Kerosene heater wkh-4400 Measurement 46.0*46.0*60.0cm N.W./g.W. 10.5/12.0kgs Tank capacity 7.5l Fuel consumption(l/hr) 0.53l/hr Heater output 18500btu/hr Continues heating duration 9-12hr Tank system Single Chimney type Glass Ignition type Ecectronic ignition Container capacity 224pcs/20ft, 500pcs/40hq Other details Adjustable thermostat, tip-over protection
Kerosene heater Ksp-229 Measurement 32.0*32.0*46.0cm N.W./g.W. 4.0/4.8kgs Tank capacity 4.5l Fuel consumption(l/hr) 0.24-0.28l/hr Heater output 7600-8900btu/hr Continues heating duration 17-18hr Tank system Double Chimney type Metal Ignition type Match Container capacity 595pcs/20ft, 1434pcs/40hq Other details Adjustable thermostat
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20¡ã/30¡ã/40¡ã/45¡ã. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20¡ã/30¡ã/40¡ã/45¡ã. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20;/30;/40;/45;. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20;/30;/40;/45;. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
Our main product is solar water heater, solar project, has laser welding, automatic punching and vacuum sputtering equipment to strictly control the product quality. Main high and core technology is blue coating flat collector, which is advanced worlwide.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20¡ã/30¡ã/40¡ã/45¡ã. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, woodcase for sample
2people 1200*1050*1900(mm) 1700w Heater : 8pcs 1.Canadian hemlock 2.MP3/USB/FM 3.LOW EMF heater 4.Digital control panel 5.oxygen ionizer 6. readinglight &LED light 7.Temperature 18-60 Centidegree 8.Time: 0-60 minutes 9.Automatic alarm function 10. Cup holder 11.Towel bracket 12.Magazine bracket 13.Tempered glass door 14. Shandle 15 Aromatherapy
Adjust sensitive, stable and reliable, easy to maintain. Automatic control, can reduce the labor intensity, easy to install
Bontel Advantages: 1.The high weather-proof selective absorbing film from full-automatic magnetron sputtering production line developed by Bontel; 2.With Bonding heat transferring technology and laser welding technology; 3.High quality low-iron tempered glass with surface treatment to get high transmittance and low emittance; 4.Circulation fluid in closed copper pipes, no glass tubes. So collectors without corrosion and circulation fluid leaking; 5.The solid built-in absorber plate can absorb all solar radiation improve working efficiency and integrated well with buildings.
It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 5 pieces of vacuum tubes as one unit. Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C.
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 4 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 3 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Product Description: Longpu solar vacuum tube adopts interference solar absorption layer and unique three-target magnetron sputtering coating technology.Even at high temperatures of 400 degrees,the metal ions in the film will not be lost,and its strong endurance greatly prolongs its life. Features: 1 Outer Diameter of tube : 125mm,137mm 2 Thickness of tube: 3.0mm 3 Length of tube : 566/600/700/850/1860/2160mm 4 Application:solar cooker,solar water heater ,solar collector. The tube size can be customized according to customers. the tube can be used for solar cooker, tankless solar water heater, indoor heating, and solar collector on residential, commercial and industrial. For air shipment,cartons are mostly used . For sea shipment,only cartons are used if it's a full container. If it's a FCL ,we will use cartons+ wooden case according to the order.
BSEN 12975 & BSEN 12976 Certified, Dubai Municipality Approved, Abu Dhabi QCC Approved, Bahrain Ministry Of works Approved. Flat Type Collector based and ETC Collector Based Thermosiphon Systems Drain Back Systems Forced Type Solar Water heaters Pressurised and Non-Pressurized Solar Water heaters Capacities start from 100LPD (Liters per Day) to any commercial capacities
Evacuated Tube Collector-based Solar Water Heater
Solar products, solar appliances, home appliances, electric appliances, lithium battery, gel battery, hybrid inverter, solar lights, solar accessories, solar fan, power inverter, electric cooker, led tv, solar power station.
Agricultural products like pomegranates, bananas, mangoes, pineapple, g4 green chilly, onion, drumsticks, fresh ginger, green lemon, fresh turmeric, suran ( elephant yam), red pumpkin, yellow corn, rice, chickpeas, peanut, green millet , chana dal, roasted grams, raisins, sorghum seeds, asaliya seeds, ceramic products, solar panels, Jaggery, Jaggery powder.
Solar Water Heater.
