Cooling pad is a kind of special paper honeycomb structure material, its working principle is "water evaporation absorbs heat" , through the water under the action of gravity, from dirty, cooling pad in corrugated fiber paper surface water film formation, when air flows through the cooling pad of water film evaporation after water absorbs heat from the air, take away a lot of latent heat, Make the air temperature through the cooling pad lower, so as to achieve the purpose of cooling. Customized color according to customer requirements, performance is the same as brown
Using the cooling system of cooling pad, the principle of water evaporation and heat absorption& the principle of negative pressure ventilation, to discharge the waste gas and dirty gas in the workshop, greenhouse or animal breeding shed and relieve the high temperature and sultry. After installation, it can effectively improve the high temperature and sultry environment in the workshop. It can make the temperature in the workshop (32-45â?? high temperature environment) drop rapidly within 10 minutes, and keep the temperature at 26-30â??. Its cooling ventilation effect, can be very effective to solve 95-99% of the workshop, greenhouse or animal breeding shed high temperature sultry, air dirty problem. Keeping the indoor temperature in the most comfortable working environment and the suitable temperature for the growth of animals and plants can improve the working efficiency of workers and the output of agricultural and sideline products.
Lung Ventilator for easy breathing
As one of the best internationally recognized food antioxidant, TBHQ has been widely used in oil industry and food industry which the product contains oil in dozens of countries and areas. It replaced traditional antioxidant promptly. L&P TBHQ quality standard completely complies with standard FCC-Vï¼?GB26403-2011. Product quality executive standard: FCC-V, GB26403-2011 Item Standard Limit Assay (TBHQ) â?¥99.0 t-Butyl-p-benzoquinone â?¤0.2% 2,5-di-Butylhydroquinone â?¤0.2% Hydroquinone â?¤0.1% Lead â?¤2mg/kg Toluene â?¤0.0025% Ultraviolet Absorbance Pass Melting Range 126.5~128.5 TBHQ use-method Direct method: heat the oil to above 60ï¸?, add into the needed portion of TBHQ, stir the mixture until TBHQ fully dissolved. Seeding method: dissolve TBHQ in a small portion of oil (90°C~120°C) to get oil mixture with 5%~10% TBHQ, then add the mixture into oil directly or with portioning device, stir the final mixture until TBHQ is evenly distributed. Dipping & spraying method: for salted meat, dried fish products, nuts, can directly spray diluted TBHQ solution onto the surface,make flexible use of diluted TBHQ solution for dipping.
Hardware 2*Gigabit Ethernet LAN 1*2.5Gbps Ethernet LAN 1*RJ11 for Voice Dual band WiFi6: IEEE802.11 a/b/g/n/ac 1*Sim Card Slot 1*Power Supply Built-in 3/4/5G Antennas Built-in WiFi Antennas Buttons: Power, WPS, Reset LED Indicators: Power, 5G, 4G, , WiFi, WPS 5G/4G/3G 5G NR: Bands: N2/N5/N12/N41/N66/N71/N77/N78/N79 MIMO 4x4, 256QAM Downlink up to 4Gbps Uplink up to 300Mbps â?? �· LTE: FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B20/B25/B26/B66/B71 TDD: B38/B39/B40/B41/B42/B43/B46/B48 LTE Cat 22 MIMO 4*4, 256QAM Downlink up to 2.4Gbps Uplink up to 200Mbps WCDMA: B1/B2/B4/B5/B8 *The bands could be designed according to the operator bands â?? Dual Band WiFi IEEE802.11 a/b/g/b/ac 2.4Ghz + 5.8GHz MIMO 4X4 Security: Open, WPA-PSK, WPA2-PSK, WPA3-PSK 5G NR to WiFi Throughput: Up to 1Gbps Features Voice VoIP, VoLTE, CSFB IPv4&IPv6 DHCP Server, DHCP Relay, DNS, DDNS NAT, NAPT Routing VPN Passthrough PPTP/L2TP/IPSec Passthrough Data Usage Statistics Firewall: Port Forwarding, DMZ, URL/Domain Blocking, MAC/IP/Port filtering, White/Black List Device Management WEB, TR069 Environment Dimension: 160mm*86mm*215mm Net Weight 600 g Color: Black or White ±8KV ESD Protection Power Supply: 12V/2A Operation Range: -10 to 5 C Humidity:10-90% non-condensing Installation: Desktop
The RapidAir 3/4in. MaxLine compressed air piping system is designed for high-demand air tool users and longer air line runs in large buildings. It features high-density polyethylene (HDPE) tubing with an aluminum core to maintain any hand-bent shape for easy wall installation. 200 PSI operating pressure at 70�°F; 140 PSI at 140�°F. What's Included (3) Outlet kits (2) Tees (1) 3/4in. tubing x 3/4in. male fitting (20) Mounting clips (1) Cutter and deburr tool 100 feet of 3/4in. HDPE/aluminum tubing Features + Benefits Master kit includes:3 outlet kits 2 tees 3/4in. tubing x 3/4in. male fitting 20 mounting clips Cutter and deburr tools 100 feet of 3/4in. HDPE/aluminum core multilayer tubing Tubing dimensions are 0.8in. I.D. x 1in. O.D. Key Specs Item# 20923 Brand RapidAir Manufacturer's Warranty 1 year Limited Warranty Ship Weight 25.0 lbs Coupler Size (in.) 3/4 Max. PSI 200 at 70F Pieces (qty.) 29 More Information Please Visit our website OFFICIAL STORE AGRA-TOOLS for catalog, transaction, full Description, Term and Conditions, best product, or special price.
Your air tools will last longer, have fewer problems and need fewer repairs when you use Ingersoll Rand's high-quality filters, regulators, and lubricators. What's Included (1) Filter (1) Regulator (1) Lubricator Features + Benefits 5 micron filter 1.3 oz. bowl 150 PSI Locking bowls for safety Key Specs Item# 404792 Brand Ingersoll Rand Manufacturer's Warranty 24 months limited parts / No labor Ship Weight 2.55 lbs Application Filter, regulator, lubricator Max. PSI 150 CFM 71 Includes (1) Filter, (1) Regulator, (1) Lubricator More Information Please Visit our website OFFICIAL STORE AGRA-TOOLS for catalog, transaction, full Description, Term and Conditions, best product, or special price.
Top Mounted Air Coolers Product Description: Top-mounted series air cooler mainly used with various condensing units in cold storage warehouses. Top-mounted air coolers has three serious :DL/DD/DJ series.DL series suit for cold room of 0.DD series suit for cold room of -18â??.And DJseries suit for cold room of -23â??. Casing: Utilizing high quality stainless plate and coating processing,anti-corrosion,the appearance is smooth and beautiful. Heat Exchange Coil: The evaporator utilizes thin walled steel tube and aluminum fins after twice processing. The tube has high heat changing efficiency. Corrugated aluminum fins,fin spacing 4mm,6mm and 8mm. Fans: External rotor motor.The motor anti moisture,anti low temperature large air flow,low noise and reliable working.Fan specification 300-500mm,Number from 1 to 4. Electric Defrost The defrosting system is made up of stainless steel tube which is laid in the coil.The defrosting is time saving and effective .
Have a nice day! we are a leading manufacturer in evaporative air cooler for both home/office and industrial use too (from 1000M3/H upto 100000M3/H) we had gained more than 50patents of national invention, utility models and industrial design, our product had passCE, SASO, BV etc, and successfully exported more than 70 countries and regions, including Europe, America, Australia, Japan, Korea, Middle East, Brazil, Southeast Asia, and Africa etc. With years' development, Aolan had grown into a company who occupies the wide international market share, u can view details with link: 3w dot aolan-china dot com for more details. Hope we have a cooperate opportunity in future! Waiting for your early reply.
1 year Place of Origin: Guangdong, China Brand Name: Rawsuns Size: 651*650*220 Car Model: 6~8m pure electric bus Adapted motor power section (KW): 40-80 Product Name: rawsuns electric truck conversion kit Intelligent cooling system Application: 6~8m pure electric bus Dimensions: 651*650*220 Voltage: 12-24V Fan power (W): 300-500
Product name:Air Cooled Chiller Condition:NEW Brand Name:BOBAI Product model:BCA-20 Power Supply:3N-380V/425V 50HZ Product Tank:Air Max temperature control range:5~35 Cooling power:59KW Total input power:18KW Tank:303L Water pump power:2.2KW Water pump head:25M Water pump flow:12.5M^3/H Circulation water pipe diameter Place of Origin:CN;SHG Certification:CE Dimension(L*W*H):2390*910*1460mm Weight:830KG After-sales Service Provided:Field maintenance and repair service Warranty:12 Months, 12 Months
Coldroom Evaporater Chiller Air Cooler
Coldroom Condensing Unit
Coldroom condenser
TI UNIT compact roof top chiller units are manufactured in type of air cooled in capacities of 5 to 360T.R. in one to four circuited configurations. In all TI UNIT compact roof-top chiller units the frames and body are from galvanized steel & stainless steel (316l) (option) the chassis made steel channel in appropriate thicknesses and all of units are completely painted in the proper thickness. Evaporators are high efficiency shell and tube heat exchangers, designed based on TEMA. Condenser of compact rooftop chiller unit made of plated coil, designed based on TEMA. Chillers with plate type heat exchangers are available upon request. TI UNIT compact roof top chillers can be designed to operate with R-22, R-407C and R-134a refrigerants. Safety controls installed on all units include high, oil and low pressure cut-outs, compressor safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat and compressor operation time logger. The above mentioned are all chosen from the most recognized controls manufactures in the air conditioning industry. Automatic condensing temperature control: A controller, factory installed on each unit automatically stages the condenser fans allowing the unit to start. With this controller the condenser fans start stage by stage. Raw materials such as copper tubes, fittings and valves are supplied by well-respected manufacturers. Electrical safety measures such as three phase controller and circuit breakers are, available on all units. A fault detection system for the whole unit is available upon request. Microprocessor based PLC controller is also available as needed. Suitable accessories make the chillers operable in all seasons according to the application requirements without any problems.
TI UNIT screw chillers are manufactured in two types of air cooled and water cooled in capacities from 50 to 560 T.R. in one to four circuited configurations. Evaporators and condenser Chillers with plate type heat exchangers are available upon request. For further related technical information, please send your inquiries to TI UNIT mfg. group. TI UNIT screw chillers can be designed to operate with R-22 and R-134a refrigerants. Bitzer screw compressors suitable for use with R-134a refrigerant are available in two versions (m.vr.1 & m.vr.2) which can be used in the chillers as required. Safety controls installed on all units include high and low pressure cut-outs, compressor oil level control safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat and compressor operation time logger. The above mentioned are all chosen from the most recognized controls manufactures in the air conditioning industry. Compressors are by Bitzer which happens to be one of the best and most reliable brands. Raw materials such as copper tubes, fittings and valves are supplied by well-respected manufactures. Electrical safety measures such as three phase controller and circuit breakers, are available on all units. A fault detection system for the whole unit is available upon request. Microprocessor based PLC controller is also available as needed. TI UNIT screw chillers are also available upon request for industrial applications in both Air Cooled and Water Cooled types; Suitable accessories make the chillers operable in all seasons according to the application requirements without any problems.
TI UNITS Reciprocating Water Chillers are available in two types of air cooled and water cooled in capacity range of 5 to 240 tons of refrigeration and compressor configurations of one to four. Evaporators and condensers are high efficiency shell and tube heat exchangers designed based on TEMA (Tubular Exchanger Manufacturers Association) standards. Safety controls installed on all units include high and low pressure cut-outs, compressor oil pressure safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat. Whatever mentioned above, are all chosen from the most recognized controls manufacturers in the air conditioning industry. Compressors are by DWM COPELAND and BITZER which happens to be one of the best and the most reliable brands. Raw materials such as copper tubes, fittings and valves are supplied by well respected manufactures. Electrical safety measures such as three phase controller and circuit breakers are available on all units. A fault detection system for the whole unit is available upon request. Microprocessor based PLC controller is also available as needed.
In all TI UNIT air handling units the frames are from aluminum profiles while the chassis and body panels are made from galvanized steel sheets in appropriate thicknesses. All units are completely painted in the proper thickness. Blower(S): Double width-double inlet centrifugal fans with forward curved blades are normally used for low pressure drop requirements as opposed to fans with backward curved blades which are for high pressure drop applications. Fans and housings are made of galvanized steel each set off a plus other related components such as shafts are statically and dynamically balanced, shafts are selected from proper material and size. Other power transmission components such as pulleys and belts are also suit ably chosen depending on the required fan speed and electric motor power. Fan(s) and the corresponding electric motor(s) are installed on an independent chassis which is itself installed on the main chassis using vibration dampers in order to eliminate transfer of vibrations to the structure. To further reduce the effects of vibrations, fan outlet (s) are also connected to the structure via flexible material such as canvous. All 380V/3/50Hz electric motors are selected with insulation class of (f) and ingress protection of (IP- 54). Electric motors with ingress protection of (IP- 55) are also available upon request. Coil (S): Cooling and heating coils or either one of the two depending on the Requirement May be installed. Cooling coils are available in two, types of chilled water and direct expansion (D.X.) as per clients requirements. The chilled water coils are constructed of 5/8 O.D copper tubes plate finned (8, 10, 12 or 14 FPI) in aluminum or copper upon request. The D.X. Coils are constructed of 3/8 OD copper tubes also plate finned (10, 12 or 14 FPI) in aluminum or copper as required. The chilled water for cooling coils in to be supplied by a water chiller and in the D.X. coils cooling is provided through the use of refrigerant such as R-22, R-407c or R-134a. Chilled water coils may be requested in 4 or 6 rows and as to the D.X. coils, they are available in 4 or 6 row configurations. Heating coils are available in two types of hot water and steam. The hot water coil similar to chilled water coil is offered in 1 or 2 row configurations. Steam heating coils are constructed of 1/2 seamless steel pipe spiral finned in aluminum or copper. Coils in 1 & 2 -row configurations are available upon request. Mixing box: Fresh and return air streams are mixed in the mixing box .An independent air damper is included for each air stream. Air Dampers are manufactured from aluminum in opposed blade configuration and are air sealed through the use of rubber strip gasket. Damper actuators ma y be easily installed when required. Washable aluminum filter modules 2 inches in thickness are arranged in (V) type configuration inside these boxes. Housing for
size: od38, id18, h1.5mm(tolerance pls contact us for sure) shape: donut, ring(do you want to see photo?) application: baby milk warming cup (portable warming cup) sample: available This is a hot model,many companies are developing the warming cup with this heater!
Wall mounted stands for air conditoner
