Horizontal Gas/Oil fired industrial steam boiler features: •Adopt numerical control, include Automatic Mode, Manual Mode, Timing Mode, Error Recording, password protection,etc. •Be provided with automatic blow down system (Independent patent technology) •Automatic Scale alarm(Independent patent technology), overpressure protection devices ensure the safety of the boiler •Easy maintenance, front door of smoke box adopt articulated joint which is convenient to be open, the cleaning of close-by flue tubes become easy too. •Safe and reliable, before leave the factory, all the boiler have to pass series of strict tests to ensure the safety and reliability of combustion and auto control devices Parameter: Type Mode Rated evaporation (t/h) Rated pressure (Mpa) Rated evaporation temperature (°C) Diesel consumption (Kg/H) Natural gas consumption (Nm3/h) Weight (T) horizontal central reverse flame WNS0.5-0.8-YQ 0.5 0.8 175 34.4 41.1 3.735 WNS0.7-0.8-YQ 0.7 48.2 57.5 5.502 WNS1.0-1.0-YQ 1.0 68.8 82.1 5.68 WNS2.0-1.0-YQ 2.0 1.0 184 137 164.3 8.255 WNS1.5-1.0-YQ 1.5 103 123.15 9.885 WNS2-1.0-YQ 2.0 137 164.3 11.14 horizontal three Pass WNS1.5-1.25-YQ 1.5 103 123.15 9.689 WNS2.0-1.25-YQ 2.0 137 164.3 11.6 WNS2.5-1.25-YQ 2.5 1.25 194 172 205.5 15.0 WNS3.0-1.25-YQ 3.0 206 246.3 17.12. Standard pickings( well wrapped in plastic clothes packing with wooden case).
Industrial burners
M1700 type (d/c): Dia3/6, dia4/9, dia6/12, dia9/18, dia12/24 M1800 type (d/c): Dia3/6, dia4/9, dia6/12, dia9/18, dia12/24 Plastic paper inside, Polyfoam filled, Wooden box outside
Main Specifications: Inside Chamber Size dia60x300mm(diameter2.5" x 12") Standard Working Temperature 1650 . C ( continuous ) Maximum Working Temperature 1700 . C ( < 3 hrs) Temperature Control 30 steps programmable and PID automatic control Heating Rate 0~10 . C / min (suggestion: =< 10 . C) Temperature Accuracy +1 . C Heating Element MoSi2 heating elements Working Voltage AC 220V Single Phase 60/50 Hz (or according to your requirement) Max. Power 5 KW Net Weight 150 Kg Plastic paper inside, Polyfoam filled, Wooden box outside.
Main Specifications: Inside Chamber Size 200 x 200 x 200 mm (8"x8"x8", 8 Liter) Standard Working Temperature 1500oC ( continuous ) Maximum Working Temperature 1600oC ( < 3 hrs) Furnace Atmosphere Nitrogen, Argon and other inert gases Temperature Control 30 steps programmable and PID automatic control Heating Rate 0~ 10.C/ min (suggestion: =< 10.C ) Temperature Accuracy +/- 1 .C Furnace structure double shell with fan cooling Heating Element MoSi2 heating elements Thermocouple B type Working Voltage AC 380V Three Phases 60/50 Hz (or according to your requirement) Max. Power 10KW Outside Size 550 x 540 x 820 mm Net Weight 230 Kg Plastic paper inside, Polyfoam filled, Wooden box outside.
Heatsink (DP-11Industrial Heatsink) Overall Dimension:165.5X161.5X58.5mm Material:Al Fin+Heatpipes+Cu Base Weight:335g. Industry packing.
Configuration accompanied the machine Air agitator, vacuum pump (including cooling water pump that is started in the same step, water tank), electric control system, electric heating system, 5 layers silica rubber bags, furnace body and electric load/unload section. Parameter : 1.Dimension (L*W*H):3750*2250*2000 mm 2.MAX. area of glass to be processed: 3100*1800 mm 5 layers silica rubber bags (its size: 3400*1950mm) 3.Thickness: 3-15mm 4.Power: 43KW 5.N.W: 2.5T 6.Layer:5 layers (for circulating)
Glass heat bending furnace (NEW type)-FY-W-A This machine have top and bottom heating chambers, the top chamber is for heating and bottom chamber is for fixing shapes. Its temperature is controlled by imported PLC. The platform is elevated by air cylinder. It is easy to be operated. It takes about 5 hours to finish one time. It is suitable for heat bending glass, such as, glass furniture, glass coffee table, glass sanitary right corner counter top and decorative project glass, etc. Parameter: 1.thickness : 3-25mm 2.power : 380V/26kw 3.dimension : 2700*1441*1320mm 4.inner size : 2300*1100*700mm 5.N.W : 1.2T 6.Speed: heating time 2-2.5 hours cooling time 3 hours
1. Loading capacity - 400 kg to 1200 kg gross 2. Heating - electric heater type/ gas type 3. Quenching - oil quenching or molten salt 4. Atmosphere - nitrogen methanol, endo gas As per the equipment
1. Capacity - fromm 100 kg/batch to 2000kg/batch 2. Media - steel shots ( cast or cut wire) 3. Dust collector- standard cloth bag or cassete type 4. M/c type - thumb blast, table type, t- rail type, hanger type, cont. Blast type etc. Depend on machine size, export quality wood packing
Hollow silver statue and indian god, elephant, and ather animalls in light weight silver electro formed well in finishing.All articals r 92.5silver, 999silver, avelable on request. Standared plastic paking.
Technical parameter The rated power of the area of hot zoneª1450f¦ The ways of mark the dimensionªgc d/l/m/d D --hot zone diameter ffd-- cold end diameter M --cold end lengthff n-- the length of spray aluminium zero L-- hot zone lengthff l --total length Our sic heating elements adopt special technics and can save you energy. Silicon carbide (sic) heating element is a non-metal electric heating element made from sic as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance, etc. Used in the industries of glass, ceramic, machinery, analysis test, semiconductor, science & research and so on.
Ground granulated blast furnace slag 1. Fineness (m2 /kg): 370. 2. Soundness le-chatelier expansion (mm) : nil. 3. Initial setting time (min) Not less than opc:220. 4. Insoluble residue(%):0.05 5. Magnesia content (%):9.5 6.Sulphide sulphar(%):0.60 7. Sulphite content (%):0.10 8. Loss on ignition (%):0.30 9. Manganese content (%):0.06 10. Chloride content(%):0.003 11. Moisture content(%):0.005 12. Glass content(%):94 13. Compressive strength (n/mm2): After 7 days34.0 After 28 days53.0 14. Chemical moduli A). Cao + mgo + sio2 :84.0 B). Cao + mgo /sio2 :1.30 C). Cao/sio2 :1.05. Tonnes packed in i tonne or i.5 jumbo bags.
1. Fineness (m2 /kg): 370. 2. Soundness le-chatelier expansion (mm): nil. 3. Initial setting time (min) Not less than opc:220. 4. Insoluble residue(%):0.05 5. Magnesia content (%):9.5 6.Sulphide sulphar(%):0.60 7. Sulphite content (%):0.10 8. Loss on ignition (%):0.309. Manganese content (%):0.06 10. Chloride content(%):0.003 11. Moisture content(%):0.005 12. Glass content(%):94 13. Compressive strength (n/mm2): After 7 days34.0 After 28 days53.0 14. Chemical moduli A). Cao + mgo + sio2 :84.0 B). Cao + mgo /sio2 :1.30 C). Cao/sio2 :1.05. Tonnes( 1 tnnes and 1.5 tones in jumbo bags).
1.sintering and thermal treatment of hard alloy products. 2.precise temperature control. 3.non-protective gas operation. Vacuum Sinter Furnace is mainly used for the sintering and thermal treatment of hard alloy products. In operation, the sintering process is accomplished under vacuum state. The product features its precise temperature control, even inner temperature, non-protective gas operation, high performance and stable quality. This sintering equipment is suitable for hard alloy industry. Place of Origin Hunan, China (Mainland) Brand Name GaoXin Model Number GXZK-50 Usage Sintering Furnace Type Other Condition New Type Furnace Processing Type Machining Equipment .
The ball grinding method. 2.Hood made of stainless steel. 3.Safe running. The ball grinding mill adopts the ball grinding method. With its hood made of stainless steel, the machine is structured to ensure safe running. Materials wont be polluted when the powder is turned over, falls off or collected. It is especially suitable for production of alloy mixtures in large and medium-sized enterprises. Place of origin hunan, china (mainland) Brand name gaoxin Model number gxqm-100 Processing type machining equipment Type rolling mill.
1.drying and mixing. 2.mixing shaft with special structure. 3.chamber with smooth inner walls. 4.an airtight structure. Z Type Spiral Mixing Dryer refers to a new type of device integrating the functions of both drying and mixing. With areas contacting with materials made of stainless steel, the product features its mixing shaft with special structure and chamber with smooth inner walls. As the pneumatic system is employed to power the overturning of the mixing chamber that can be automatically tilted, the labor intensity can be greatly reduced. The drying process is accomplished within an airtight structure. The alcohol reclaim unit set in the device can collect the alcohol for reuse. Actual applications prove the device is especially suitable for plastic mixing and agitating processes in metallurgical industry. Place of Origin Hunan, China (Mainland) Brand Name GaoXin Model Number GXZH-50 Type dryer .
1.Evenness and precision of control. 2.The gases can be hydrogen, ammonia or air. The blue tungsten oxide furnace, also called turning tube furnace, is a must device in the powder metallurgy industry (especially the metallurgy of tungsten and molybdenum), whose main use is to turn the semifinished product apt (ammonium paratungstate) into blue tungsten oxide and molybdenum through the proper control of temperature, time, inside atmosphere and pressure in furnace. The pif-regulated control system, for the temperature control, consists of the thermal coupler, temperature controller and controllable silicon trigger and features its evenness and precision of control. The staying time of furnace materials can be set by changing the rotation speed and slant of the furnace tube on the basis of the process requirements. The gases in the furnace chamber can be customized as hydrogen, ammonia or air.
1.Running under the airtight state. 2.Enhance the reclamation rate of solvent. The vertical vacuum mixing dryer can replace the traditional single-spiral mixer, vibrating dryer and water heater, whose several processes can now be performed by the single dryer. Running under the airtight state, the dryer can improve the production environment and enhance the reclamation rate of solvent. Due to its compact structure comprising of the specially shaped mixing shafts installed in an intersecting manner and rotation vis-a-vis, the materials and additives can be evenly mixed. The scraper is used to remove the material to avoid the sticking of the inner walls. Brand name gaoxin Model number gxlsh-30 Processing type machining equipment Type dryer.
2 heat setting: 400w/800w high effciency, energy-saving safety tip-over switch safety thermal fuse and over heat protection high-temperature-resistant plastic housing, cool touch cabinet with handle carry, portable
