G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain range of axial and radial force.
Gear pump g5 is an external gear pump with axial flexible compensation and radial hydraulic balance. Adopting the structure of three sections, the pump is composed of front and rear cover, middle section, gear, pressure plate, seals, etc.
G5 series high pressure gear pumps can be provided with various kinds of mounting flanges, shaft ends, and connection styles of inlet and outlet in both sae and chinese standards. Please refer to the table below.
G5 series high pressure are widely applied in the hydraulic system of agricultural equipment such as tractors. These gear pumps are also used in engineered trucks.
The products widely used on agricultural tractors, garden tractors, dump trucks, forklifts, combine harvesters, fishing, sweepers, water tanks, trailers, crane, truck crane, excavators, loaders, earth movers, machine tool, etc.
CBT-E3series gear pumps are external pumps with axial compensation and radial balancing. They are widely applied in hydraulic system and Agricultural & Tractors and Engineering Trucks.
CBT-E3series gear pumps can be provided with various kinds of mounting flange, shaft ends, and connection styles of inlet and outlet. Please refer to the table below. This series pump can be made as CBT-E3--side-in and rear-out, rear-in and side-out. CBT-E3 pumps can also be combined as a relief pump CBT-E3YLwith safety valve, or as a constant flow pump CBT-E3HLwith constant flow valve.
The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
1.Hydraulic steering unit is widely used in the steering control system
such as the steering system of many kinds of industrial and agricultural
mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.
2.We produce the products match with the OEM number of all machines.
The TP1-**/13BSS-40-L series gear pumps have the advantages of it's compact structure, high strength body and its axial clearance automatic compensation. This series pumps are mainly installed with the engine's power take-off, and they are widely used in the agricultural and construction machinery.
Product Description
060 integral series power steering units
060 series PSU incorporated the inlet check valve, safety valve, internal check valve, cylinder port shock valve and anti-cavitation valve. The design is more compact and convenient.
Features
Incorporated five valves into the PSU, So it is more compact and convenient
Low hydraulic noise
Special casting design for low pressure drop.
3 basic systems-open center, closed center and load sensing
Displacement: 50~500 ml/r
Main specification data
Max. System pressure --------16MPa
Max. Back pressure -----------2.1MPa
Input torque--------------------1.7~2.5Nm
Max. System operating temperature--------93º C
Recommended oil filtration--------ISO 19/16
Function of the incorporated valve
Inlet safety valve: Limits maximum pressure drop across the PSU to protect the steering circuit.
Cylinder port shock valve: Protects hoses against pressure surge created by ground forces on the cylinder axle.
Anti- cavitation valve: Protects steering circuit against vacuum (cavitation) conditions.
Inlet check valve: Prevents oil from returning through the PSU when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick.
Internal check valve: Converts the PSU to a hand operated pump for limited manual steering.
Hydraulic steering unit is widely used in the steering control system
such as the steering system of many kinds of industrial and agricultural
mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.
We produce the products match with the OEM number of all machines.
Hydraulic steering unit applications:
Construction Machinery
Agriculture Machinery
Heavy-Duty Equipment
Forestry Machinery
Mining Equipment
3512 Hydraulic Equipments Suppliers
Short on time? Let Hydraulic Equipments sellers contact you.
BMP series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weigth.
Characteristic Features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or series.
* Advanced construction design, high power and low weight.
4-13.5 Rhomb-flange,pilot 82.58
H4
4-3/8-16 Square-flange,pilot 44.42.8
H5
4-M10 Square-flange,pilot 44.42.8
Output Shaft
A
Shaft 25,parallel Key 8x7x32
B
Shaft 32,parallel Key 10x8x45
C
Shaft 25.4,parallel Key 6.35x6.35x31.75
E
Shaft 25.4,splined tooth SAE 6B
R
Short shaft 25.4,parallel key 6.35x6.35x31.75
F
Shaft 31.75,splined tooth 14-DP12/24
FD
Long shaft 31.75,splined tooth 14-DP12/24
G
Shaft 31.75,parallel Key 7.96x7.96x31.75
T
Cone-Shaft 28.56,parallel Key B5x5x14
T3
Cone shaft 31.75,parallel key 7.96x7.96x25.4
Port and Drain Port
D
G1/2 Manifold Mount 4xM8, G1/4
M
M221.5 Manifold Mount 4xM8, M141.5
S
7/8-14 O-ring manifold 4x5/16-18UNC, 7/16-20UNF
P
1/2-14 NPTF Manifold 4x5/16-18UNC,7/16-20UNF
R
PT(Rc)1/2 Manifold 4xM8, PT(Rc)1/4
Rotation Direction
Omit
Standard
R
Opposite
Paint
00
No paint
Omit
Blue
B
Black
S
Silver grey
Unusually Function
Omit
Standard
N
Big radial force
O
No case drain
F
Free Running
LS
Low Speed
This is Hanjiu Hydraulic from Shijiazhuang Hanjiu Technology Co.,Ltd,we mainly produce Hydraulic orbitrol steering. Our orbitrol steering can widely used for kinds of Agricultural equipments like:Agricultural harvesters,tractors for John Deere,New Holland,Case,Class,JCB etc. Our Hydraulic steering unit can replace Danfoss,Eaton,M+S,Parker,White series 1. Our Hydraulic orbitrol steering can replace Danfoss,Eaton,M+S,Parker,White seriesGood day for you. Displacement: 80/100/125/160/200/400/500/630/800/1000 cc
Product Description
060 integral series power steering units
060 series PSU incorporated the inlet check valve, safety valve, internal check valve, cylinder port shock valve and anti-cavitation valve. The design is more compact and convenient.
Features
Incorporated five valves into the PSU, So it is more compact and convenient
Low hydraulic noise
Special casting design for low pressure drop.
3 basic systems-open center, closed center and load sensing
Displacement: 50~500 ml/r
Main specification data
Max. System pressure 16MPa
Max. Back pressure2.1MPa
Input torque1.7~2.5Nm
Max. System operating temperature--93 C
Recommended oil filtrationISO 19/16
Function of the incorporated valve
Inlet safety valve: Limits maximum pressure drop across the PSU to protect the steering circuit.
Cylinder port shock valve: Protects hoses against pressure surge created by ground forces on the cylinder axle.
Anti- cavitation valve: Protects steering circuit against vacuum (cavitation) conditions.
Inlet check valve: Prevents oil from returning through the PSU when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick.
Internal check valve: Converts the PSU to a hand operated pump for limited manual steering.
Hydraulic steering unit is widely used in the steering control system
such as the steering system of many kinds of industrial and agricultural
mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.
We produce the products match with the OEM number of all machines.
Hydraulic steering unit applications:
Construction Machinery
Agriculture Machinery
Heavy-Duty Equipment
Forestry Machinery
Mining Equipment
1.Hydraulic steering unit is widely used in the steering control system
such as the steering system of many kinds of industrial and agricultural
mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.
2.We produce the products match with the OEM number of all machines.
The features of this CBG-F3 series gear pumps are its drive helical gear and its shaft cover installed with double row angle contact bearing. This design can bear the radial and axial force caused by the working helical gear, to guarantee the working performance and service time of the gear pumps.
This series pumps are mainly installed with the taking force port of the engine. And they are widely used in the agricultural machinery, for example: Wheat harvester, Corn harvester, etc.
TheproductswidelyusedonAgriculturaltractors,GardenTractors,DumpTrucks,Forklifts,CombineHarvesters,Fishing,Sweepers,WaterTanks,Trailers,Crane,TruckCrane,Excavators,Loaders,EarthMovers,MachineTool,etc.
Gpc4 series high pressure gear pumps are one of imported high pressure gear pumps with introduction technology from vickers, u.S.A. Gpc4 series high pressure gear pumps have the advantageous features of the axial flexible compensation and radial hydraulic balance. This series pumps can also be combined into multiple pumps to meet the special needs. Gpc4 gear pumps can provide various kinds of mounting flanges, shaft ends and inlet & outlet oil connection with sae and chinese standards. They are widely used in the construction, walking machinery and other hydraulic systems.
The products widely used on agricultural tractors, garden tractors, dump trucks, forklifts, combine harvesters, fishing, sweepers, water tanks, trailers, crane, truck crane, excavators, loaders, earth movers, machine tool, etc.
G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain range of axial and radial force.
Gear pump G5 is an external gear pump with axial flexible compensation and radial hydraulic balance. Adopting the structure of three sections, the pump is composed of front and rear cover, middle section, gear, pressure plate, seals, etc.
G5 series high pressure gear pumps can be provided with various kinds of mounting flanges, shaft ends, and connection styles of inlet and outlet in both SAE and Chinese standards. Please refer to the table below.
G5 series high pressure are widely applied in the hydraulic system of Agricultural equipment such as Tractors. These gear pumps are also used in Engineered Trucks.
BMM series motor are small volume,economical type,which is designed with shaft distribution flow, which adapt
the Gerotor gear set design and provide compact volume,high power and low weigth.
Characteristic features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
* Advanced construction design, high power and low weight.
Main specification
type
BMM8
BMM12
BMM20
BMM32
BMM40
BMM50
displacement
8.2
12.9
19.9
31.6
39.8
50.3
Max speed(rpm)
rated
1537
1256
814
513
452
358
Cont.
1950
1550
1000
630
500
400
int.
2450
1940
1250
800
630
500
Max Torque
(N*M)
rated
8
13
19
31
37
33
Cont.
11
16
25
40
45
46
int.
15
23
35
57
70
88
peak
21
33
51
64
82
100
Max speed
(kw)
rated
1.3
1.7
1.7
1.7
1.7
1.2
Cont.
1.8
2.4
2.4
2.4
2.2
1.8
int.
2.6
3.2
3.2
3.2
3.2
3.2
Max pressure
drop(MPa)
rated
9
9
9
9
8.5
6
Cont.
10
10
10
10
9
7
int.
14
14
14
14
14
14
peak
20
20
20
16
16
16
Max flow(L/min)
rated
14
18
18
18
20
20
Cont.
18
20
20
20
20
20
int.
20
25
25
25
25
25
Weight(kg)
1.9
2
2.1
2.2
2.3
2.4
Type
Max.inlet pressure
BMM8-50
Cont.
17.5
(Mpa)
Int.
22.5
* Continuous pressure:Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute.
The TP1-**/13BSS-40-L series gear pumps have the advantages of it's compact structure, high strength body and its axial clearance automatic compensation. This series pumps are mainly installed with the engine's power take-off, and they are widely used in the agricultural and construction machinery.
BMP series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weigth.
Characteristic Features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or series.
* Advanced construction design, high power and low weight.
Substitute Reference substance
MOTOR CROSS REFERENCE TABLE
HANJIU
HYDRAULIC
M+S
HYDRAULIC
EATON
CHAR LYNN
DANFOSS
ROSS
TRW
WHITE
CROSS
PARKER
SAM
BREVINI
BOSCH
RECROTH
BMM
MM MLHK
J SERIES
OMM
BGM
MGX
BMP/BM1
MP HP
H SERIES
OMP DH
MF MG
WP RS
TC TE TB
BG
MGP GXP
BMR/BM2
MR HR MLHRW,RW
S,T SERIES W SERIES
OMR DS OMEW
MB
WR RE
TF
BR
MGR GMR
BMH/BM4
MH MLHH HW HWF
OMH
ME
RE
TG
BMS/BM5
MS MSY MLHS
2000 SERIES
OMS
ME
RE
TG
HPR
MGS GMS
BMT/BM6
MT MLHT MTM
6000 SERIES
OMT TMT
MJ
The TP1-**/13BSS-40-L series gear pumps have the advantages of it's compact structure, high strength body and its axial clearance automatic compensation. This series pumps are mainly installed with the engine's power take-off, and they are widely used in the agricultural and construction machinery.
Cbt-e3******series gear pumps are external pumps with axial compensation and radial balancing. They are widely applied in hydraulic system and agricultural & tractors and engineering trucks.
Cbt-e3******series gear pumps can be provided with various kinds of mounting flange, shaft ends, and connection styles of inlet and outlet. Please refer to the table below. This series pump can be made as cbt-e3-side-in and rear-out, rear-in and side-out. Cbt-e3 pumps can also be combined as a relief pump cbt-e3***yl***with safety valve, or as a constant flow pump cbt-e3***hl***with constant flow valve.
The products widely used on agricultural tractors, garden tractors, dump trucks, forklifts, combine harvesters, fishing, sweepers, water tanks, trailers, crane, truck crane, excavators, loaders, earth movers, machine tool, etc.
The features of this cbg-f3 series gear pumps are its drive helical gear and its shaft cover installed with double row angle contact bearing. This design can bear the radial and axial force caused by the working helical gear, to guarantee the working performance and service time of the gear pumps.
This series pumps are mainly installed with the taking force port of the engine. And they are widely used in the agricultural machinery, for example: wheat harvester, corn harvester, etc.
The features of this cbg-f3 series gear pumps are its drive helical gear and its shaft cover installed with double row angle contact bearing. This design can bear the radial and axial force caused by the working helical gear, to guarantee the working performance and service time of the gear pumps.
This series pumps are mainly installed with the taking force port of the engine. And they are widely used in the agricultural machinery, for example: wheat harvester, corn harvester, etc.
GPC4 series high pressure gear pumps are one of imported high pressure gear pumps with introduction technology from VICKERS, U.S.A. GPC4 series high pressure gear pumps have the advantageous features of the axial flexible compensation and radial hydraulic balance. This series pumps can also be combined into multiple pumps to meet the special needs. GPC4 gear pumps can provide various kinds of mounting flanges, shaft ends and inlet & outlet oil connection with SAE and Chinese standards. They are widely used in the construction, walking machinery and other hydraulic systems.
TheproductswidelyusedonAgriculturaltractors,GardenTractors,DumpTrucks,Forklifts,CombineHarvesters,Fishing,Sweepers,WaterTanks,Trailers,Crane,TruckCrane,Excavators,Loaders,EarthMovers,MachineTool,etc.
G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain range of axial and radial force.
Gear pump G5 is an external gear pump with axial flexible compensation and radial hydraulic balance. Adopting the structure of three sections, the pump is composed of front and rear cover, middle section, gear, pressure plate, seals, etc.
G5 series high pressure gear pumps can be provided with various kinds of mounting flanges, shaft ends, and connection styles of inlet and outlet in both SAE and Chinese standards. Please refer to the table below.
G5 series high pressure are widely applied in the hydraulic system of Agricultural equipment such as Tractors. These gear pumps are also used in Engineered Trucks.
The products widely used on Agricultural tractors, Garden Tractors, Dump Trucks, Forklifts, Combine Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
We can offer orbitrol for kinds of famous brand harvester
Product description
060 integral series power steering units
060 series psu incorporated the inlet check valve, safety valve, internal check valve, cylinder port shock valve and anti-cavitation valve. The design is more compact and convenient.
Features
Incorporated five valves into the psu, so it is more compact and convenient
Low hydraulic noise
Special casting design for low pressure drop.
3 basic systems-open center, closed center and load sensing
Displacement: 50~500 ml/r
Main specification data
Max. System pressure --------16mpa
Max. Back pressure -----------2.1mpa
Input torque--------------------1.7~2.5nm
Max. System operating temperature--------93⺠c
Recommended oil filtration--------iso 19/16
Function of the incorporated valve
Inlet safety valve: limits maximum pressure drop across the psu to protect the steering circuit.
Cylinder port shock valve: protects hoses against pressure surge created by ground forces on the cylinder axle.
Anti- cavitation valve: protects steering circuit against vacuum (cavitation) conditions.
Inlet check valve: prevents oil from returning through the psu when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick.
Internal check valve: converts the psu to a hand operated pump for limited manual steering.
3512 Hydraulic Equipments Suppliers
Short on time? Let Hydraulic Equipments sellers contact you.
