Material: 100% Mulberry Silk Silk fabric thickness: 16 momme, 19 momme, 22 momme, 25 momme, 30 momme Available in around 60 solid colors.
We are an OEM Garment factory located in Guangdong China. We manufacture according to your design and specifications and provide private label service with custom packaging if required. We pride ourselves in high quality craftsmanship and transparency with our customers. We try our best to keep MOQ to a minimal and assist our new customers anyway we can. Our Hotel grade Bamboo 4pc Queen sets comes in 200TC, 300TC, and 400TC; 100% Bamboo fiber. On-site factory visits are encouraged and welcome.
natural light brown color 20.5mic
20.5mic 40-50mm
30.5mic
FBG (Fiber Bragg Grating) Alxenses’s offers a series of fiber-optics products based on Fiber Bragg Grating (FBG) technology. FBG is produced in optical silica fibers by creating periodic refractive index variations in the fiber core using UV laser light. FBG is an in-line optical filter and its reflection wavelength and spectral shape depends on the periodicity, length as well as depth of the refractive index changes of the grating structure. FBG exhibits very low loss and is low-cost compared to the bulk-optics counter parts. By altering the grating periodicity and refractive index change, FBGs for various fiber-optics communication and sensing applications can be easily produced. Features: •High reliability and stability •High reflectivity •High side-lobe suppression ratio •Low insertion loss •Narrow bandwidth optical filter •Immunity to EMI •Multiplexing capability Applications: •Strain fiber optics sensor •Temperature fiber optics sensor •Displacement fiber optics sensor •Humidity fiber optics sensor Both Acrylate and Polyimide coated FBGs are available. Note: Acrylate and polyimide are the two common coating materials for optical fiber. The polyimide coating withstands higher operating temperature (up to 300°C) than Acrylate material (up to 85°C). Features: •High reliability and stability •High reflectivity •High side-lobe suppression ratio •Low insertion loss •Narrow bandwidth optical filter •Immunity to EMI •Multiplexing capability Applications: •Strain fiber optics sensor •Temperature fiber optics sensor •Displacement fiber optics sensor •Humidity fiber optics sensor
Chirped FBG (Fiber Bragg Grating) Alxenses’s Chirped fiber Bragg grating is an in-fiber broadband reflective optical filter. Using advanced fabrication technique and production facilities, grating period and refractive index modulation depth along the length of FBG can be precisely controlled to produce chirped fiber Bragg grating with different spectral and dispersion characteristic. The broad bandwidth and customizable spectral shape of chirped fiber Bragg grating is particularly effective in gain and spectral flattening of EDFA or ASE optical source. Features: •Low insertion loss •Customize reflection spectrum •Wide bandwidth Applications: •ASE filtering •EDFA gain flattening •Broadband reflector for fiber laser •Dispersion compensation
Fbg (fiber bragg grating) array Alxenses’s fiber bragg grating (fbg) array is produced using advanced fabrication technique to write many fbgs in a single strand of optical fiber without any splicing points. The mechanical strength of alxenses’s fbg arrays is therefore significantly better than fbg arrays produced by slicing many fbg arrays produced by slicing many fbgs together. The high quality fbg array with customized wavelength and spacing allow distributed measurement over long distance. Fbg arrays are particular suitable for large-scale sensing in strain, temperature or pressure monitoring in oil, gas, civil engineering, aviation and marine industries. Features: •low insertion loss •spliceless fbg array •customized fbg array configuration •accurate fbg wavelength and reflectivity Applications: •large-scale strain and temperature monitoring in oil, gas, civil engineering, aviation and marine industries.
OM3 10G fiber optic patch cables which are used for 10Gigabit Ethernet applications. It also called multimode OM3 10G Aqua fiber optic cables. IEEE802.3ae defined the 10Gigabit Ethernet standards used in LANs. OM3 50/125um multimode fiber optic cables are developed for such 10Gig Ethernet applications. Plastic PE bag and cartons.
Armoured Fiber Optic Patch Cord is with stainless steel tube inside the outer jacket to protect the central unit of the cable, the armored fiber optic patch cords are easy to use in harsh environment, what is more , they are flexible as well, handling these armored fiber optic patch cables are as easy as handling electric cables. High tensile strength, pressure resistance, re-twist resistance, prevents bite by the rodents Electric cable-like handling and easy installation. Plastic PE bag and cartons.
Fiber Optic Patch Panel is a box for protecting the optical cable and pigtail splice in the cable laying. It is mainly used for the straight-through connection and branch connection of the indoor optical cable and the fixing of the cable terminal, and functions as a pigtail storage and protection joint.
Our dome fiber optic splice closure is made of PP/ABS alloy material it's strong and light, it can efficaciously prevent the lighting strike and erosion and aging and fire resist. The tray is pulled down, so it's easy installation, don't need to dismantle other trays, the material of the sealing is silica gel, it can repeatable operation.
AWF Global Trading Company Limited is a leading supplier of high-quality raw cotton from India. We offer a variety of grades and types of cotton to suit your needs, such as Shankar-6, MCU-5, J-34, and MECH-1. Our raw cotton has excellent fiber strength, length, and fineness, as well as low trash and moisture content. We can provide large quantities of raw cotton at competitive prices and deliver them to your destination in a timely manner. Contact us today to get a quote and place your order. AWF Global Trading Company Limited is your trusted partner for raw cotton.
Applications: Long distance telephone, catv, data communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct Burial (with armouring). Construction: The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500n (short term installation); 900n (long term installation) Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter) Twist (torsion length): 125 x overall diameter Working temperature: -20íµ ~ +70íµ (pe sheath) Storage temperature: -40íµ ~ +70íµ (pe sheath) Product highlights: Small diameter and light weight. Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber Cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress And achieve better flexibility. íewide operating temperature range. Roll, box, drum
í= Applications: Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable, it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between floors. í= Installations: Installed along the wall, the roof, interlayer, canal and indoor. í= Construction: The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central element made of 3 sub-units. í=Technical Parameters: íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode) íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation) íe Minimum Bending Radius: Short Term Installation: 20 x Overall Diameter Long Term Installation: 10 x Overall Diameter (Non-Armoured); 20 x Overall Diameter (Armoured) íe Twist (Torsion Length): 125 x Overall Diameter. íe Working Temperature: -10íµ ~ +70íµ (PE sheath) íe Storage Temperature: -20íµ ~ +70íµ (PE sheath) í= Product Highlights: íe Small diameter and light weight. íe The high tension characteristics of the aramid yarn serving as strength member can offer good stability in the transmission performance. íe Compact and flexible construction are especially suitable for indoor installations. íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved with excellent strip ability. íe LSZH jackets can be offered for indoor application for which flame retardancy is required. íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation within the operating temperature range. íe Fiber geometry are strictly monitored to ensure superior transmission performance. roll,box,drum
Hydroxyethyl Cellulose(HEC) Hydroxyethyl cellulose is a gelling and thickening agent derived from cellulose. It is widely used in cosmetics, cleaning solutions, and other household products. Hydroxyethyl cellulose is also used extensively in the oil & gas industry as a drilling mud additive under the name HEC as well in industrial applications, paint & coatings, ceramics, adhesives, emulsion polymerization, inks, construction, welding rods, pencils and joint fillers.
1. Descriptions Mechanical Splice, namely Quick Splice, is a fast connection method of Optical Fiber, very easily installable and re-usable, no need splicing machine or adhesive, mainly used for drop cable quick repair 2. Features Proven mechanical splice technology, accurate Optical Fiber alignment A-level Zirconia ceramic V-groove design, high Optical Fiber docking accuracy, low Insertion Loss of 0.15 dB Precise metal alloy components coaxial autocollimator on the core, durable connection Low thermal expansion/contraction coefficient core material , strong environmental adaptability High tensile strength 50N Simple operation - without fusion splicing, fast installation - 10s splicing, high success rate - 99% Applicable Optical Fiber Cable 2.0mm, 3.0mm, 2.0*3.0mm Suitable Optical Fiber 250/900um SM/MM Different models for different scenarios, Black or White color usually Long service life 10 years, simple and convenient later maintenance Product warranty 12 month, no quality worry 3. Applications FTTX deployment Optical Fiber Cable repair Data communication 4. Specifications Insertion loss: average: 0.15dB, max. 0.20dB Return loss: 50dB Tensile strength: 50N Working temperature: -40C - +85C Repeated assembly times: 10 Splice size: 38*6.4*3.9 mm Protector size: 90*8.6*7.4 mm Package: 50 pcs/box 5. Advantages & disadvantages Advantages: price just 30% - 40% of top quality Optical Fiber Mechanical Splice like 3M, Fujikura, Corning, etc. Disadvantages: insertion loss (IL) 0.15dB, a little higher than top quality, whose insertion loss (IL) 0.10dB, but still lower than 0.20dB ~ 0.30dB of many other suppliers Conclusion: economic product
MPO Fiber Optic Cable MTP MPO fiber optic cable provide the higher bandwidth needed for HD conferencing and HDTV configurations. We offer MTP fiber optic cable in a variety of types and lengths; MPO stands for "Multi-Push-On-Over-Optical"; MPO fiber optic cable have a higher port density, and are available in a wide range of sizes. MTP multi-fiber cabling system is ideally suited for a high density environment that demands space saving and innovative cable management solutions; MTP supports various connections from multi-fiber to single fiber out. MTP (male or female) - MTP (male or female) OM4 12 strands Multimode ,LSZH jacket,Polarity B
•spectral measurements of c&l-band dwdm passive components •noise simulation in dwdm systems •raman amplifier gain and gain flatness test. Obtain a corrugated cardboard shipping carton with inside dimensions that are at least 3 in. (6.5cm) taller