1.sintering and thermal treatment of hard alloy products.
2.precise temperature control.
3.non-protective gas operation.
Vacuum Sinter Furnace is mainly used for the sintering and thermal treatment of hard alloy products. In operation, the sintering process is accomplished under vacuum state. The product features its precise temperature control, even inner temperature, non-protective gas operation, high performance and stable quality. This sintering equipment is suitable for hard alloy industry.
Place of Origin Hunan, China (Mainland)
Brand Name GaoXin
Model Number GXZK-50
Usage Sintering Furnace
Type Other
Condition New
Type Furnace
Processing Type Machining Equipment .
Vacuum sinter furnace is mainly applied for sintering processes of tungsten alloy, magnetic, heavy alloy, moly alloy, cemented carbide.
High vacuum sintering furnace is mainly applied for sintering processes of tungsten alloy, magnetic, heavy alloy, moly alloy, cemented carbide and ZrO blacken treatment.
Vacuum debinding and sinter furnace is mainly suitable for debinding and sinter process of tungsten alloy, heavy alloy, moly alloy, titanium alloy and cemented carbide materials. The vacuum debinding sitering furnace is used for PEG, paraffin and rubber binder removing. It can also do vacuum sinter, partial pressure sinter and minor pressure sinter processes.
Max. Temperature 1400.C Working temperature
Features: 1.Double layer steel casting with air cooling fans to keep case temperature lower; 2.High purity fiber alumina board chamber for the best energy saving; 3.The temperature is controlled by precision scr(silicon controlled rectifier) with accuracy +/-1 c and 30 segments programmable control; 4.The fast rate of temperature increasing and decreasing. 5.The furnace chamber is ceramic fiber brick with excellent thermal insulation, vacuum reservoir with water cooling system 6.The furnace is equipped with the function of power off automatically when door furnace opening, function of over temperature alarm, etc. Descriptions: Chamber dimension 150x150x150mm Max. Temperature 1600c Working temp.
Vacuum Furnace Introduction: ShinTek can produce varieties of Vacuum Furnaces, including Vacuum heat treatment Furnace, Vacuum Brazing Furnace, Vacuum Sintering Furnace, Vacuum Induction Melting Furnace and so on… Vacuum Heat Treatment Furnace: Vacuum Quenching Furnace, Vacuum Annealing Furnace, Vacuum Tempering Furnace, Vacuum Carburizing Furnace, etc... Vacuum Brazing Furnace: Vacuum Aluminum Brazing Furnace, Vacuum High Temperature Brazing Furnace, Vacuum Diffusion Brazing Furnace, etc... Vacuum Sintering Furnace: Vacuum Powder Metallurgy Sintering Furnace, Vacuum MIM Sintering Furnace, Vacuum Hot Pressing Furnace... The Vacuum Furnace can be used for a wide of industries, including High Speed Steel, Die Steel, Alloy Steel, Aluminum and Aluminum alloy, Ti alloy, Beryllium Bronze, Precision alloy, Stainless Steel, High temperature alloy, refractory metal, hard metal, magnetic material, nonferrous metal, etc… Vacuum Furnace Specifications: Model STVF-Q-40 STVF-Q-65 STVF-Q-85 STVF-Q-120 STVF-Q-160 STVF-Q-240 STVF-Q-500 Working zone size 450*300*300 600*400*400 750*500*500 900*600*600 1100*700*700 1200*800*800 3500*800*600 Load (KG) 60 150 250 500 800 1000 2500 Power 40KW 65KW 85KW 120KW 160KW 240KW 500KW Max. temperature 1350? Temperature uniformity +/-5? (can achieve +/-3?for some specific project.) Ultimate vacuum level (Cold) 8*10-4 Pa Leakage rate =0.67 Pa/h Vacuum Furnace features: (1) Vacuum Furnace – Patented hotzone design enable a high energy efficiency; (2) Vacuum Furnace – High vacuum level, enable it can be used for a wide of industries; (3) Vacuum Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten… (4) Vacuum Furnace – Reasonable hotzone design enable a high temperature uniformity; (5) Vacuum Furnace – Friendly control system.
Features 1. Operation temperature: 1300°c (1400? for short time). 2. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina Fiber ceramic insulation. 3. Heavy duty double layer structure with cooling fan. Lower temperature in outside case. 4. Pid automatic control via current limiting phase angle fired the resistor, e.G. Scr(silicon controlled rectifier). 5. Power control with 30 segments programmable. Descriptions Chamber size 200x200x200mm (8"x8"x8") Working temperature 1300? (continuous) Maximum temperature 1400? (for short time) Temperature control 30 steps programmable and pid automatic control Heating rate 0~15?/min (suggestion: =10?) Temperature accuracy +/-1? Heating element Silicon carbide heating element(sic) Working voltage Ac 220v, single phase, 60/50 hz (or according to your requirement) Max. Power Approx 4 kw Outside size 580x580x920mm Net weight 130kg The furnace chamber size can be customized.
Features: 1. Operation temperature: 1500? (1600? for short time). 2. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation. 3. Heavy duty double layer structure with cooling fan. Lower teperature in outside case. 4. Pid automatic control via current limiting phase angle fired the resistor, e.G. Scr(silicon controlled rectifier). 5. Power control with 30 segments programmable. Descriptions: Chamber sizeF60x300mm (2.5"x12") Working temperature1500? (continuous) Maximum temperature1600? Temperature control30 steps programmable and pid automatic control Heating rate0~15?/min (suggestion: =10?) Temperature accuracy+/-1? Heating elementMolybdenum disilicide (mosi2) Working voltageAc 220v, single phase, 60/50 hz (or according to your requirement) Max. Power4 kw Net weight70 kgnote: there are different chamber(tube) sizes for your choice.
Features: 1.Max. Energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina Fiber ceramic insulation. 2.Heavy duty double layer structure with cooling fan. Lower temperature in outside case. 3.Pid automatic control via current limiting phase angle fired the resistor, e.G scr(silicon controlled rectifier) 4. Power control with 30 or 50 segments programmable. Descriptions ProductTouch screen atmosphere muffle furnace Chamber size300x300x500mm (wxhxd) Max. Temperature1200°c Working temp.=1100°c (continuous) Heating rate0-15°c/min (suggestion: 0-10°c/min) Temp. Control30 or 50 steps programmable and pid automatic control ThermocoupleK type Temp. Accuracy+/-1°c Heating elementFe-cr-al-mo resistance wire Furnace structureDouble layer steel casing with dual cooling fan Working voltageAc 208-380v, single phase, 50/60 hz. (or according to your requirement.) Payment termT/t in advance Delivery timeIn 15 days after receiving the payment. ShipmentBy air, sea, etc. Packing detailsPacking - plastic paper inside, polyfoam filledwooden case outside
