R10 High Pressure Wire Spiral Oil Resistant Hydraulic Rubber Hose Executive Standard:SAE 100R10 Construction: Tube:Oil synthetic rubber . Reinforcement:Four spiral plies of heavy steel wire wrapped in alternating directions. Cover: An oil and weather resistent synthetic rubber. Temperature range: -40 Centigrade to +100 Centigrade.
Product Description 060 integral series power steering units 060 series PSU incorporated the inlet check valve, safety valve, internal check valve, cylinder port shock valve and anti-cavitation valve. The design is more compact and convenient. Features Incorporated five valves into the PSU, So it is more compact and convenient Low hydraulic noise Special casting design for low pressure drop. 3 basic systems-open center, closed center and load sensing Displacement: 50~500 ml/r Main specification data Max. System pressure --------16MPa Max. Back pressure -----------2.1MPa Input torque--------------------1.7~2.5Nm Max. System operating temperature--------93º C Recommended oil filtration--------ISO 19/16 Function of the incorporated valve Inlet safety valve: Limits maximum pressure drop across the PSU to protect the steering circuit. Cylinder port shock valve: Protects hoses against pressure surge created by ground forces on the cylinder axle. Anti- cavitation valve: Protects steering circuit against vacuum (cavitation) conditions. Inlet check valve: Prevents oil from returning through the PSU when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick. Internal check valve: Converts the PSU to a hand operated pump for limited manual steering. displacement (ml/r)506380100125160200250315400500 L(mm)137.5139.5139.5142150150155161171181193 Hydraulic steering unit is widely used in the steering control system such as the steering system of many kinds of industrial and agricultural mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc. We produce the products match with the OEM number of all machines.
R1 Flexible Steel Wire Braided Hydraulic Rubber Hose Executive Standard:SAE 100 R1/DIN EN 853 Construction: Inner Tube:Oil resistant Nitrile rubber(BTR). Reinforcement:One high tensile steel wire layers(1w). Cover:Oil-resistant, abrasion-resistant, black Neoprene (CR) cover. Temperature:-40° to +212° Fahrenheit. Application: Recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Tough, long-lasting cover is suitable for many mobile hydraulic applications.
BMM Hydraulic orbit motors BMM series motor are small volume,economical type,which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume,high power and low weigth. Characteristic features: * Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life. * Shaft seal can bear high pressure of motor of which can be used in parallel or in series. * Advanced construction design, high power and low weight. Substitute Reference substance MOTOR CROSS REFERENCE TABLE HANJIU HYDRAULIC,M+S HYDRAULIC,EATON CHAR LYNN,DANFOSS,ROSS TRW,WHITE CROSS,PARKER,SAM BREVINI,BOSCH RECROTH BMM,MM MLHK,J SERIES,OMM,BGM,MGX BMP/BM1,MP HP,H SERIES,OMP DH,MF MG,WP RS,TC TE TB,BG,MGP GXP BMR/BM2,MR HR MLHRW,RW,S,T SERIES W SERIES,OMR DS OMEW,MB,WR RE,TF,BR,MGR GMR BMH/BM4,MH MLHH HW HWF,OMH,ME,RE,TG, BMS/BM5,MS MSY MLHS,2000 SERIES,OMS,ME,RE,TG,HPR,MGS GMS BMT/BM6,MT MLHT MTM,6000 SERIES,OMT TMT,MJ,HT,MGT,GMT BMV,MV MLHV,10000 SERIES,OMV,MGV GMV
Hydraulic orbit motor BMT BMT series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications. Characteristic Features: *Advanced manufacturing devices for the Gerotor gear set, which use low pressure of start-up, provide smooth and reliable operation and high efficiency. *The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications. *Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.
G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain range of axial and radial force. Gear pump G5 is an external gear pump with axial flexible compensation and radial hydraulic balance. Adopting the structure of three sections, the pump is composed of front and rear cover, middle section, gear, pressure plate, seals, etc. G5 series high pressure gear pumps can be provided with various kinds of mounting flanges, shaft ends, and connection styles of inlet and outlet in both SAE and Chinese standards. Please refer to the table below. G5 series high pressure are widely applied in the hydraulic system of Agricultural equipment such as Tractors. These gear pumps are also used in Engineered Trucks.
Hydraulic orbit motor BMS BMS series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications. Characteristic Features: *Advanced manufacturing devices for the Gerotor gear set which use low pressure of start-up, provide smooth and reliable operation and high efficiency. *The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications. *Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.
Hydraulic Orbit Motor BMR BMR series motor adapt the advanced Gerolor gear set design with shaft distribution flow, which can automatically compensate in operating with high pressure , provide reliable and smooth operation, high efficiency and long life. Characteristic Features: *Advanced manufacturing devices for the Gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency. *Shaft seal can bear high pressure of back and the motor can be used in parallel or in series. *Special design in the driver-linker and prolong operating life *Special design for distribution system can meet the requirement of low noise of unit. *Compact volume and easy installation.
Construction: Inner Tube: NBR, Black, Smooth. Reinforcement:Fine wire reinforced, Electrically conductive. Cover:Synthetic Rubber. Temperature:-20° C to +45° C. Feature:Conveying medium: Industrial water, waste water, seawater and irrigation inagriculture. Character: The hose has dual performance that is able to bear positive & negative pressure, it is able to work freely under the vacuum-80kpa(600mm mercury column), without flat& delamination, has good flexural property. The rubber body is flexible, the burst pressure is at least treble than working pressure.
Construction: Inner Tube:�NBR, Black, Smooth. Reinforcement:Fine wire reinforced, Electrically conductive. Cover:Synthetic Rubber. Temperature:-20C to +45C. Feature:Conveying medium: Industrial water, waste water, seawater and irrigation inagriculture. Character: The hose has dual performance that is able to bear positive & negative pressure, it is able to work freely under the vacuum-80kpa(600mm mercury column), without flat& delamination, has good flexural property. The rubber body is flexible, the burst pressure is at least treble than working pressure.
Hydraulic orbit motor bmh: , advanced manufacturing devices for the gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency. , shaft seal can bear high pressure of back and the motor can be used in parallel or series. , special design in the driver-linker and prolong operating life. , special design for distribution system can meet the requirement of low noise of unit. , compact volume and easy installation Omh hydraulic motor main specifiction: Type Bmh 200 Bmh 250 Bmh 315 Bmh 400 Bmh 500 Displacement (cc/rev) 203.2255.9316.5406.4489.2 Max torque (n.M) Cont510621740850830 Int439348282220184 Max pressure (mpa) Cont17.517.517.515.512.5 Int2020201916 Max speed rate (rpm) Cont366290236183155 Int439348282220184 Max flow (l/min) Cont7575757575 Int9090909090 Weight(kg) 10.51111.512.313.0
Hydraulic orbit motor bmp Bmp series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the gerotor gear set design and provide compact volume, high power and low weigth. Characteristic features: Advanced manufacturing devices for the gerotor gear set, which provide small volume, high efficiency and long life. Shaft seal can bear high pressure of motor of which can be used in parallel or series. Advanced construction design, high power and low weight. Order code: Code Bmp Displacement 36 50 80 100 125 160 200 250 315 400 500 Flange 22-13.5 rhomb-flange, pilot 82.58 4-13.5 rhomb-flange, pilot 82.58 H44-3/8-16 square-flange, pilot 44.42.8 H54-m10 square-flange, pilot 44.42.8 Output shaft Ashaft 25, parallel key 8x7x32 Bshaft 32, parallel key 10x8x45 Cshaft 25.4, parallel key 6.35x6.35x31.75 Eshaft 25.4, splined tooth sae 6b Rshort shaft 25.4, parallel key 6.35x6.35x31.75 Fshaft 31.75, splined tooth 14-dp12/24 Fdlong shaft 31.75, splined tooth 14-dp12/24 Gshaft 31.75, parallel key 7.96x7.96x31.75 Tcone-shaft 28.56, parallel key b5x5x14 T3cone shaft 31.75, parallel key 7.96x7.96x25.4 Port and drain port Dg1/2 manifold mount 4xm8, g1/4 Mm221.5 manifold mount 4xm8, m141.5 S7/8-14 o-ring manifold 4x5/16-18unc, 7/16-20unf P1/2-14 nptf manifold 4x5/16-18unc, 7/16-20unf Rpt(rc)1/2 manifold 4xm8, pt(rc)1/4 Rotation direction Omitstandard Ropposite Paint 00no paint Omitblue Bblack Ssilver grey Unusually function Omitstandard Nbig radial force Ono case drain Ffree running Lslow speed
The features of this CBG-F3 series gear pumps are its drive helical gear and its shaft cover installed with double row angle contact bearing. This design can bear the radial and axial force caused by the working helical gear, to guarantee the working performance and service time of the gear pumps. This series pumps are mainly installed with the taking force port of the engine. And they are widely used in the agricultural machinery, for example: Wheat harvester, Corn harvester, etc.
Hydraulic orbit motor bmh: Advanced manufacturing devices for the gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency. Shaft seal can bear high pressure of back and the motor can be used in parallel or series. Special design in the driver-linker and prolong operating life. Special design for distribution system can meet the requirement of low noise of unit. Compact volume and easy installation Omh hydraulic motor main specifiction: Type Bmh 200 Bmh 250 Bmh 315 Bmh 400 Bmh 500 Displacement (cc/rev) 203.2255.9316.5406.4489.2 Max torque (n.M) Int439348282220184 Max pressure (mpa) Cont17.517.517.515.512.5 Int2020201916 Max speed rate (rpm) Cont366290236183155 Int439348282220184 Max flow (l/min) Cont7575757575 Int9090909090 Weight(kg) 10.51111.512.313.0 Substitute reference substance Motor cross reference table Hanjiu Hydraulicm+s Hydrauliceaton Char lynndanfossross Trwwhite Crossparkersam Brevinibosch Recroth Bmmmm mlhkj seriesomm Bgmmgx Bmp/bm1mp hph seriesomp dhmf mgwp rstc te tbbgmgp gxp Bmr/bm2mr hr mlhrw, rws, t series w seriesomr ds omewmbwr retfbrmgr gmr Bmh/bm4mh mlhh hw hwf Omhmeretg Bms/bm5ms msy mlhs2000 seriesomsmeretghprmgs gms Bmt/bm6mt mlht mtm6000 seriesomt tmtmj Htmgt, gmt Bmvmv mlhv10000 seriesomv Mgv gmv Hydraulic orbit motor applications: Brush cutters Mower Haveresting equipment Forestry equipment Turf equipment
GPC4 series high pressure gear pumps are one of imported high pressure gear pumps with introduction technology from VICKERS, U.S.A. GPC4 series high pressure gear pumps have the advantageous features of the axial flexible compensation and radial hydraulic balance. This series pumps can also be combined into multiple pumps to meet the special needs. GPC4 gear pumps can provide various kinds of mounting flanges, shaft ends and inlet & outlet oil connection with SAE and Chinese standards. They are widely used in the construction, walking machinery and other hydraulic systems.
G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain range of axial and radial force. Gear pump g5 is an external gear pump with axial flexible compensation and radial hydraulic balance. Adopting the structure of three sections, the pump is composed of front and rear cover, middle section, gear, pressure plate, seals, etc. G5 series high pressure gear pumps can be provided with various kinds of mounting flanges, shaft ends, and connection styles of inlet and outlet in both sae and chinese standards. Please refer to the table below. G5 series high pressure are widely applied in the hydraulic system of agricultural equipment such as tractors. These gear pumps are also used in engineered trucks.
Introduction: Model: HAPPY-200. Fuel Tank Thrust: 47T. Oil Pump Delivery Capacity: 30ml. Hydraulic Oil: Summer YB-N46. Winter YB-N32. Crimping inside diameter range: 6mm ~ 32mm. Weight of one machine: 100kg. Volume: 600*350*460mm.
101s series hydraulic steering control unit 1. The same function of the 101 series 2. Including integrated valve (relief valve and checkproof valve) 3. Replace danfoss (ospc), m+s (hku/4) series. 4.101s hydraulic steering unit is widely used in the steering control system Such as the steering system of many kinds of industrial and agricultural Mobile machinery forklift, loader, roadroller, tractor, comebine harvester, etc. 5.We produce the products match with the oem number of all machines
Hydraulic orbit motor bmp Bmp series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the gerotor gear set design and provide compact volume, high power and low weigth. Characteristic features: , advanced manufacturing devices for the gerotor gear set, which provide small volume, high efficiency and long life. , shaft seal can bear high pressure of motor of which can be used in parallel or series. , advanced construction design, high power and low weight.
Hydraulic orbit motor bmt Bmt series motor adapt the advanced gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications. Characteristic features: Advanced manufacturing devices for the gerotor gear set, which use low pressure of start-up, provide smooth and reliable Operation and high efficiency. The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications. Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation
