Find Verified Expanded Metal Mesh Suppliers, Manufacturers and Wholesalers

Tin box
Round shape 9 cm Dia
Rect shape 9 cm x 9 cm

Each set in polybag

Standards: Generally BS6500 VDE0250
Conductor: Class 5 annealed copper conductors to BS6360 / VDE0295
Insulation: PVC
Bedding: PVC
Braiding: Tinned Copper Wire Braid (TCWB)
Sheath: PVC (Type TM2 to BS7655)
Voltage Rating: 300/500V
Temperature rating:
Flexing -15ípC to +70ípC
Static -35ípC to +70ípC

Central loose tube cable contains one tube with 2 - 24 fibers, which is filled with water blocking gel. A water swelling tape is helically wrapped around the cable core. Either aramid yarn or fiber glass is wound around the tube to provide physical protection and tensile strength. The cable is jacketed with PE for water protection purpose. For direct burial, steel wire armour and corrugated steel tape armour are applied with an optional PE

Screen:
(overall screen)
(indiviudual screen + overall screen)
(overall screen + steel wire armour)
(individual screen+ overall screen+steel wire armour)
Sheath version: pvc/lsf/lsoh

Conductor material: solid plain annealed copper referred to bs6360
Insulation material: cellular high density polyethylene
Laying-up: pairs; units
Wrapping: polyester tape
Filler: petrolatum jelly filled
Screen: aluminium foil with overlapping
Bedding: polyethylene

Applications:
Long distance outside telephone, catv, data, communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial
(with armoring).
Construction:
The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a
Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable
Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation)
Minimum bending radius:
Short term installation: 20 x overall diameter
Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored)
Twist (torsion length): 125 x overall diameter
Working temperature: -40íµ ~ +70íµ (pe sheath)
Storage temperature: -50íµ ~ +70íµ (pe sheath)
Product highlights:
All the fiber containing tubes are placed in concentric layers around the central member; through the control of
The twist length, the fiber cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene,
Are placed at the centre of the cables.


Roll, box, drum

Metal abrasive

Here belowed is the scope of our products
Steel shot: s70 s110 s130 s170 s230 s280 s330 s390 s460 s550 s660 s780
Steel grit: g10 g12 g14 g16 g18 g25 g40 g50 g80 g120
Steel cut wire shot: 1.0mm 1.2mm, 1.5mm, 2.0mm
Stainless steel cut wire shot, 0.3mm, 0.4mm, 0.5mm, 1.6mm, 0.8mm, 1.0mm
Steel abrasives are used to clean a wide variety of surfaces and parts, for example
De-sanding and cleaning foundry castings
Descaling metal sheet, billets and profiles produced by the steel industry
Surface preparation prior to coating

Steel abrasives are used in the following industries and applications:
Foundries, metal producers, shot peening, surface preparation, general cleaning, granite cutting,
Chemical composition of the products:
C 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%.
Hardness:
Steel shot: 40-60hrc
Steel grit: 42-66hrc
Steel cut wire shot:1.0mm:51-53hrc ; 1.5mm:41-45hrc
Density:
Steel shot: 7.4g/cucm
Steel grit: 7.6g/cucm
Steel cut wire shot:7.8g/cucm
Microstructure: tempered marten site
High strength, long lasting ervin life: cast steel shot and grit: 2000 cycles;
Steel cut wire shot: 2800 cycles.



25kg in one bag, 40bags on one pallet, 20mt for each container

Cold-drawn seamless steel pipes and tubes .
Specification: external diameter from 8mm to 350mm wall thickness from 1mm to 30mm.
Cold-drawn steel bars: Specification: from 2mm to 120mm, ¡í5mm-¡í150mm
Manufacturer approved by GL, BV, KR, ABS,DNV, NK, LR, CCS AND RINA.

Bulk pack.

Zinc ingot.


Package: Bundled up with galvanized steel strips

Shot blasting for steel

25kg in one bag, 40bags on oen pallet, 20mt for each container

Non-inductive, dip coated, high moisture resistance.

Good reputation in use with filtering, dc blocking coupling and general communication equipment.

High reliable with its self-healing performance.

Coated with epoxy resin for superior heat resistance.

Operating temperature:-40c~+85c

Rated voltage:100.250.400.630vdc

Capacitance range:0.01~6.8uf

Capacitance tolerance:+/-5%, +/-10%

Product Property:
Molecular formula: Zn
Molecular Weight: 65.38
Physical Property: light grey metal fine powder.
Density: 7.14g/cm3
Melting Point: 419.4¡ãC
Boiling Point: 908%
Chemical property: insoluble in water, soluble in acid and alkali, slowly soluble in acetic acid, ammonia water, it has strong reducing performance and give out hydrogen. Lumps when being wet, keeps stable in dry air and generates white basic carbonate covering in its surface in wet air. When combusting in the air, it can generate blue green flame and generate zinc oxide. High pure zinc act slowly with sulfuric acid and nitric acid, while act fast when it contains few of other metals such as steel, tin and lead.