Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Special Structual Spray-coat material for running track surface installation ,consume 1.20-1.25KG/m2 to achive 3mm Spray-coat Running track PU1:2 Spray-coat track material is an pigmented and solvent free thixotropic, two component polyurethane material with expanding form, strong resistance ,elastic properties, should be mix two component on project site, Spray-coat Running tack PU1:2 Spray-coat track material is easy to apply ,it shows excellent resistance to moisture during the curing phase and a good curing behavior even at low temperature
Plastic Cup is used for spray gun. It has combined the advantages of paper strainer and mixing cup. Moreover, this plastic cup would instead of traditional cup on the paint gun, and make your painting like more convenient. How to use it Firstly, Mix the paint, curing agent and diluent together. Secondly, put the inner cup into our cup. Thirdly, Cover lid. Fourthly, using Collar to fasten it. Finally, install the spray gun using proper adaptor. Details: - Mix the paint, curing agent and diluent together. Scale on the cup is accurate. (instead of mixing cup) - Has filter net on the lid which could filter the paint. (instead of paper strainer) - Disposable product. Do not need to waste time to clean it. (instead of traditional reused cup on the spray gun) - No silicon. - Easy to operate. - Convenient, save Labor,time and money.
