1. Current overload or line surge shutdown 2. High temperature compressor shutdown. 3. High pressure alarm shutdown. 4. Low pressure alarm shutdown. 5. Low oxygen cocentrator alarm. Oxygen concentrator: 0.5-5L/min Purity: 95%+_3% Working system Continuous Power Supply AC230V.50Hz/AC220V.60HZ AC120V.60Hz Power: 390VA Net Weight: 16kg( Gross weight: 18.5kgs) Warranty: Long-life compressor designed for 1000 hours of maintenance-free use. Size: 33*26*54cm
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Two tier Galvanized double deck bike rack/bicycle rack For all types of bicycles 2 tier bike rack can accommodate all types of bicycles, such as mountain bikes and town bikes, and any bicycles can also be chained for extra security. Once placed, the bicycle is well supported by wheel channels and the back wheel is stabilised by a gutter to lock the bicycle firmly. The lower rack has a sloping wheel channel, so the user does not have to bend between the levels which makes the cycle parking system simple and easy to use for all ages. This 2 tier bicycle rack is excellent for space saving as the cycle stands are compact with a centre to centre distance of around 370 mm. There is also the option to have the powder coated in any of the 192 RAL colours. Double deck bicycle rack features: 1.This double deck bicycle rack can park 2 bikes per set(one up, one down). 2.assembled in underground garage. 3.used for public place such as hosipital, school etc. 4.beautify the environment. 5.can Save space and prevention of theft.
California almonds, pistachios, saudi arabian dates, ajwa, khidari, medjool, cashew nuts w240, cashew kernels w320, uht milk, oats, rolled oats, soybean meal, soybean oil, ghee, soya lecithin liquid, processed milk goods, skincare products, branded fmcg goods, confectionery, soft drinks, food items, european cosmetics, korean cosmetics, beauty face masks, 1121 sella basmati rice, s30 sugar, icumsa 45, 5% parboiled rice, lentils, soya chunks.Sourcing agent, warehousing solutions, oem manufacturing
Origin: Kazakhstan DIESEL GASOIL EN-590 PPM 10 USLD 10 Quantity: 50,000- 10,000,000 METRIC TON per month Delivery: CIF / DIP & PAY CIF Price: $550 Gross/$530 Net Per Metric Ton AVIATION KEROSENE (JET A1 91-91) Quantity: 1,000,000-10,000,000 Barrels per month Delivery: CIF / DIP & PAY Price: Gross $90/$80 Net Per Barrel CIF STANDARD TRADING PROCEDURE 1. Buyer issues ICPO with Company Profile and Buyer Passport Copy, Company's registration Copy. 2. Seller acknowledges ICPO and issue to Buyer a Letter of Acceptance and Guarantee. 3. Seller issue Draft Contract SPA to Buyer. Buyer review SPA open for any amendment, sign and return to Seller for approval. 4. Seller registers and legalizes the signed Sales and Purchase Agreement contract and provides the registered, legalized and notarized SPA including PPOP as listed below. A. Certificate of Origin. B. Commitment to Supply. C. certificate of conformity D. Statement of Availability of the product. E. Product Export license for Allocation Issued by Ministry F. Product Allocation payment invoice at buyer's expense. 5. Upon buyer securing allocation, Seller issues and register the Full set of POP with the Ministry of Energy and Justice, and with the loading Port Authorities, and charter of vessel for product Shipment. 6. Seller send to Buyer the full set of POP documents, vessel documents including SGS report at Origin Country to Buyer (by Bank to Bank and by email). Loading commence according to shipment schedule for departure from origin port within the specified working days after Buyer final notification of POP verification and Confirmation. POP DOCUMENTS: a) Certificate of Incorporation b ) Act of Transfer c) Commercial Invoice d) Company Tax Payer�¢??s Certificate e) Fresh SGS Report at Loading Port f) Tank Receipt g) Vessel Q&Q and Quality Specification h) Bill of Lading i) Certificate of Non-Wooden Package j)Notice of Readiness (NOR) k) Estimated Time of Arrival (ETA) l) Authorization To Sale (ATS) m) Cargo Declaration / Conforming Warrant n) Charter Party Agreement (CPA) to transport the product to the Discharge Port o) Ullage Report p) Customs Declaration Certificate. q) Product Allocation Certificate r) Notarized NCNDA/IMFPA and Endorsed by Seller Bank 7. within 3 banking days of the Vessel arrival at Buyer destination port, upon Buyer's Confirmation and satisfaction with product buyer makes payment via TT/MT103 to Seller against Shipping documents and Title transfer. 8. Product discharged into Buyer's storage facility/vessel, and Seller pays commission to all intermediaries within 24 hours after receiving payment from Buyer.
- Icumsa 45, 150, 600, 1200. - Packaging: 50kg. DLC / LC TRANSFERABLE BUYER SENDS LOI + ID (PASSPORT) + BUYERS CIS + COMPANY REGISTERED OF THE SIGNATORY OR COMPANY CEO/MANAGER SELLER SENDS FCO TO THE BUYER BUYER SIGNS AN RETURNS THE SIGNED FCO WITH AN ICPO + BCL / RWA SELLER SENDS THE DRAFT SALES AND PURCHASE AGREEMENT (SPA) TO BUYER WIHTIN 48 HOURS: BUYER SIGNS BACK THE SPA, INPUTS AUTHORIZED SIGNERS PASSPORT, PROOF THAT THE SIGNER IS AUTHORIZED TO SIGN THIS CONTRACT, THE INCORPORATION CERTIFICATE OF COMPANY AND SENDS ITS OWN COMPANY CIS/KYC AND THE CIS/KYC OF THE ISSUER OF THE FINANCIAL INSTRUMENT IF BUYER IS USING A FINANCIER TO ISSUE THE PAYMENT GUARANTEE AND BUYER SENDS BACK SELLER SIGNS THE SPA AND SENDS BACK ACCOMPANIED WITH THE PROFORMA INVOICE BUYER RETURNS THE PROFORMA INVOICE SIGNED WITH A RWA (READY WILLING AND ABLE) ISSUED BY BUYERS BANK ON THE BUYERS NAME TO SELLERS BANK AFTER HAVING BEEN SIGNED AND STAMPED MANUALLY BY THE SELLER AND BUYER, SELLER WILL SEND VIA THE DOCUSIGN SERVICE FOR THE MANAGEMENT OF ELECTRONIC SIGNATURES AND DIGITAL TRANSACTIONS (https://www.docusign.com/) AND DEEMED AS HAVING ORIGINAL VALUE WITH ALL THE ASSOCIATED LEGAL AND LEGAL SCOPE. IT WILL THEREFORE BE A SUBSTITUTE FOR THE ORIGINAL PAPER WITHIN 7 BUSINESS DAYS, BUYER ISSUES THE FINANCIAL INSTRUMENT DRAFT REAL DRAFT FROM THE BANK WITH ALL RELATED INFORMATION FULLFILL INCLUDING THE CONFIRMING BANK DETAIL- TO SELLER BY OFFICIAL EMAIL SELLER VALIDATES DRAFT WITH FIDUCIARY FIRM AND INDICATES THE REVIEWS IF NEEDED OR ADVISES IF THE FINANCIAL INSTRUMENT CAN BE OPENED (NO FINANCIAL INSTRUMENT SHOULD BE SENT DIRECTLY TO THE BANK WITHOUT PRIOR VALIDATION OF THE DRAFT. OTHERWISE, IT WILL BE REFUSED AND THIS WILL CONSTITUTE A BREACH OF BUSINESS) BUYERS BANK ISSUES A PRE-ADVICE SWIFT MT799 STATING THEY ARE READY TO ISSUE THE MT700-LC TO THE DESIGNATED BANK TO RECEIVE IT THE FIDUCIARYS BANK RESPONDS BY SWIFT AND AGREES TO RECEIVE THE SWIFT MT700-LC IN THEIR BANK BUYERS BANK SENDS THE SWIFT (MT700) MESSAGE TO THE FIDUCIARYS BANK [WITHIN 10 DAYS MAXIMUM AFTER THE FINANCIAL INSTRUMENT IS OPENED, 2% PERFORMANCE BOND IS GRANTED TO BUYERS BANK] WITHIN 35/40 DAYS MAXIMUM AFTER THE FINANCIAL INSTRUMENT IS OPENED, DELIVERY STARTS WTHIN 3 BUSINESS DAYS AFTER THE SHIPPING DOCUMENT INCLUDING SGS REPORT IS GIVEN TO BUYER, REAL PAYMENT IS RELEASED BY MT103/TT AT LOADING PORT.
Commodity: Jet Fuel A1 Origin: Non-Sanctioned Quantity: 4 Million Barrels Price: 84 USD Gross Commodity: En 590 10 PPM Origin: Non-Sanctioned Quantity: 200.000 MT Price: 560 USD Gross VOPAK TO VOPAK PROCEDURE 1. Buyer Sends CIS with the purchasing product to Seller through Seller's Mandate for verification: 2. Seller Company assigned Vopak Botlek Europoort Terminal Manager to buyer. 3. Buyer finalize the Vopak Botlek Europoort protocals through the Vopak Botlek Europoort Terminal Manager, obtain the following and submit the same to seller company as listed below. * Vopak Botlek Europoort Barcode - Vopak Botlek Europoort Registration information. * Exact name and reference of their Vopak Botlek Europoort account. �¢?? 3b. Format of Authorization Form to accompany the information. LETTER OF AUTHORIZATION: We, (Buyer Name), with registered Office, at (Address). represented by Mr. ________________, with Passport number ________________. Owner of tanks at Royal Vopak Rotterdam, with contract reference number: _____________. 4. Seller Company sends Cl for Buyer's endorsement. Buyer sign the CI and return back within 24 hours of receiving alongside side with Vopak Botlek Europoort Barcode and Sign Letter of Authorization. 5. Seller Company gives Buyer Full POP documents along with fresh SGS (less than 48 hours onetime official confirmation mail from SGS official). * Fresh SGS Report or Saybolt (Not later than 24 - 72 hours) * Tank Storage Receipt (TSR) with GPS Coordinates of where the Tanks/Vessel are located. * Injection Report Agreement * Authorization to Sell * Authorization to verify the product in the tank (ATV) * Country Certificate of Origin * Approved Dip Test Authorization (DTA * Availability of Product, * Commitment to Supply, 6. After verification of full POP by buyer, injection begins. 7. Upon completing the Injection, seller Company transfers title to buyer. 8. Buyer makes full payment after via MT103, seller Company pay commission to the intermediaries
All our Avocados are grown at 1,000-3,000m above sea level with maximum day temperatures of 28C & night temperatures of 12-15C. This is very different to product grown in Spain, Mexico, South America, New Zealand & Australia which grow mainly at Sea Level, and in very dry areas with a lot of heat. Our Avocados do not get stressed as they grow at high altitude. During the day the trees and the fruit grow, and at night they rest. As a result of this the fruit takes an extra one -two months to mature. This results in a superb Avocado with a strong colour, rich flavourand nice texture. Due to the rains we get twice a year around the Equator the trees grow naturally. There is need for additional irrigation during the dry season but not much water is used. This means our water footprint is also very low. At high altitude there are very few pests and diseases & the trees continue to grow and with minimal pest pressure so there is little to no chemicals sprayed. Our Frozen Avocados are harvested at optimal maturity, and then natural ripened. After this each avocado is handled, one by one, by our team of ladies who are skilled food handlers & have been trained on post-harvest Avocado processing, to prepare the halves, chunks and slices. Each piece of the Avocado is handled with a lot of care, and individually frozen at -35C to capture the essence of the fruit and not allow any damage.We can pack for consumers in 300gms / 500gms 1kg, 2kg or 5kg ziplockbags.
We are state of the art production technology for various microalgae species. Our modular design enables us to simultaneously cultivate several algae species, alongside specific nutritional enrichments, allowing to attend to market & customer needs. Our professional team developed thorough and exclusive know-how of commercial cultivation protocols for 9 selected species., targeting major business sectors: Aquaculture, Nutritional supplements. If any hatchery who is interested, we can put them to talk to the specialist directly.
All types of products sourcing. electronics & consumer goods: mobile phones, laptops, home appliances, and accessories, industrial equipment: machinery, generators, and industrial tools automotive parts: tires, engines, and automotive accessories textiles & apparel: clothing, footwear, and fabrics furniture: indoor and outdoor furniture, office furniture food products: food additives, spices, seafood (e.g., tilapia, shrimp) packaging solutions: custom packaging, food grade plastic containers, and eco friendly options, building materials: tiles, flooring, doors, and windows, solar products & renewable energy equipment other products..Product sourcing, import and export, oem and private labeling, quality control, logistics and shipping specialist, and retail distributor.
Diesel, jet a1 fuel, en590, lng gas and icumsa 45 sugar from brazil,.International trading
Sugar, Rice, Noodles, Cooking Oil, Confectionery, Biscuits, Flour, Coffee, Tea, Sodas, Laundry Detergent Powder, Soap, Butane Gas, Textiles, Fabrics, Footwear, Clothing, Washing Machines, Fans..
Instant Coffee Vending Machine Model: E-40SCW (LED light box for advertisment) Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz 1600W, 100-120V/60Hz 1600W Powder Canister: 4 Pcs/1500 ml each Boiler/Heater: 1.6L Drinks Supply: 4 Hot/Cold Drinks+Hot/Cold Water Cooling System : Electronic cooling system 0.8L/65W (default), compressor cooling system 1.6L/225W(Optional) Operating Button: 10 smart touch buttons Display Screen : Digital Screen Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(3 Ways): Bottled water on top (up-side-down) or Water from purifier Or Bottled water at the bottom by the pumping system Suitable Material : Any kinds of instant powder material Machine Size : W340xD450xH700mm Packing Size : W405xD525xH780mm N.W/G.W : 24/26.5 Kgs
Instant Coffee Vending Machine Model: E-30SCW (Multi-media player for advertisment) Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz 1600W, 100-120V/60Hz 1600W Powder Canister: 3 Pcs/1500 ml each Drinks Supply: 3 Hot/Cold Drinks+Hot/Cold water Boiler/Heater: 1.6L Cooling System: Electronic cooling system 0.8L/65W (default), compressor cooling system 1.6L/225W(Optional) Operating Button: 8 smart touch buttons Display Screen : Digital Screen Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(3 Ways): Bottled water on top (up-side-down) or Water from purifier Or Bottled water at the bottom by the pumping system Suitable Material : Any kinds of instant powder material Machine Size : W320xD450xH700mm Packing Size : W385xD525xH780mm N.W/G.W : 22.5/24.5 Kgs
Instant Coffee Vending Machine Model: E-30SCW (LED light box for advertisment) Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz 1600W, 100-120V/60Hz 1600W Powder Canister: 3 Pcs/1500 ml each Drinks Supply: 3 Hot/Cold Drinks+Hot/Cold water Boiler/Heater: 1.6L Cooling System: Electronic cooling system 0.8L/65W (default), compressor cooling system 1.6L/225W(Optional) Operating Button: 8 smart touch buttons Display Screen : LCD Screen Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(3 Ways): Bottled water on top (up-side-down) or Water from purifier Or Bottled water at the bottom by the pumping system Suitable Material : Any kinds of instant powder material Machine Size : W300xD450xH700mm Packing Size : W385xD525xH780mm N.W/G.W : 23.5/26 Kgs
Cold Juice Vending Machine Model: J-40SC-8(Touch Button) Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz&110-120V/60Hz Boiler/Heater : 0.8L/1600W Material Canister : 4x5000g concentrated juice Drinks Supply: 4 cold juice Operating Button : 8 smart touch buttons Cooling System : Compressor cooling system 1.6L/425W Display Screen : Digital Screen Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(2 Ways): Water from purifier or Bottled water at bottom by pumping system Suitable Material : Any kind of concentrated juice Machine Size : W380xD490xH780mm Packing Size : W450xD595xH860mm N.W/G.W : 39/43 Kgs
Cold Juice Vending Machine Model: J-20C-T(Touch Button) Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz&110-120V/60Hz Boiler/Heater :12L/1500W Material Canister : 2x5000g concentrated juice Drinks Supply: 2 cold juice Operating Button : 2 smart touch buttins Cooling System : Compressor cooling system 6L/425W Display Screen : Digital Screen Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(2 Ways): Water from purifier or Bottled water at bottom by pumping system Suitable Material : Any kind of concentrated juice Machine Size : W320xD490xH780mm Packing Size : W395xD595xH860mm N.W/G.W : 29/33 Kgs
Cold Juice Vending Machine Model: J-40SC-T(Physical Button) Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240/50Hz&110, 110-120V/60Hz Boiler/Heater :12L/1500W Material Canister :4x5000g concentrated juice Drinks Supply: 4 cold juice or 4 hot juice Cooling System : Compressor cooling system 12L/425W Big Advantage : Support to make drinks simutaneously Operating Button: 4 Physical Buttions Display Screen : Digital Screen Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(2 Ways): Water from purifier or Bottled water at bottom by pumping system Suitable Material : Any kind of concentrated juice Machine Size : W445xD610xH860mm Packing Size : W520xD680xH920mm N.W/G.W : 52/60 Kgs