TI UNIT screw chillers are manufactured in two types of air cooled and water cooled in capacities from 50 to 560 T.R. in one to four circuited configurations. Evaporators and condenser Chillers with plate type heat exchangers are available upon request. For further related technical information, please send your inquiries to TI UNIT mfg. group.
TI UNIT screw chillers can be designed to operate with R-22 and R-134a refrigerants. Bitzer screw compressors suitable for use with R-134a refrigerant are available in two versions (m.vr.1 & m.vr.2) which can be used in the chillers as required.
Safety controls installed on all units include high and low pressure cut-outs, compressor oil level control safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat and compressor operation time logger. The above mentioned are all chosen from the most recognized controls manufactures in the air conditioning industry. Compressors are by Bitzer which happens to be one of the best and most reliable brands. Raw materials such as copper tubes, fittings and valves are supplied by well-respected manufactures. Electrical safety measures such as three phase controller and circuit breakers, are available on all units.
A fault detection system for the whole unit is available upon request. Microprocessor based PLC controller is also available as needed.
TI UNIT screw chillers are also available upon request for industrial applications in both Air Cooled and Water Cooled types; Suitable accessories make the chillers operable in all seasons according to the application requirements without any problems.
As a leading water-cooled screw chiller manufacturer with almost 20 years of experience since 2003, TopChiller provides a complete range of water-cooled screw chiller from TPWS-WSH series. The cooling capacity of screw water chiller is from 30Ton to 480Ton/105KW to 1688KW and the chiller temperature control range from +30 to -30. Besides the standard water-cooled screw chiller control temperature from 7 to 30, TopChiller also has a water-cooled glycol screw chiller control temperature below zero from 0 to -30 for some special industrial applications. With 20 years experience in design and manufacturing water-cooled screw chiller from TopChiller has the following features: Using famous brand Semi-hermetic Screw Compressor- Bitzer from Germany and Handbell from Taiwan. Each screw compressor comes with 4 steps of energy control 0-25%-50%-75%-100% to make sure the whole screw chiller operates when stable with high refrigeration performance. Each water-cooled screw chiller with high-efficiency shell and tube type heat exchanger and aluminum foil with a copper tube air cooled condenser.
As a leading air cooled screw chiller supplier, TopChiller provides a complete range of air-cooled screw chiller from TPAS-ASH series, with cooling capacity from 40Ton to 580Ton/130KW to 1950KW and the chiller temperature control range is +30 to -30. Besides the standard air-cooled screw chiller control temperature of 7 to 30, TopChiller also has air-cooled glycol screw chiller control temperature below zero from 0 to -30. Each air cooled screw chiller designed from TopChiller has the following features: Using world famous brand semi-hermetic screw compressor- Bitzer from Germany and Handbell from Taiwan. Each screw compressor with 4 steps of energy control 25%-50%-75%-100% to make sure the whole screw chiller is stable and guarantee high refrigeration performance. There are also 2 or 3 compressors for optional depends on the required refrigeration capacity. Highly efficient closed loop shell and tube type heat exchanger as the evaporator, and using air cooled type condenser-Copper tube sleeve aluminum fin with big volume air cooling fan.
As a leading air cooled screw chiller supplier, TopChiller provides a complete range of air-cooled screw chiller from TPAS-ASH series, with cooling capacity from 40Ton to 580Ton/130KW to 1950KW and the chiller temperature control range is +30 to -30. Besides the standard air-cooled screw chiller control temperature of 7 to 30, TopChiller also has air-cooled glycol screw chiller control temperature below zero from 0 to -30. Each air cooled screw chiller designed from TopChiller has the following features: Using world famous brand semi-hermetic screw compressor- Bitzer from Germany and Handbell from Taiwan. Each screw compressor with 4 steps of energy control 25%-50%-75%-100% to make sure the whole screw chiller is stable and guarantee high refrigeration performance. There are also 2 or 3 compressors for optional depends on the required refrigeration capacity. Highly efficient closed loop shell and tube type heat exchanger as the evaporator, and using air cooled type condenser-Copper tube sleeve aluminum fin with big volume air cooling fan.
Hero-tech air cooled screw chiller Application Industrial plc centralized control combined with compressor capacity control system, precisely monitor. Ry, saving installation time and cost. W shape aluminum fin type condenser, assuring adequate heat exchanging area within smaller unit size High efficient evaporator with internal thread copper tube. Large air volume axial fan with metal blades. Motor separated from net-cover, fixed on exhaust port by metal Siemens plc control, lcd touch screen interface. Standard design charged r22, cfc free r407c, r410a, r404a, r134a for option. 380v-415v/50hz 3ph for standard design. Different design on customers' request. Standard export wooden case
Screw type water cooled chiller system i-hermetic screw compressor. The latest 5 to 6 patented screw rotor profile with excellent efficiency. Adjustable infinite or closely stepped capacity control, features energy efficient, stable and quiet running. Most advanced patented highest precision manufacturing process. Built-in full intelligent monitoring and protection including thermal motor temperature monitoring, phase sequence monitoring, manual reset lock-out, oil temperature sensor. Wide range of refrigerant for option, including r134a, r407c and r22(r404a, r507c upon request). Microprogramming control system Industrial plc centralized control combined with compressor capacity control system, precisely monitor. Integrated protection for low temperature, high/low pressure, anti-freezing, phase missing, anti-phase, overload, motor over temperature, oil differential, flow switch, start up latency. Optional operation language, menu leading, unit running state easy to adjust. Easy installation, reliable running Closely stepped start-up, minimize impact to electricity. Steady and safe running, low vibration, easy for installation. Compact structure, less space demand and light in weight, easy for transport and installation. Completely wired, inspected and tested pre-delivery, saving installation time and cost. Standard export wooden case
Evaporative Screw Chiller is also referred to as an Energy-saver chiller with an overall efficiency ratio of 40%~60% when compared to an air-cooled unit the water-cooled unit ratio is about 25%~30%. Bid bye to configuring the cooling tower with this chiller. This feature allows it to save more than 50% of water. Moreover, our reasonable and simple machine is a type of practical novel refrigeration with water equipment. Key Features: Programable Multi compressor combination Premium quality compressor rack. Asymmetric screw compressor. Tubular DX evaporator. Copper Tube Efficient heat exchange. Stable operation. Less noise. Enhanced performance Industrial appearance. Wide temperature spectrum. Ultimate power saver Easy to use. Compact design and dimensions. Power supply: 380V/3PH/50Hz
Air-Cooled Screw Chiller Screw semi-hermetic compressor, to serve the needs of the equipment or technics cooling each industry. and supply frozen water to central air-conditioning system. Shell and tube or plate type heat exchanger, with tight structure and small occupation area. Can select single or more units to modular, modular can include 2-4 units, having greater refrigerating capacity, standby each, interval running. Microcomputer or plc control. Can select heat reclamation device. Dispense with cooling tower and cooling water pump, convenient install. Temperature control range:3 -30 Refrigerated capacity:115KW - 636KW (50HP-240HP). Special Industrial Chiller for Industry For CNC Machine For Pharmaceutical Industry For Plastic Uptake Industry For Plastic Mould Industry For CD-ROM Manufacturing Industry For Chemical Coating Industry For Packaging and Printing Machine For Laser Cutting Equipment For Laboratory Equipment For Electrical Discharge Machine For Textile Manufacturing For Electroplating Industry For Food Industry For Leather Industry For Floor Glue Industry For Leatherette Industry For Concrete Industry For Polyurethane Industry For Die-casting Machine For Cosmetics and Commodity Industry For Optoelectronic Industry
Low-Temperature Screw Chiller To serve the needs of the equipment or technics low temperature cooling each industry. Shell and tube type heat exchanger, tight structure. Can select single or more units to modular, modular can include 2-4 units, having greater refrigerating capacity, standby each, interval running. Microcomputer or plc control. Can select heat reclamation device. Temperature control range: -35 -5 Refrigerated capacity:115KW - 636KW (50HP-240HP). Special Industrial Chiller for Industry For CNC Machine For Pharmaceutical Industry For Plastic Uptake Industry For Plastic Mould Industry For CD-ROM Manufacturing Industry For Chemical Coating Industry For Packaging and Printing Machine For Laser Cutting Equipment For Laboratory Equipment For Electrical Discharge Machine For Textile Manufacturing For Electroplating Industry For Food Industry For Leather Industry For Floor Glue Industry For Leatherette Industry For Concrete Industry For Polyurethane Industry For Die-casting Machine For Cosmetics and Commodity Industry For Optoelectronic Industry
This Flooded Water-Cooled Screw Chiller has a compact structure which makes it easy to install and maintain. It is equipped with several smart features, for instance, intelligent control which helps it to maintain energy efficiency at any instant. Furthermore, it has an evaporator with full liquid design. Not only it takes a microcomputer control system, but it also has a fault diagnosis. Looking for a Chiller which has reliable functioning and remarkable performance, then look no more this Chiller is your right answer. Key Features: Advanced 5:6 tooth ratio Multi-level or stepless energy settings Smart control Strong security protection Fault diagnosis Automatic adaptation Level sensor Low noise Efficient unit Power supply: 380V/3PH/50Hz Applications: Our Flooded Water-Cooled Screw Chillers has a vast range of applications in several sectors from food to plastics. It also ensures that your requirements are met by it.
