Feature :
Digital Temprature Controller
Work In 55 Degree Ambiant Temprature.
Nano Chemical Coating To Protect Copper Tubes
High Air Flow To Cover Large Panel.
Specialy Desighned For Control Panel Rooms.
Ind. Exhaust Fan In Condenssor Unit.
North Pole panel airconditioners are designed to cool and to dehumidify the internal environment of cabinets and enclosure which are use to hold electronic components, thus assuring a cool, clean atmosphear for reasons of optimum proformance and longevity. hot air inside the electronic cabinet or enclosure is drawn in to the return air plenum of the panel cooler by the eveporator exhast fan located in upper section of the panel airconditioner. This air is drawn through the eveporator coil, cooled and discharged back through the cold air outlet in to the cabinet or enclosure. Any moisture in this air condenses on the eveporator coil coolect in the condenset tray and is discharged to the outside via the condensate drain tube which projects out at side.
Feature :
Digital Temprature Controller
Work In 55 Degree Ambiant Temprature.
Nano Chemical Coating To Protect Copper Tubes
High Air Flow To Cover Large Panel.
Specialy Desighned Product For Textile Atmospheare.
This LGJ-50FD Electric Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Freezing and drying process of LGJ-50FD (electric heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves and comes with u-disc extraction function for users to observe the lyophilization process of materials.
LGJ-30FY Top Press Type Silicon Oil Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Freezing and drying process of LGJ-30F (silicon oil heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves and comes with u-disc extraction function for users to observe the lyophilization process of materials.
3413 Heating Air Conditioner Ventilation Suppliers
Short on time? Let Heating Air Conditioner Ventilation sellers contact you.
Refrigerant R410 is a kind of refrigerant of surroundings-protection model, as the long-term substitute for the R22 and R502ï¼?R404A used in refriger anting systems of low & moderate temperature. It has features of cleaning, low poison, non-combustion, good-refrigeration, and so on, and is greatly used in air-conditioner.
1. Material: Polypropylene (PP-R) & Blue
2. Collector pipe size: 20*2.0 mm
3. Capillary tube size: 4.3*0.8 mm
4. Spacing of Capillary tubes: 10mm, 20mm, 40mm,
5. Width: 1000mm
6. Connection method: Connect mats to another and to the water circuit by means of thermal welding.
7. Test pressure in production: 20 bar
8. Recommended operating pressure: 4 bar
9. Max allow heating water temp: +60
10. Optimal input temp. For heating: +28~32
11. Optimal input temp. For cooling: +16~18
12. Type of delivery: The mats are supplied rolled-up, packed in cartons
It's an energy-efficient, low-temperature heating and high-temperature cooling system.
It is made of Polypropylene. It consists of the multitude, parallel plastic tubes with diameter of only 4.3mm and two collection pipes.
The mats can be connected to different heat energy carrier (heat pump, gas boiler, central heating, solar energy) that is circulating at an efficient temperature.
This LGJ-50FY Top Press Type Silicon Oil Heating Freeze Dryer is widely used in medicine, pharmacy, biology , chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
This model is not only suitable for the freeze drying of bulk (liquid, pasty, solid) conventional materials, but also suitable for the drying of the vials materials. When the materials are ready for freeze-drying, they are put into in the vial, then begin freeze drying before the vial's lid unsealed. The capping device compacts the vials' lids after freeze drying to prevent secondary pollution, re-adsorb water, and facilitate long-term storage.
Brief introduction of the Silicon Oil Heating Freeze Dryer
This LGJ-100F Standard Type Pilot Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Optional accessories and functions of the Silicon Oil Heating Freeze Dryer
eutectic point tester
freeze drying finished judgement function
imported vacuum pump
vacuum pump anti-returned oil device
oil mist filter system
Vacuum adjustment system
LYO-MEGA Software System
·Mobile phone APP monitoring system
data recorder
backfill filter
Automatic backfill and drainage control system
This LG-50 Food Type Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Features of the LG-50 Food Type Freeze Dryer
The drying curve optimization control algorithm can control the heating rate and vacuum value in the drying stage.
The patented gas diversion design and control technology have the strong ice catching ability and high drying efficiency.
Industrial-grade embedded touch screen + dedicated SH-HPSC-III modular controller, the system is stable and reliable, with high control accuracy.
The professionally designed FD-MANAGER control system can save multiple sets of process recipes, and can adjust the process in real time during the drying process to improve the process optimization rate.
Flexible manual + automatic control mode, manual groping process, and automatic batch production.
Accurate sensor calibration function ensures the accuracy of long-term use of process parameters.
Setting user level and password, and decentralizing operations and management.
Optional powerful LYO-MEGA main unit control system can record, save up to ten years of operating data, curves and alarm records, improve product trace ability; at the same time convenient observation, operation and fault diagnosis.
Non-standard freeze dryers can be customized as requested.
Freezing and drying process of LGJ-100F (silicon oil heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves for users to observe the lyophilization process of materials.ã??
ã??
This model is not only suitable for the freeze drying of bulk (liquid, pasty, solid) conventional materials, but also suitable for the drying of the vials materials. When the materials are ready for freeze-drying, they are put into in the vial, then begin freeze drying before the vial's lid unsealed. The capping device compacts the vials' lids after freeze drying to prevent secondary pollution, re-adsorb water, and facilitate long-term storage.
This LGJ-18 Multi Manifold Type Vacuum Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered. It is a kind of the small vertical freeze-drying unit with shelf heating and programmable functions.
Features of the LGJ-18 Multi Manifold Type Vacuum Freeze Dryer
With sample pre-frozen function, large cold trap opening, no inner coil,and low temperature refrigerator is needless.
Patented gas diversion technology, and strong ice holding ability.
World- known brand compressors, high efficiency, long life, low noise.
Well-known brand vacuum pump with a high pumping speed to achieve a higher ultimate vacuum.
Vacuum pump protection function can set the cold trap temperature to protect the vacuum pump life.
Applications of the LGJ-18 Multi Manifold Type Vacuum Freeze Dryer
Suitable for freeze-drying of bulk liquid, pasty, solid conventional materials. It can be equipped with a flask outside the drying chamber to dry the frozen material on the inner wall of the bottle. At this time, the flask is connected to the manifold as a container. The material in the flask is heated by room temperature, and the multi-manifold switch can be used to remove or install the flask at any time without downtime.
The LGJ-12 Standard /Top-Press Type Vacuum Freeze Dryer widely used in medicine, pharmacy, biology research, chemical industry and food production,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.LGJ-12 is suitable for experiment in laboratory or small quantity of production. It can meet the regular freeze drying requirments of the most laboratory.
Features of the LGJ-12 Standard /Top-Press Type Vacuum Freeze Dryer
. All-in-one structure , small size, no external flange, easy to use, no leakage.
. All materials in contact with the product use inert materials to meet the requirements of the GLP.
. The cold trap and console are made of stainless steel, which is anti-corrosion and easy to clean.
. All stainless steel inflated /water release valve is designed and produced by our company, which is safety, anti- corrosion, no leakage.
. With sample pre-frozen function, large cold trap opening, no inner coil,and low temperature refrigerator is needless.
. Patented gas diversion technology, and strong ice holding ability.
Material: Warp proof self-extinguishing UL approved PVC, 94V-0 flammability rating.
Color: Grey,White,Blue,Black Certificates:ROHS,CE
These devices are for routing of wires within devices in factory installations.
Features parallel holes on both sidewalls to facilitate cutting in wire application.
Special color, size, length upon request of reasonable quantity.
Applications of the LG-5 Food Type Freeze Dryer for sale
This LG-5 Food Type Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc.
Features of the LG-5 Food Type Freeze Dryer
Pre-freezing and drying of separate structures are performed at the same time, which improves the freeze-drying efficiency and shortens the freeze-drying time.
Space alloy separator material, double-sided radiation heating, emissivity above 90%, good temperature uniformity.
Highly efficient mixed refrigerant medium, lower freezing point and higher boiling point, high heat exchange efficiency and long service life.
The drying curve optimization control algorithm can control the heating rate and vacuum value in the drying stage.
The patented gas diversion design and control technology have the strong ice catching ability and high drying efficiency.
Industrial-grade embedded touch screen + dedicated SH-HPSC-III modular controller, the system is stable and reliable, with high control accuracy.
The professionally designed FD-MANAGER control system can save multiple sets of process recipes, and can adjust the process in real time during the drying process to improve the process optimization rate.
Flexible manual + automatic control mode, manual groping process, and automatic batch production.
Accurate sensor calibration function ensures the accuracy of long-term use of process parameters.
Setting user level and password, and decentralizing operations and management.
Optional powerful LYO-MEGA main unit control system can record, save up to ten years of operating data, curves and alarm records, improve product trace ability; at the same time convenient observation, operation and fault diagnosis.
Non-standard freeze dryers can be customized as requested.
Technical Specification 18 " Aluminum Air Ventilator (Bush Type)
Model Standard Model Standard
Diameter 24 " (609.6 mm) Pointer MOC 9.5 mm Ã?? EN-8 with Electroplating
Neck / Throat Diamter 18 Inch (457.2 mm) Supporting Bush MOC Green Oilon
No. of Vanes (Blades) 30 Vanes Center Shaft M S 19 mm Ã?? with Nickle Plating
Height 18 Inch (457.2 mm) Inner Arms (Pipe) M S with Electroplating
Base Ring Stainless Steel (Jindal Make) Outer Arms M S with Electroplating
Top Cover Stainless Steel (Jindal Make) Center Pipe M S 32 mm with length 240 with Electroplating
Top Sheet MOC Aluminum 1.2 mm Thickness NetWeight 5.0 Kgs (Approx.)
Vanes MOC Aluminum 0.5 mm Thickness (Hindalco Make) Packing As per Box Packing (Box wt. 2 Kg Approx)
Bottom Ring Aluminum OR SS- 304, 1.5 mm Thickness (Hindalco Make) Vanes Size 435 / 70
Rotation Bush Support with Green Oilon Miscellaneous items like Nut, Bolt, Washer, etc. M S with Electroplating or Zinc Plating or Galvanized
Technical Specification 35 "/ 36 " Aluminum Air Ventilator
Model Standard Model Standard
Diameter 42 " (965.2 mm) Pointer MOC 9.5 mm Ã?? EN-8 with Electroplating
Neck / Throat Diamter 35 " (900 mm) Supporting Bush MOC Green Oilon
No. of Vanes (Blades) 48 Vanes Center Shaft MS 19 mm Ã?? with Nickleplating
Height 19.5 Inch (487.5 mm) Inner Arms (Pipe) MS with Electroplating
Base Ring Stainless Steel (Jindal Make) Outer Arms MS with Electroplating
Top Cover Stainless Steel (Jindal Make) Center Pipe MS 32 mm with length 290 Electroplating (30 mm Nut)
Top Sheet MOC Aluminum 1.2 mm Thickness NetWeight 14.2 Kgs (Approx.)
Vanes MOC Aluminum 0.5 mm Thickness (Hindalco Make) Packing As per Box Packing
Bottom Ring Aluminum 1.5 mm Thickness, C-Channel, (Hindalco Make) Vanes Size 435 / 70
Rotation Bush Support with Green Oilon Miscellaneous items like Nut, Bolt, Washer, etc. MS with Electroplating or Zinc Plating Galvanized
Technical Specification 35 "/ 36 " Aluminum Air Ventilator
Model Standard Model Standard
Diameter 42 " (965.2 mm) Pointer MOC 9.5 mm Ã?? EN-8 with Electroplating
Neck / Throat Diamter 35 " (900 mm) Supporting Bush MOC Green Oilon
No. of Vanes (Blades) 48 Vanes Center Shaft MS 19 mm Ã?? with Nickleplating
Height 19.5 Inch (487.5 mm) Inner Arms (Pipe) MS with Electroplating
Base Ring Stainless Steel (Jindal Make) Outer Arms MS with Electroplating
Top Cover Stainless Steel (Jindal Make) Center Pipe MS 32 mm with length 290 Electroplating (30 mm Nut)
Top Sheet MOC Aluminum 1.2 mm Thickness NetWeight 14.2 Kgs (Approx.)
Vanes MOC Aluminum 0.5 mm Thickness (Hindalco Make) Packing As per Box Packing
Bottom Ring Aluminum 1.5 mm Thickness, C-Channel, (Hindalco Make) Vanes Size 435 / 70
Rotation Bush Support with Green Oilon Miscellaneous items like Nut, Bolt, Washer, etc. MS with Electroplating or Zinc Plating Galvanized
3413 Heating Air Conditioner Ventilation Suppliers
Short on time? Let Heating Air Conditioner Ventilation sellers contact you.
