•spectral measurements of c&l-band dwdm passive components •noise simulation in dwdm systems •raman amplifier gain and gain flatness test. Obtain a corrugated cardboard shipping carton with inside dimensions that are at least 3 in. (6.5cm) taller
Applications: Long distance telephone, catv, data communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct Burial (with armouring). Construction: The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500n (short term installation); 900n (long term installation) Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter) Twist (torsion length): 125 x overall diameter Working temperature: -20íµ ~ +70íµ (pe sheath) Storage temperature: -40íµ ~ +70íµ (pe sheath) Product highlights: Small diameter and light weight. Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber Cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress And achieve better flexibility. íewide operating temperature range. Roll, box, drum
í= Applications: Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable, it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between floors. í= Installations: Installed along the wall, the roof, interlayer, canal and indoor. í= Construction: The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central element made of 3 sub-units. í=Technical Parameters: íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode) íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation) íe Minimum Bending Radius: Short Term Installation: 20 x Overall Diameter Long Term Installation: 10 x Overall Diameter (Non-Armoured); 20 x Overall Diameter (Armoured) íe Twist (Torsion Length): 125 x Overall Diameter. íe Working Temperature: -10íµ ~ +70íµ (PE sheath) íe Storage Temperature: -20íµ ~ +70íµ (PE sheath) í= Product Highlights: íe Small diameter and light weight. íe The high tension characteristics of the aramid yarn serving as strength member can offer good stability in the transmission performance. íe Compact and flexible construction are especially suitable for indoor installations. íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved with excellent strip ability. íe LSZH jackets can be offered for indoor application for which flame retardancy is required. íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation within the operating temperature range. íe Fiber geometry are strictly monitored to ensure superior transmission performance. roll,box,drum
4port USB Gigabit Network server style NO. SK-304U Functions: share the printer/scaner/copy marchine/CD room- by the local area network, just like the computer server functions, it is usefull for the small office and home works. Application Note USB Server Quick Start Guide Features .. 10/100/1000M RJ45 Ethernet .. USB1.1/2.0 High Speed Specifications compliant .. Supports High-Speed 480 Mb/s, Full-Speed 12 Mb/s, - & Low-Speed 1.5 Mb/s .. Supports USB Printers, USB Scanners, USB HDDs, - USB Pen Drives G�ªG�ª .. Shares USB Devices among Wired or - Wireless Network Users by connecting network via Wireless Router .. Supports IEEE 802.3 10Base-T , IEEE802.3u 100Base-TX and IEEE 802.3ab 1000Base-T .. Supports Auto-MDIX, Auto Crossover function .. Supports DHCP IP Address auto-configuration, or Manual-Set Static IP ***** Supports TCP/IP, UPnP, WSD .. Support Utility Software Web-based UI- Management Utilities Setup, Administration Password & Connected Devices Status Monitoring .. Drivers support Windows XP, Vista .. Supports Bonjour for MAC OS X or above Package Contents .. 1 x USB Server .. 1 x Network Cable .. 1 x CD (Drivern+�User Manual) .. 1 x Power Adapter Hardware Installation Please connect your USB Server device to- your router/switch as shown above and power it on. Connect your USB device to it. If your USB device needs to be powered on as well, please do not forget to do so. Now you are ready for software installation. Please read on. Software Installation 1. To start the installation process, please double click on the installer. 2. Then the installer will install - the necessary software on your PC. 3. When the automatic installation process completes An application shortcut will be installed on- the desktop of your PC: Please double-click on the short-cut to- start the application. Using the USB Device 1. Once the utility starts up, click to high-light the USB device you would like to use and click on the Connect Device button. 2. Once connected, you can see the device status changed to indicate connection has been established 3. The flash drive connected as an - example then can be used as if it is plugged into your PC via the USB port. 4. Any USB device connected via USB Server- utility should work as if they are plugged into the connecting PC via USB port. 5. Devices could be in any of the 3 following status: This status icon indicates that the - device is now free for connection. You can connect this device and use it. This status icon indicates that- the device is connected by you. This status icon indicates that- the device is connected by other users. You may NOT connect to it- until the device is free again. 6. To release a connected device, just select the device and click on the Disconnect Device button. gift
HDMI to HDMI Cable (V 1.4) This cable is based on new technology that gives you - the best data transmission between your HDMI source and- HDMI display unit. The five transmission pairs are with- identical electrical characteristics that provides- the best data transmission between devices. Triple shielded cable with durable connectors has- the best performance in maximize the data signal integrity, EMS and worst installation environment. With the ATC certification, this cable is fully fulfilling the requirements and up to- standard of HDMI organization. All materials of the cable are 100% RoHS compliant and- lead-free to protect our planet. Features: 1íóHDMI Ethernet Channel ¿C Adds high-speed networking to an HDMI link, allowing you to take full advantage of their IP-enabled devices without- a separate Ethernet cable. 2íóAudio Return Channel ¿C Allows an HDMI-connected TV with- a built-in tuner to send audio data "upstream" to a surround audio system, eliminating the need for a separate audio cable. 3íóSupports 3D ¿C Defines input/output protocols for major 3D video formats, paving the way for true 3D gaming and 3D home theater applications. 4íóSupports 4000X2000 Resolution ¿C Enables video resolutions far beyond 1080p, supporting next-generation displays that- will rival the Digital Cinema systems used in many- commercial movie theatres. 5íóAdditional Color Spaces ¿C Adds support for additional color models used in- digital photographyand computer graphics User selection 1íówire UL.VM-1, CL2, CL3, CMR, Teflon, LSOH 24-32AWG 2íóSurface Appearance PVC moulding Double-color PVC ABS Shell Zinc alloy / Aluminum alloy Flat Cable PVC moulding & Screw gift box
Conductor: Plain annealed Fire barrier: Mica Tape Insulation: XLPE Filler: Polypropylene yarn Binder Tape: Polypropylene Sheath : LSOH compound.
Applications: 10base-t, 100base-t4, 100base-tx, 100base-vg-anylan, 155mbps atm, 622mbps atm Working frequency: 1-100mhz Technical parameters: Characteristic impedance: 100ía15ª+ Nominal velocity of propagation(nvp): 69% Maximum dc resistance: 9.38ª+/100m Maximum mutual capacitance: 5.6 nf/100m Maximum capacitance unbalance: 330 pf/100m Maximum resistance unbalance: 5% Maximum propagation delay skew: 30 ns/100m Maximum propagation delay: 536 ns/100m 100 mhz Minimum bending radius: 10 x overall diameter Voltage rating: 60v rms Maximum pulling load: 80n Working temperature: -20 íµ ~ +60íµ Storage temperature: -5íµ ~ + 50íµ Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmp jacket); iec 60332-1 (frpvc & lszh jacket); iec 60332-1 & iec 60332-3c (lsfroh jacket) Product highlights: Provide excellent bandwidth beyond 100 mhz. Designed for use in data and voice backbone application. Meet the strict flame retardancy and environmental requirements in europe and us. Easily identifiable color code for ease of installation. Transmission properties: Freq: 100 (mhz) Roll, box, drum
Data & fiber optic cables, open martix system (oms), connecting hardware, real time patching system, cabling solutions , fire performance standard.
Fiber optic components and optoelectronic devices.
All kinds of cables.
Cable.
Cabling system(net cable/USB cable), AV and PC Accessories, Apple Cables, HDMI / DVI Cables, Audio & Video Cables, HDMI Cables, Mini DisplayPort, DisplayPort to HDMI/DVI, HDMI Adpater/Extender/Switcher/Splitter PSP/Wii/NDS/ XBOX 360 Cables, Cat5/6/7, Unshield and Shield Patch Cords, Cat5/6/7, KeyStone Jack(Unshield and Shield, Cat5/6/7, Lan Cable(UTP/STP/FTP/SFTP), The Optical Fiber Cables, Cat6/7, Unshield/Shield Data, Telecom Patch.
Cables, cable, fiber cable fire resistant & flame retardant, instrument cable, control cable, patch cord, fiber patch cord, telephone cables, electric wire & cable, communication cable, electric wire & cable , coaxial cable..
Mobile phones, digital camera, lens and accessories.
Applications: Long distance outside telephone, catv, data, communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial (with armoring). Construction: The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation) Minimum bending radius: Short term installation: 20 x overall diameter Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored) Twist (torsion length): 125 x overall diameter Working temperature: -40íµ ~ +70íµ (pe sheath) Storage temperature: -50íµ ~ +70íµ (pe sheath) Product highlights: All the fiber containing tubes are placed in concentric layers around the central member; through the control of The twist length, the fiber cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene, Are placed at the centre of the cables. Roll, box, drum
Agfa: DT1B, DT2B, LT2B, DM1B, DM2B, etc Fuji: DIHL, DIAL, DIHT, DIAT Kodak: DVB/DVB+, EIR-7,EHG-7,MIN-R S,MIN-R 2000 Konica: SD-P / SD-PC / SD-PM / SD-Q / SD-QC.
í= applications: 10base-t, 100base-t4, 100base-tx, 100base-vg-anylan, 155mbps atm, 622mbps atm, 1000base-t í= working frequency: 1-100mhz í= technical parameters: Characteristic impedance: 100ía15ª+ Nominal velocity of propagation(nvp): 69% Maximum dc resistance: 9.38ª+/100m Maximum mutual capacitance: 5.6nf/100m Maximum capacitance unbalance: 330pf/100m Maximum resistance unbalance: 5% Maximum propagation delay skew: 30 ns/100m Maximum propagation delay: 536ns/100m 100mhz Minimum bending radius: 10 x overall diameter Voltage rating: 60v rms Maximum pulling load: 80n Working temperature: -20íµ ~ +60íµ Storage temperature: -5íµ ~+50íµ Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmpjacket); iec 60332-1 (frpvc & lszh jacket); iec 60332-1 & iec 60332-3c (lsfroh jacket) í= product highlights: Provide excellent bandwidth beyond 200 mhz. Designed for use in data and voice backbone application. Meet the strict flame retardancy and environmental Requirements in europe and us. Easily identifiable color code for ease of installation. Different jacket options available for choice. í= transmission properties: Freq: 200 (mhz) Roll, box, drum
Working frequency: 1-100mhz Technical parameters: Characteristic impedance: 100ía15ª+ (1-100mhz) Nominal velocity of propagation(nvp): cmx, cm, cmr, Lszh 69%; cmp 72% Maximum mutual capacitance: 5.6nf/100m Maximum capacitance unbalance: 330pf/100m Maximum dc resistance: 9.38ª+/100m Maximum resistance unbalance: 5% Maximum propagation delay skew: 30ns/100m Maximum propagation delay: 536ns/100m100mhz Minimum bending radius: 10 x overall diameter Voltage rating: 80v rms Maximum pulling load: 80n Working temperature: -5íµ ~+50íµ Storage temperature: -20íµ ~+60íµ Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmp jacket); iec 60332-1(frpvc & lszh jacket); iec 60332-1 and iec 60332-3c (lsfroh jacket) Product highlights: Provide excellent bandwidth beyond 100 mhz. Meet the strict flame retardancy and environmental requirements in europe and us. Different jacket materials available for choice. Guaranteed acr value > 0 db 200 mhz. Special purpose cables can be offered according to customer request. Different jacket color options available for choice. í=transmission properties: Freq: 350; (mhz) Roll , box , drum
