RFH 532nm green laser can mark the glass bottle quickly and safely
Compared with plastic feeding bottles, children's glass feeding bottles are safer when adding hot water, and are more prominent in terms of heat preservation and transparency.
The 532nm nanosecond green laser is safe and secure in marking children's glass feeding bottles
A few years ago, a manufacturer of children's glass baby bottles reached a cooperation with RFH and purchased a nanosecond green laser that had just been developed at that time for marking children's glass baby bottles.
RFH's production workshop adopts a dust-free workshop design, which has achieved the ultimate in safety, professionalism and environmental protection, which shows that RFH attaches great importance to production. The two green lasers accepted by the customer can scribble on glass milk bottles with an accuracy of about 0.2mm, and the scribing speed is very fast, which can be completed within a few seconds.
To ensure the safety of children's food, RFH 532nm green laser is obliged
Moreover, the RFH nanosecond green laser can be operated as long as it is plugged in, and the short pulse, high beam quality and high peak power emitted by the light spot can be used for extremely superior applications on glass, allowing the marking of glass milk bottles in all aspects. much easier. In addition, what attracts this manufacturer is RFH's craftsmanship and professionalism. It has been deeply moved by its more than ten years of research and development experience.
RFH 532nm Green Laser
The cooperation that RFH reached with customers a few years ago still maintains close contact with customers a few years later, and provides customers with free lifetime technical support to benefit more manufacturers.
For wafer scribing and dicing, you need the sharp edge of the UV laser
Wafer is the basic material used to manufacture IC. It is made into long silicon ingots after purification of silicon elements. When making integrated circuits, semiconductor materials should be used to melt polysilicon out of monocrystalline silicon ingots through multiple procedures, and then cut to produce Made. As an electronic component, it is used in many electronic products. The wafer area is usually small, so there is a high precision requirement in cutting and scribing.
Return visit UV laser scribing on the wafer, what's the customer's comment
has recently welcomed a number of return visits from . Among them, has been ordering cooperation with for five years. He is the first batch of manufacturers to use UV lasers for wafer scribing. At that time, UV lasers were not widely used, and after tried to scribe the wafer surface, immediately chose to visit and witness the possibility of wafer scribing.
Standing in the wave of laser technology, UV lasers win customers hearts with their strengths
For him, the traditional process of scribing the wafer surface has insufficient precision, slow speed, and many consumables that have plagued him for a long time. During the visit of , he witnessed the spot emitted by the UV laser continuously moving on the tiny wafer. It only took more than ten seconds to complete the complex scribing, and it was able to automatically complete the scribing without the involvement of employees. conduct.
24 hours of stable continuous operation and super long life can also satisfy the assembly line of
Moreover, in addition to the non contact processing of the material during operation, it only needs to be plugged in and no other auxiliary materials are needed to be lost, which greatly reduces the cost and waste. The 24 hour stable continuous operation and ultra-high life span can also satisfy the assembly line of Therefore, chose the ultraviolet laser at the beginning and has used it until now.
Nanosecond UV Laser
Every time there is a breakthrough in the research and development of UV lasers, understanding and congratulations. like many other customers, stands in the wave of laser technology, progresses and learns together with , and establishes a revolutionary friendship. Develop in different fields.
RFH nanosecond green laser used to mark Italian customers' home appliance
Today, with the continuous development of home appliances, the appearance of the home appliances and the information marking of the home appliances are particularly important. The RFH nanosecond green laser has recently been loved by Italian customers. He expressed interest to RFH through video and watched RFH's marking demonstration of its samples.
The unique Q-switching technology of the 35W green laser can be adapted to the marking machine of Italian customers
The RFH green laser is different from traditional markers. It uses the laser wavelength to make non-contact scribing on the surface of the material. The repetition frequency is wide and the single pulse can reach about 200kHZ. The superior quality beam ensures strict speed and quality in all frequency ranges. The smaller processing heat-affected zone minimizes the consumption of materials and greatly reduces the cost of compliance.
RFH 532nm green laser takes Italian customers to a new level in the field of marking
It is worth mentioning that RFH adheres to the spirit of independent innovation and uses unique Q-switching control technology to make green lasers suitable for various laser application control needs. Of course, it is not difficult to operate a machine such as RFH that has a very high marking quality and a fast reaching speed. Instead, it uses all-digital intelligent power control technology, which can perform real-time monitoring while simple operation. The integrated design, convenient equipment integration, externally controllable laser, and various conveniences made this Italian customer quite satisfied, and he immediately reached a purchase agreement and hoped to transport it as soon as possible.
RFH Nanosecond Green Laser
The RFH nanosecond green laser that arrived in Italy surprised customers. After being put into use, the customerâ??s products received more praise. For RFH, the successful development of the nanosecond green laser also brought RFH to a new level. Let them continue to move forward in the field of green lasers.
The leading industrial solid-state laser manufacturer
355nm UV laser cold processing FPC flexible circuit board can avoid stress, burrs and dust.
FPC flexible circuit boards need to use ultraviolet laser drilling, cutting, and scribing technology.
Ultraviolet laser can prevent FPC flexible circuit board from breaking when drilling and cutting
Our common mobile phones, TVs, computers, kitchen induction cookers, rice cookers, range hoods, chargers, remote controls and other electronic devices all need FPC flexible circuit boards.
When designing the corners of the FPC soft board, if the design is not right, the FPC flexible circuit board is prone to breakage. For the mobile phone field, it requires narrower and thinner, in order to avoid the case of scratching and breaking with the shell in the FPC through hole of the mobile phone B/C part, it is necessary to use ultraviolet laser cutting and scribing technology.
Ultraviolet laser is a cold light source with low thermal influence, and the focused spot can be as small as 15um. There will be no deformation or scorching of the FPC circuit board due to the high energy of the laser beam. It is very suitable for FPC flexible circuit boards during Micro-hole drilling processing.
2639 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
Lipolaser also knows as soft laser, cold laser, or low-level laser therapy, uses red light 650nm laser energy to penetrate the skin, when the fat cells are stimulated, the cell membrane will create the pores to release fatty acids and glycerol. The laser penetrates the layer of fat making fat from adipocytes (fat cells) pass into the interstitial tissue and is eliminated naturally by the body. The treatment session lasts for 10 minutes per zone and recommends a weekly session for 8-10 weeks.
355 nm Ultraviolet Laser manufacturer 3W5W UV laser
As the leading industrial solid-state laser manufacturer, RFH laser company offer 355nm ultraviolet laser, 532nm green laser and customized laser for a broad range of commercial, industrial, and scientific applications.
To meet the market demand, RFH newly developed S9 series UV laser in 2020. Comparing with its kinds, S9 series UV laser features with ultra-compact, high stability, high efficiency, high reliability and excellent laser beam quality.Its compact design suggests no necessity in building big light path, which greatly reduces space and cost and makes it easy to be installed into UV laser marking machines. In addition, S9 series cavity structure is more stability and more excellent scalability, which means the same laser cavity can be produces multi-power lasers , and the stability of different power ranges is greatly improved
S9 series uv laser characteristicsï¼? 1. Laser wavelength at 354.7nm, repetition rates cover a wide range(1 kHz to 200 kHz internal adjustable); laser power ranging from 3w-10w; 2. Exceptional beam quality (M²
Display Area: 23.1 inch (600 mm)
Dimension: 599.4 x 62.4 x 18.5 mm
Weight: 1.1kg
Resolution: 1920 * 158
OS: Android 6.0
Rated Wattage: â?¤ 15 W
Supply voltage: 12V
Wireless connectivity: WiFi & Bluetooth
Mounting method: Accessories for mounting on shelf
Target application: Retail store
Price inclusive: ***Content Management System and Price Management Software
ATMEL MXT224 is a 224-node highly configurable touchscreen controller which is part of Atmel's maXTouchâ?¢ product platform. By combining Atmel's patented Charge Transfer and XMEGAâ?¢ technologies, Atmel's engineering teams have produced an optimal and scalable architecture which enables smart processing of a capacitive touch image to accurately regenerate and report the user's interaction with the touchscreen.
1. Made of Alum housing and alum base plate with high-quality heat dissipation structure, equipped with clear PC cover.
2. High-brightness COB as light source.
3. Higher Power Output performance.
4. Environment-friendly and no UV or IR radiation.
5. Replacement of traditional metal halide and halogen PAR lights.
6. Energy saving up to 70%-80%
Applications:
Hotel rooms and lobbies, supermarkets, fashion shops, restaurants, offices, art gallaries, museums, corridors, exhibition halls, bars, residential houses, homes, etc.
Features:
1. Made of plastic housing and alum base plate with high-quality heat dissipation structure, equipped with milky PC cover.
2. New Designed and High-brightness Concentrated COB (CCOB) as light source.
3. Better CRI and High luminous intensity as compared with other products of same grade of power output.
4. Environment-friendly and no UV or IR radiation.
5. Replacement of traditional halogen or metal halide light bulbs.
6. Energy saving up to 70%-80%
Applications:
Hotel rooms and lobbies, supermarkets, fashion shops, restaurants, offices, art gallaries, museums, corridors, exhibition halls, bars, residential houses, homes, etc.
10W-20W-30W-50W LED Flood Lights / Tunnel Lights - IP65
Features:
1. Wide voltage range with various output range.
2. Environment-friendly and no UV or IR radiation.
3. Easy for installation and maintenance.
4. Replacement of traditional metal-halide or halogen lighting.
5. Long lifespan, low cost of maintenance.
6. Energy saving up to 70% and high luminous intensity.
Applications:
Outdoor Lighting or Tunnel Lighting for external walls of various commercial and residential buildings, tunnel and road lighting, garden lighting, etc.
Features:
1. Using high-brightness LED chips with high-quality aluminum channel to enhance heat dissipation.
2. Environment-friendly and no UV or IR radiation.
3. Easy for installation and maintenance.
4. Replacement of traditional lighting tubes to be cove lighting, or back lighting.
5. Long lifespan, low cost of maintenance.
6. Energy saving up to 70% and high luminous intensity.
Applications:
Mainly for Cove Lighting, Back Lighting and Decorative Lighting in Hotels rooms and lobbies, supermarkets, fashion shops, jewellry showcases, department stores, restaurants, offices, art gallaries, museums, corridors, exhibition halls, bars, residential houses, homes, swimming pools, etc.
1. Using high-brightness LED chips and silicone tubes and resin to enhance heat dissipation.
2. Environment-friendly and no UV or IR radiation.
3. Easy for installation and maintenance.
4. Replacement of traditional lighting tubes to be cove lighting, or back lighting.
5. Long lifespan, low cost of maintenance.
6. Energy saving up to 70% and high luminous intensity.
Applications:
Mainly for Cove Lighting, Back Lighting and Decorative Lighting in Hotels rooms and lobbies, supermarkets, fashion shops, jewellry showcases, department stores, restaurants, offices, art gallaries, museums, corridors, exhibition halls, bars, residential houses, homes, swimming pools, etc.
7W LED Recessed Down Light (IP65 & Fireproof) - COB
Features:
1. Wide voltage range with various output range.
2. Environment-friendly and no UV or IR radiation.
3. Easy for installation and maintenance.
4. Replacement of traditional lighting fixtures.
5. Long lifespan, low cost of maintenance.
6. Energy saving up to 70% and high luminous intensity.
Applications:
Hotels, supermarkets, fashion shops, restaurants, offices, lobbies, art gallaries, museums, corridors, exhibition halls, bars, residential houses, homes, etc.
20W-25W LED Surface-mounted Ceiling Down Light - COB
Features:
1. Wide voltage range with various output range.
2. Environment-friendly and no UV or IR radiation.
3. Easy for installation and maintenance.
4. Replacement of traditional lighting fixtures.
5. Long lifespan, low cost of maintenance.
6. Energy saving up to 70% and high luminous intensity.
Applications:
Hotels, supermarkets, fashion shops, restaurants, offices, lobbies, art gallaries, museums, corridors, exhibition halls, bars, residential houses, homes, etc.
2639 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
