Inner tank: Food Grade Stainless Steel by argon protect welding, supply water quality and drinkable Outer shell: Galvanized Steel coated uncorrosion layer Heat insulation layer: 50-60mm import polyurethane integral foaming Frame: Galvanized Steel coated uncorrsion layer, both install inclined and flat roof. High Pressure Cold Water In: 6 bar cold water to tank from Feeder or Electric Auto Valve. Automatic Heating Element free 1% spare parts are free 5 years quality warranty All install documents are free Export Cartons
1) inner tank:stainless steel sus304-0.5mm 2) vacuum tube:qb-al-n/al-47-1500/58-1800 3) outer tank:stainless steel sus304 4) insulation:polyurethane 50mm/60mm 5) frame:stainless steel bar 1.2mm 6) reflector:stainless steel
1) this type of solar water heater works with high pressure, so do the water it prodeces. 2) it uses the heat pipe to delivery the heat energy, it can works rapidly 3) because of no water in the vacuum tube, so there will not tube breakage in the winter 4) each vacuum tubes can work alone, so it can still operate in the event of occasional tube breakage 5) inner tank:macromolecule 6) vacuum tube:al-n/al47-1500/58-1800 7) outer tank:sus304-2b 8) reflector:aluminum component/stainless steel
KES58 Vacuum tube: 58x1800mm Inner tank: Stainless Steel 304 2B food grade Outer tank: Aluminum Galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: Aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 tubes with capacity 135L up to 325L Note: 1. with heater exchanger 12mm,max.pressurized 8bar; 2.state water supply direct enter into the inlet water hole, go through the heat exchanger hot water come out from the outlet water hole; 3.the air vent hole can connected with central heat supply pipe to heat the tank wate
Ke58s Vacuum tube: 58x1800mm Inner tank: stainless steel 304 2b food grade Outer tank: aluminum galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 Tubes with capacity 135l up to 325l In cartons
Ke58a Vacuum tube: 58x1800mm Inner tank: stainless steel 304 2b food grade Outer tank: aluminum galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: aluminum with anti-oxidation treatment Insulation: 50~60mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 Tubes with capacity 135l up to 325l
KE47S Vacuum tube: 47x1500mm Inner tank: Stainless Steel 304 2B food grade Outer tank: Stainless Steel 304 BA Outer tank dia.420mm Frame: Stainless Steel Insulation: 50mm polyurethane total forming with pressure and high density Available sizes: 18, 20, 22, 24, 28, 30, 36 tubes with tank capacity 117L up to 230L
KE47A Vacuum tube: 47x1500mm Inner tank: Stainless Steel 304 2B food grade Outer tank: Aluminum Galvanized sheet with metal painting Outer tank dia.420mm Frame: Aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and high density Available sizes: 18, 20, 22, 24, 28, 30, 36 tubes with tank capacity 117L up to 230L
Specification of seperated pressurized solar water heater: 1) solar collector frame: aluminum alloy 2) inner tank: porcelain enamel 3) outer tank: color-painted steel 4) insulation: polyurethane- 40mm-40%kg/m3 4) cold resistance: -50 centigrade in alpine region 5) hail resistance: 25mm 6) auxiliary electric heater: included 7) size: 58x1800 100l-500l Various
Our company is experienced in offering oem service to different customers from many countries. We can produce any solar water heater according to your detailed specifications. All enquiries are welcome. Can be as the order
Solar water heater Features: 1) stable and reliable performance and well wind resistance 2) vacuum heat-collecting tubes at high temperature 3) dual-purpose brackets for both flat and inclined roof 4) meeting the demand of well-to-do families 5) economical goods Specifications: 1) thickness of bracket: 1.5mm 2) heat-pipe vacuum tube: 47 mm x 1.5m 3) inner tank: sus304-2b food grade stainless steel 4) outer tank: steel (spray-paint and looks like china paint) 5) capacity: 98/110/130/150/180/210/240/300/300l 6) insulating layer thickness: 55 - 60mm 7) inner tank thickness of: 0.4 - 0.5mm 8) tank diameter: 460mm 9) pressure: 0pa 10) heat preservation: 72hrs 11) hail resistance: 25mm
Material and major element of solar water heater: 1. Inner water tank: sus304-2b stainless steel /0.5mm thick 2. Outer water tank: white plate /0.4mm thick 3. Bracket: sus430 stainless steel /1.2mm and 1.5mm thick 4.Solar vacuum tube: A) size: 47 x 1, 500mm / 58 x 1, 800mm B) qty: 15 /18 / 20 / 24 / 30 pcs 5.Temperature insulation layer; 5.5cm imported polyurethane, keep same temperature and high pressure foam 6.Tank diameter:460 mm
The characteristic of heat pipe collector 1) the water is heated by the heat pipe rapidly. 2) there is no water in the vacuum tube, so the tube will not break in the winter. 3) it can be combined with the architecture perfectly. 4) it can be combined with existing pipeline. 5) it will be affected by the local water quality, it doesn't suit hard water. 6) it can be still operate in the event of occasional tube breakages.
Features: 1) The design of this type uses the all-glass evacuated solar collector tubes as the heat-absorb element. 2) Easy plug-in installation 3) Outer tank material: stainless steel plate or powder coated color steel sheet Key specification: 1) Inner tank: stainless steel SUS304-0.4mm 2) Vacuum tube: Ñ+47 x 1,500mm, Ñ+58 x 1,800mm 3) Tank diameter: 410mm, 460mm, 490mm 3) Outer tank: colored steel-0.4mm 4) Insulation: polyurethane 50mm-60mm 5) Frame: coated galvanized steel-1.5mm/stainless steel-1.5mm Type Area( º¦ ) Vacuum tube Volume(liters) Gross wet(kg) 20GP/40GP/40HC loading Qty(sets) ¿¬(mm) Length(mm) Qty(pcs) LC47/1500-15 1.87 47 1500 15 80 53 56/118/134 LC47/1500-15 1.87 47 1500 15 110 55 52/114/128 LC47/1500-18 2.25 47 1500 18 100 60 48/104/118 LC47/1500-18 2.25 47 1500 18 150 65 40/88/100 LC47/1500-20 2.50 47 1500 20 110 67 45/96/108 LC47/1500-20 2.50 47 1500 20 165 72 38/80/92 LC47/1500-24 3.00 47 1500 24 130 75 38/84/96 LC47/1500-24 3.00 47 1500 24 200 80 34/70/78 LC47/1500-30 3.75 47 1500 30 160 85 34/70/78 LC47/1500-30 3.75 47 1500 30 245 91 30/64/68 LC47/1500-36 4.50 47 1500 36 195 98 28/61/70 LC47/1500-36 4.50 47 1500 36 300 105 26/54/60 LC58/1800-12 2.24 58 1800 18 100 45 48/100/116 LC58/1800-14 2.60 58 1800 14 120 50 42/88/100 LC58/1800-16 3.00 58 1800 16 140 58 38/78/84 LC58/1800-18 3.40 58 1800 18 160 65 36/76/80 LC58/1800-20 3.70 58 1800 20 180 70 32/68/72 LC58/1800-24 4.50 58 1800 24 220 78 26/56/20 LC58/1800-30 5.60 58 1800 30 280 95 22/46/52
Sunstar high pressure stand alone model is a new type of solar water heater which adopts advanced heat pipe and all glass vacuum tube technology. Highly efficient vacuum tube absorbs heat from sunlight and heat pipe transfers heat to the condenser end of itself. Condensor indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The available size of the tank ranges from 150l to 250l.
Thermosyphon solar water heater relies on the natural circulation of water between the collector and the tank or heat exchanger. As water in the vacuum tubes is heated it rises naturally into the tank, while cooler water in the tank flows down to the bottom of the vacuum tubes, causing circulation throughout the system. Technical specificationa *Both of inner and outside water tank shell are made of SUS3042B food grade stainless steel plates, welded by argon arc. Water is pure and drinkable. *Heat insulation of water tanks adopts polyurethane foam, thickness is 55mm. *Silicon rings to connect and seal them. *The tubes and supports are adjustable, power bearing is average, and can assure the vacuum tubes to use for long time. *Whole glass vacuum tubes adopt super hard borax and silica glass. *Absorb rate:=93%, thermal radiation rate:=6%(100 íµ) *Resist 25mm hail, using life can last 15 years. *Temperature when exposed to sun without water:250íµ, 2.5hours to boiling if using single tube. *If you use electrical appliances to aid heating, to switch off the power supple before boiling. *To test the water temperature before using, in order to avoid scalding.
Oil heater Series from 5 to 15 fins Maximum power from 1, 000 to 2, 500w 3 heat settings Adjustable thermostat control Triple overheat protection Operation switches with indicator light Pressure tested for safety Smooth castors for easy moment With 24 hours programmable timer Colour carton
Jyothi solar equipments pvt. Ltd. Technical specifications Technical specifications for flat plate collector- 1. Absorber sheet : copper 34 swg thick selectively coated 2. Riser : copper 12.7 ° ¦ 0.5mm 24 swg 3. Header : copper 25.4 ° ¦ 0.5mm 22 swg 4. Bonding between riser : brazing & header 5. Bonding between riser : high temperature soldering / ultrasonic welding & absorber sheet 6. Absorber coating : selective coating of abosorbity > 0.92emmissivity < 0.20 7. Front glazing : toughened glass 4mm thick 8. Gasket : neophrene / epdm 9. Back / side insulation : rockwool / puf 10. Collector box : aluminium [solar section] 11. Collector stands : m.S. (mild steel) 12. Storage tank : stainless steel [s.S.304] 13. Insulation : rockwool (puf) 14. Outer cladding : aluminium / stainless steel [s.S.304] Solar water heater is based on the principle of black body absorption and thermosyphon principle. Overhead tank minimum height Technical specifications for evacuated tube collector- Technical details : 1. Tube material : special borosilicate glass 2. Outer tube diameter : 47 mm 3. Inner tube diameter : 37 mm with selective absorption coating layer 4. Storage tank : ss stainless steel 5. Outer clading : ss / al / pc 6. Support structure : m. S. Powder coated 7. Insulation material : puf 8. Tube length : 1500 mm 9. Temperature range : 50 to 800c 10. Warranty : 1 year except on glass 11. Domestic system : 6 ft. From bottom of tank 12. Industrial system : 3-4 mtrs. From bottom of tank 13. Required area : 2.5sq. Mtrs. Per 100lpd Technical specifications Benefits Standard
Specifications: 1) Tank Inner tank: SUS 304-2B (food grade) Stainless Steel. Outer tank: SUS 201 Stainless Steel. Insulation layer: Polyurethane Foaming. Heat preservation: 72h. Tank capacity: 98L ~ 300L. 2) All Glass Vacuum Tube Diameter:ª¦47, ª¦58 Length: 1500mm, 1800mm. Numbers of tube: 15, 16, 18, 20, 24, 30pcs. Hail resistance: 25mm 3) Bracket Material: SUS 201 Stainless Steel. 4) Accessories: Electric Heater, Controller, Assistant Tank, Magnesium Stick and so on. Pack in cartons
Patio halogen heater Ce and rohs approval
