product Description
060 integral series power steering units
060 series PSU incorporated the inlet check valve, safety valve, internal check valve, cylinder port shock valve and anti-cavitation valve. The design is more compact and convenient.

Features
Incorporated five valves into the PSU, So it is more compact and convenient
Low hydraulic noise
Special casting design for low pressure drop.
3 basic systems-open center, closed center and load sensing
Displacement: 50~500 ml/r

Main specification data
Max. System pressure --------16MPa
Max. Back pressure -----------2.1MPa
Input torque--------------------1.7~2.5Nm
Max. System operating temperature--------93º C
Recommended oil filtration--------ISO 19/16

Function of the incorporated valve
Inlet safety valve: Limits maximum pressure drop across the PSU to protect the steering circuit.
Cylinder port shock valve: Protects hoses against pressure surge created by ground forces on the cylinder axle.
Anti- cavitation valve: Protects steering circuit against vacuum (cavitation) conditions.
Inlet check valve: Prevents oil from returning through the PSU when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick.
Internal check valve: Converts the PSU to a hand operated pump for limited manual steering.

displacement (ml/r)506380100125160200250315400500
L(mm)137.5139.5139.5142150150155161171181193

Hydraulic steering unit is widely used in the steering control system
such as the steering system of many kinds of industrial and agricultural
mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.
We produce the products match with the OEM number of all machines.




Hydraulic steering unit applications:
Construction Machinery
Agriculture Machinery
Heavy-Duty Equipment
Forestry Machinery
Mining Equipment

Hydraulic Steering Unit :

Hydraulic steering control units (BZZ),hydraulic motor

BZZ1, BZZ2, BZZ3 Hydraulic steering control units(SCU), new design, better performance. Widely applied to low speed and heavy load vehicles E.g. construction machinary, forklift, tractor, harvester and helm control etc.


The advantages of the hydraulic steering control units:


1.Low cost, reliable.
2.No load reaction on the steering wheel comfortable.
3.Manual operation available when the pump doesnt work.
4.Low control torque, continuous operation.
5.According to the system, different function and pressure level valves available.

102S hydraulic steering units


1.Hydraulic steering unit is widely used in the steering control system
such as the steering system of many kinds of industrial and agricultural
mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.

2.We produce the products match with the OEM number of all machines.


Specification data:

ParametersHKUS 40/3,4,8HKUS 50/3,4,8HKUS 63/3,4,8HKUS 80/3,4,8HKUS 100/3,4,8HKUS 125/3,4,8HKUS 40/160,4,8HKUS 200/3,4,8HKUS 250/3,4,8HKUS 320/3,4,8HKUS 400/3,4,8HKUS 500/3,4,8
Displacement,cm3/rev39,649,565,679,299123,8158,4198247,5316,8396495
in3/rev2.42344.836.047.569.6712.115.119.324.230.2
Rated Pressure,bar140140170170170170170170170170170170
PSI203024652465246524652465246524652465246524652465

Hydraulic steering unit applications:
Construction Machinery
Agriculture Machinery
Heavy-Duty Equipment
Forestry Machinery
Mining Equipment

209X  Base Plate 2 Post Hydraulic Car Lift

PEAK's Series of 2 Post Lift for Chain-Drived
Model Lifting Capacity
208C 3.5T (8,000 lbs)
208 3.5T (8,000 lbs)
209 4.0T (9,000 lbs)
209X 4.0T (9,000 lbs)
* "C" is Clearfloor style. 
* 209X is stronger, wider and higher than 209 in construction. 

Feature 
?¢ 9,000 Lbs Capacity
?¢ Dual hydraulic cylinders, designed and made on ANSI standard, high quality NOK seals.
?¢ 3/8" aircraft quality cable is used for synchronization.
?¢ Supersymmetric arms design with three-stages front arms and two-stages rear arms.
?¢ Self-lubricating UHMW Polyethylene sliders and bronze bush.
?¢ Single-point safety release, and dual safety design.
?¢ Stackable rubber pad with 1.5", 2.5" and 5" extension adaptors.
 ?¢Automatic arms restraints.
?¢ Hydraulic power unit.
?¢Long warranty period: 
5 Years warranty on lift structure(including Columns, Carriage, Lifting Arms, Top Beam, Floor Cover, Platform, Cross Beam, Car Drive-in Ramp, Scissor, Baseframe etc.); 
2 Years warranty on the hydraulic parts (including cylinders, oil seal, oil hose, fitting etc.); 
1 Year warranty on the spare parts, electrical components, power unit (not including consumption parts such as rubber pad).

CBT-E3series gear pumps are external pumps with axial compensation and radial balancing. They are widely applied in hydraulic system and Agricultural & Tractors and Engineering Trucks.
CBT-E3series gear pumps can be provided with various kinds of mounting flange, shaft ends, and connection styles of inlet and outlet. Please refer to the table below. This series pump can be made as CBT-E3--side-in and rear-out, rear-in and side-out. CBT-E3 pumps can also be combined as a relief pump CBT-E3YLwith safety valve, or as a constant flow pump CBT-E3HLwith constant flow valve.

The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.

G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain range of axial and radial force.
Gear pump G5 is an external gear pump with axial flexible compensation and radial hydraulic balance. Adopting the structure of three sections, the pump is composed of front and rear cover, middle section, gear, pressure plate, seals, etc.
G5 series high pressure gear pumps can be provided with various kinds of mounting flanges, shaft ends, and connection styles of inlet and outlet in both SAE and Chinese standards. Please refer to the table below.
G5 series high pressure are widely applied in the hydraulic system of Agricultural equipment such as Tractors. These gear pumps are also used in Engineered Trucks.

The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.

GPC4 series high pressure gear pumps are one of imported high pressure gear pumps with introduction technology from VICKERS, U.S.A. GPC4 series high pressure gear pumps have the advantageous features of the axial flexible compensation and radial hydraulic balance. This series pumps can also be combined into multiple pumps to meet the special needs. GPC4 gear pumps can provide various kinds of mounting flanges, shaft ends and inlet & outlet oil connection with SAE and Chinese standards. They are widely used in the construction, walking machinery and other hydraulic systems.

The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.

Hydraulic Orbit Motor BMR

BMR series motor adapt the advanced Gerolor gear set design with shaft distribution flow, which can automatically compensate in operating with high pressure , provide reliable and smooth operation, high efficiency and long life.
Characteristic Features:
*Advanced manufacturing devices for the Gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency.
*Shaft seal can bear high pressure of back and the motor can be used in parallel or in series.
*Special design in the driver-linker and prolong operating life
*Special design for distribution system can meet the requirement of low noise of unit.
*Compact volume and easy installation.

Order Code:
Code
BMR
Displacement
36
50
80
100
125
160
200
250
315
375
Flange
2
2-Ã?13.5 Rhomb-flange,pilot Ã?82.5Ã?8
4
4-Ã?13.5 Rhomb-flange,pilot Ã?82.5Ã?8
H4
4-3/8-16 Square-flange,pilot Ã?44.4Ã?2.8
H5
4-M10 Square-flange,pilot Ã?44.4Ã?2.8
Output Shaft
A
Shaft Ã?25,parallel Key 8x7x32
B
Shaft Ã?32,parallel Key 10x8x45
C
Shaft Ã?25.4,parallel Key 6.35x6.35x31.75
E
Shaft Ã?25.4,splined tooth SAE 6B
R
Short shaft Ã?25.4,parallel key 6.35x6.35x31.75
F
Shaft Ã?31.75,splined tooth 14-DP12/24
FD
Long shaft Ã?31.75,splined tooth 14-DP12/24
G
Shaft Ã?31.75,parallel Key 7.96x7.96x31.75
T
Cone-Shaft Ã?28.56,parallel Key B5x5x14
Port and Drain Port
D
G1/2 Manifold Mount 4-M8, G1/4
M
M22Ã?1.5 Manifold Mount 4-M8, M14Ã?1.5
S
7/8-14 O-ring manifold 4-5/16-18UNC, 7/16-20UNF
P
1/2-14 NPTF Manifold 4-5/16-18UNC,7/16-20UNF
R
PT(Rc)1/2 Manifold 4-M8, PT(Rc)1/4
Rotation Direction
Omit
Standard
R
Opposite
Paint
00
No paint
Omit
Blue
B
Black
S
Silver grey
Unusually Function
Omit
Standard
N
Big radial force
O
No case drain
F
Free Running
LS
Low Speed

BMM series motor are small volume,economical type,which is designed with shaft distribution flow, which adapt
the Gerotor gear set design and provide compact volume,high power and low weigth.
Characteristic features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
* Advanced construction design, high power and low weight.
Main specification
type
BMM8
BMM12
BMM20
BMM32
BMM40
BMM50
displacement
8.2
12.9
19.9
31.6
39.8
50.3
Max speed(rpm)
rated
1537
1256
814
513
452
358
Cont.
1950
1550
1000
630
500
400
int.
2450
1940
1250
800
630
500
Max Torque
(N*M)
rated
8
13
19
31
37
33
Cont.
11
16
25
40
45
46
int.
15
23
35
57
70
88
peak
21
33
51
64
82
100
Max speed
(kw)
rated
1.3
1.7
1.7
1.7
1.7
1.2
Cont.
1.8
2.4
2.4
2.4
2.2
1.8
int.
2.6
3.2
3.2
3.2
3.2
3.2
Max pressure
drop(MPa)
rated
9
9
9
9
8.5
6
Cont.
10
10
10
10
9
7
int.
14
14
14
14
14
14
peak
20
20
20
16
16
16
Max flow(L/min)
rated
14
18
18
18
20
20
Cont.
18
20
20
20
20
20
int.
20
25
25
25
25
25
Weight(kg)
1.9
2
2.1
2.2
2.3
2.4

Type
Max.inlet pressure
BMM8-50
Cont.
17.5
(Mpa)
Int.
22.5
* Continuous pressure:Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute.

BMM series motor are small volume,economical type,which is designed with shaft distribution flow, which adapt
the Gerotor gear set design and provide compact volume,high power and low weigth.
Characteristic features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
* Advanced construction design, high power and low weight.
Main specification
type
BMM8
BMM12
BMM20
BMM32
BMM40
BMM50
displacement
8.2
12.9
19.9
31.6
39.8
50.3
Max speed(rpm)
rated
1537
1256
814
513
452
358
Cont.
1950
1550
1000
630
500
400
int.
2450
1940
1250
800
630
500
Max Torque
(N*M)
rated
8
13
19
31
37
33
Cont.
11
16
25
40
45
46
int.
15
23
35
57
70
88
peak
21
33
51
64
82
100
Max speed
(kw)
rated
1.3
1.7
1.7
1.7
1.7
1.2
Cont.
1.8
2.4
2.4
2.4
2.2
1.8
int.
2.6
3.2
3.2
3.2
3.2
3.2
Max pressure
drop(MPa)
rated
9
9
9
9
8.5
6
Cont.
10
10
10
10
9
7
int.
14
14
14
14
14
14
peak
20
20
20
16
16
16
Max flow(L/min)
rated
14
18
18
18
20
20
Cont.
18
20
20
20
20
20
int.
20
25
25
25
25
25
Weight(kg)
1.9
2
2.1
2.2
2.3
2.4

Type
Max.inlet pressure
BMM8-50
Cont.
17.5
(Mpa)
Int.
22.5
* Continuous pressure:Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute.

Substitute reference substance
Motor cross reference table

Hanjiu
Hydraulic
M+s
Hydraulic
Eaton
Char lynn
Danfoss
Ross
Trw
White
Cross
Parker
Sam
Brevini
Bosch
Recroth

Bmm
Mm mlhk
J series
Omm

Bgm
Mgx

Bmp/bm1
Mp hp
H series
Omp dh
Mf mg
Wp rs
Tc te tb
Bg
Mgp gxp

Bmr/bm2
Mr hr mlhrw, rw
S, t series w series
Omr ds omew
Mb
Wr re
Tf
Br
Mgr gmr

Bmh/bm4
Mh mlhh hw hwf

Omh
Me
Re
Tg

Bms/bm5
Ms msy mlhs
2000 series
Oms
Me
Re
Tg
Hpr
Mgs gms

Bmt/bm6
Mt mlht mtm
6000 series
Omt tmt
Mj

Ht
Mgt, gmt

Bmv
Mv mlhv
10000 series
Omv

Mgv gmv

Hydraulic orbit motor applications:
Brush cutters
Mower
Haveresting equipment
Forestry equipment
Turf equipment

We offer Hydraulic motors for the company of Hydraulic & Pneumatic

Hydraulic orbit motor BMS
BMS series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications.
Characteristic Features:
*Advanced manufacturing devices for the Gerotor gear set which use low pressure of start-up, provide smooth and reliable operation and high efficiency.
*The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications.
*Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.


Order Code:
Code
Remarks
BMS
BMSSã??
Displacement
80
100
125
160
200
250
315
375
Flange
E2
2-13.5 Rhomb-flange 106.4,pilot 82.56.3
BMS
E4
4-13.5 Rhomb-flange 106.4,pilot 82.56.3
F6
6-13.5 Rhomb-flange 106.4,pilot 82.52.6
W
4-13.5 Wheel-flange 160,pilot 1258
E2B
2-14.3 Rhomb-flange 146.05,pilot 101.69.4
SP
4-11.5 Square-flange 106.4,pilot 82.56.3
D
4-11 Circle-flange 125,pilot 1006
BMSS
E
4-13.5 Square-flange 127,pilot 101.66.3
Output Shaft
A
Shaft 25 , parallel key 8732
BMS
B
Shaft 32 , parallel key 10845
D
Shaft 25.4 , parallel key6.356.3525.4
G
Shaft 31.75,parallel key 7.967.9631.75
F
Shaft 31.75,splined tooth 14-DP12/24
FD
Long Shaft 31.75,splined tooth 14-DP12/24
SL
shaft 34.85,Splined key 6-34.8528.148.64
T1
Cone-shaft 35 ,parallel key B6620
T3
Cone-shaft31.75,parallel key 7.967.9631.75
S1
Shaft 25.4 ,splined tooth SAE 6B
I
Sub-shaft 22,splined tooth 13-DP16/32
Omit
Short shaft 12-DP12/24
BMSS
Port and Drain Port
D
G1/2 Manifold Mount 2-M10 , G1/4
M
M221.5 Manifold Mount 2-M10, M141.5
S
7/8-14UNF O-ring manifold 2-3/8-16, 7/16-20UNF
P
1/2-14NPTF manifold 2-3/8-16UNC, 7/16-20UNF
Rotation Direction
Omit
Standard
R
Opposite
Paint
00
No paint

Bmm series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt
The gerotor gear set design and provide compact volume, high power and low weigth.
Characteristic features:
Advanced manufacturing devices for the gerotor gear set, which provide small volume, high efficiency and long life.
Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
Advanced construction design, high power and low weight.

Continuous pressure:max. Value of operating motor continuously.
Intermittent pressure :max. Value of operating motor in 6 seconds per minute.
Peak pressure:max. Value of operating motor in 0.6 second per minute.
Basic info.
Attribute
Attribute value
Model no
Bmm
Power
Hydraulic
Export markets
Global
Structure
Hydraulic motor, orbital hydraulic motor
Material
Cast iron
Oem
Accept