4Port Usb Gigabit Network Server

4port USB Gigabit Network server


style NO. SK-304U

Functions:
share the printer/scaner/copy marchine/CD room-
by the local area network,
just like the computer server functions,
it is usefull for the small office and home works.

Application Note
USB Server Quick Start Guide
Features
.. 10/100/1000M RJ45 Ethernet
.. USB1.1/2.0 High Speed Specifications compliant
.. Supports High-Speed 480 Mb/s, Full-Speed 12 Mb/s, -
& Low-Speed 1.5 Mb/s
.. Supports USB Printers, USB Scanners, USB HDDs, -
USB Pen Drives G�ªG�ª
.. Shares USB Devices among Wired or -
Wireless Network Users by connecting network via Wireless Router
.. Supports IEEE 802.3 10Base-T ,
IEEE802.3u 100Base-TX and IEEE 802.3ab 1000Base-T
.. Supports Auto-MDIX, Auto Crossover function
.. Supports DHCP IP Address auto-configuration,
or Manual-Set Static IP ***** Supports TCP/IP, UPnP, WSD

.. Support Utility Software Web-based UI-



Management Utilities Setup,
Administration Password &
Connected Devices Status Monitoring ..
Drivers support Windows XP, Vista
.. Supports Bonjour for MAC OS X or above
Package Contents
.. 1 x USB Server
.. 1 x Network Cable
.. 1 x CD (Drivern+�User Manual)
.. 1 x Power Adapter
Hardware Installation
Please connect your USB Server device to-
your router/switch as shown above
and power it on. Connect your USB device to it.
If your USB device needs to be
powered on as well, please do not forget to do so.
Now you are ready for software installation.
Please read on.

Software Installation
1. To start the installation process,
please double click on the installer.
2. Then the installer will install -
the necessary software on your PC.
3. When the automatic installation process completes
An application shortcut will be installed on-
the desktop of your PC:
Please double-click on the short-cut to-
start the application.
Using the USB Device
1. Once the utility starts up,
click to high-light the USB device you would like
to use and click on the Connect Device button.
2. Once connected,
you can see the device status changed to indicate
connection has been established

3. The flash drive connected as an -
example then can be used as if it is
plugged into your PC via the USB port.
4. Any USB device connected via USB Server-
utility should work as if they
are plugged into the connecting PC via USB port.
5. Devices could be in any of the 3 following status:

This status icon indicates that the -
device is now free for connection.
You can connect this device and use it.

This status icon indicates that-
the device is connected by you.
This status icon indicates that-
the device is connected by other
users. You may NOT connect to it-
until the device is free again.
6. To release a connected device,
just select the device and click on the
Disconnect Device button.


gift