Portable gas stove, portable gas heater, roast stove.
Coke Less Blast Furnace
Product Description - DRI Price of product ( USD price or FOB price) - RS 150000.00
Rotary Hearth Furnace Based Pig Iron This is the Latest Technology to Produce the Pig Iron or MS Iron out of the Iron Ore Fines and Non-coking Coal. In this Technology, the Coal Consumption is the minimal as compared to the Tunnel Kiln Process or Rotary Kiln Process. Through RHF, either Pig Iron (Fe=96-97% C=3.0-4.0%) or MS Steel (Fe=99% C=0.2% Mn=0.3% etc) or HBI (Hot Briquetted Iron) (Fe=92% C=0.25%) can be made, depending upon the requirement. The entire time for the Reduction, Melting and Product Out will be around 45 min, so the larger capacity of the Plants can be made. This process is also Lowest Space Consuming Plant. The Best Part of this Technology is that we can Product the Ferro Alloys too, like Ferro Nickel (Fe-Ni), Ferro Chrome (Fe-Cr) or Ferro Vanadium (Fe-V) etc from the same Plant, by implementing different Parameters of Operations. We can Control the Low Carbon Ferro Chrome, MS Steel and many more.
Continuous Coconut Shell Carbonization Furnace This machine is equipped with:Auto-feeding Conveyor, Biomass Gasifier equipment, Dust-Removal Device, Gas cleaner system, PLC controlled and manual / automatic dual- control System, Cooling and Discharging conveyor, Carbonization Furnace and other equipments. While Carbonization of the raw material inside of the Carbonization Furnace (like coconut shell, sawdust, Palm shell, rice husk, straw, wood scrap etc.), the produced Flue Gas is recirculated in pipeline and is fed back to Heating System after purification, becomes combustible gas (carbon monoxide, methane, ethane). When the temperature reached, Carbonization furnace starting carbonizing the raw materials fed, producing the flue gases, which becomes a combustible gas after spray pour, cooling purification by the cooling purification system, to continue the carbonization Process, then Gasifier stops working or set on the minimal use. Temperature is been regulated and controlled by control system. The Feeding of the Raw Material is also regulated for the Qualified End Product. Based on the requirement of the Plant ie output of the finished Product, we can deploy a set of Furnace or Bank of furnace to yield the desired production quantum. Plant Capacities : 300 kg/hr to 2000 Kgs/hr continuous type.
Kerosene heater, kerosene heating stove.
Twin Lobe Blower
Trading and exporters of high quality industrial, ovens, furnaces and Dryers, such as Brazing furnaces, Sintering Furnaces, Annealing Furnaces & all types of furnaces spares parts.
Solar water heater, solar collector, air resource heat pump, water heater.
Solar Water Heaters.
Heat pump water heater, solar water heater, induction water heater, air cooler.
POPULA Fan Y6-30 Boiler Centrifugal Induced Draft Fan High Temperature Resistant Fan Low Noise Fan Product Introduction: It is specially designed for boiler using , featured by high efficiency and low noise ,the fan is used for ventilation system to transport air without corrosive and adhesive materials . The temperature of the media shall not exceed 250â?? . PRODUCTS INFO: Type:POPULA Industrial Boiler centrifugal induced draft fan Y6-30 Brand:POPULA Electric Current:AC Power:0.75-18.5 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:655-14000 CMH Air Pressure:727-3226 Pa Speed:1850-2350 rpm Max Noise:
Electric Furnace Electric furnace AEMF120 Electric furnace AEMF120 is specially designed to be used to melt metal alloy (zinc alloy and tin alloy) for rubber mold centrifugal casting purpose. Features: Automatic control. Energy saving Insulated protection shield and head. Safety circuit to prevent overheated. Temperature rises rapidly. Automatic consistent temperature control. Appointment heating start/stop time. Casted iron crucible. Specification: Power: 9KW. Loading capacity: 80kg (zinc alloy) Temperature: 600 deg; C max. Electric furnace EMF120 Electric furnace EMF120 is specially designed to be used to melt zinc alloy and tin alloy for rubber mold centrifugal casting purpose. Features: Automatic control. Energy saving Insulated protection shield and head. Safety circuit to prevent overheated. Automatic consistent temperature control. Appointment heating start/stop time. Casted iron crucible. Specification: Power: 9KW. Loading capacity: 80kg (zinc alloy) Temperature: 600 deg; C max. Electric furnace EMF50 Electric furnace EMF50 is specially designed to be used to melt lead alloy, magnesium zinc alloy for rubber mold centrifugal casting purpose. Features: Automatic control. Insulated protection shield. Safety circuit to prevent overheated. Automatic consistent temperature control. Appointment heating start/stop time. Specification: Power: 6KW. Loading capacity: 50kg (lead alloy) Temperature: 600 deg; C max
This furnace is designed for thick film products firing, such as Hybrid IC, chip-R, SMD components terminal, LTCC, Stainless steel heater, PV thin film cell and other similar products. Temperature Range: Belt Material: Cr20Ni80 Firing Atmosphere: Dry and clean Compressed air. Heating Element heating board Cooling Mode: fan cooling. Temperature Zone: 6 Zones. Chamber Temperature Uniformity: Overall Dimension:
A deal of South Bend ovens, 15oven, at a cheaper price than the market. New stock, works with electricity
About Mini Blast Furnace A Mini Blast Furnace (commonly known as Mandir Bhatti or Shahi Bhatti) is a simple, time-tested and widely used system to produce secondary lead in India and many other countries. It is the most basic of all furnaces and a production system based on this technology has certain distinct characteristics such as: Low Project Capital Cost Low Energy Cost (wooden coke fired) Easy to install Easy to operate & maintain Production of low Antimony Lead (soft lead) at low temperature Generates high pollution Description of Mini Blast Furnace The Furnace itself is a modified blast furnace which consists of a brick lined structure with fire brick oven in the midst and a metal Exo-skeletal structure outside. Raw material & fuel (coke) is charged manually through the side metal doors fitted in the brick structure and air is provided from the FD fans provided at the back of the brick structure. Molten metal & slag is tapped at the pits made in front of the brick structure and flue gases are sucked from the top of the brick structure which is provided with a metallic hood. A typical Double Oven Mini Blast Furnace has the following standard sizes & specifications: Outside Dimensions of Brick Structure: 2400mm L x 1900mm W x 2400mm H No. of Ovens: 2 Nos. Oven Size Top Dia: 600mm Bottom Dia: 250mm Depth: 650mm No. of FD Fans: 2 Nos. (1 for each oven) FD Fan Capacity: 300cmh at 250mm of WG No. of Charging Doors: 2 Nos. (1 for each oven) Charging Door Dimensions: 1100mm H x 650mm W Advantages No consumables used other than Wooden Coke which is also used as Fuel Low Power Consumption Produces low Antimony Lead suitable for soft lead purposes Pollution can be controlled with minimum fugitive emissions Easy to install, operate & maintain Disadvantages Cannot recover 100% lead in the first operation Subsequent recovery of lead after first recovery consumes higher coke & manpower. Equipment cannot be scaled up for higher production capacities. Air Pollution Control System for Mini Blast Furnace Various types of lead present in used batteries, plates and paste of lead oxide are charged in the furnace. In addition to these, certain compounds of sulphur are also present in the batteries. When this material is heated in the presence of carbon, lead oxide is converted to lead. This conversion along with burning of fuel generates flue gases and fumes containing dust, dirt, oxides of lead, lead particles and other impurities etc. Hence, to meet various goals of maintaining employees' health, for factory environments as well as regulatory requirements, it becomes imperative to get high end Air Pollution Control Systems to be installed with the Mini Blast Furnaces.
Xinology GTF Series Glass Tempering Furnaces Are Used To Induce Stress On Glass Surfaces By Thermal Process This type of furnace is also named as glass thermally tempering furnace. Glass strength is increased compared with ordinary glass. Tempered, or also known as toughened glass, will usually shatter into small fragments instead of sharp shards when broken. These small cuboid fragments are less likely to cause injury. Xinology glass tempering furnaces also produce heat strengthened glass or also known as half tempered glass which shatters in big clusters.
Vacuum Precision Casting Furnace Vacuum precision casting furnace is designed for Melting heat-resistant high-temperature alloy material,and Casting of Equiaxed under vacuumed condition as well as for directionally solidified (DS) or single crystal (SC) structures . Efficiency :Crucible Basket to ensure fast crucible exchange and continuous operation. Easy operation: Humanized operation interface; rotary tower charging and temperature measuring devices to freely switch between load charge material and read temperature.
Thermic Fluid Heater
DTL series thermocouple verification furnace is a temperature field constant temperature equipment suitable for verification of various types of standard thermocouples, working precious metal thermocouples, and base metal thermocouples. This series of products has the advantages of good thermal insulation and anti-leakage. The technical indicators of its temperature field fully comply with the relevant national verification regulations and standard technical requirements. At the same time, our company also provides customers with non-standard customized services. Technical parameters: DTL-600 Low-cost metal thermocouple verification furnace Technical indicators n Furnace inner size:40 mm 600 mm n Temperature range:300~1200 n Thermal field distribution:Low-cost metal thermocouple verification furnace:within 30mm of the effective working area,the temperature difference between any two points is not more than 0.5,the radius is within 14mm,and the temperature difference between any two points of the same section is not more than 0.25 Specification:JJF1184-2007 thermocouple verification furnace temperature field test technical specification JJF1637-2017 cheap metal thermocouple calibration specification JJF1262-2010 Armored Thermocouple Calibration Specifications Scope of application:Verification/calibration of inexpensive metal thermocouples DTL-600B Precious metal thermocouple verification furnace Technical indicators Furnace inner size:40 mm ?600 mm Temperature range:300~1200 Thermal field distribution:S type thermocouple verification furnace:The highest temperature point deviates from the geometric center of the furnace:20mm,Temperature gradient/10mm. n Specification:JJF1184-2007 thermocouple verification furnace temperature field test technical specificationJJG141-2013 Work precious metal thermocouple verification procedures Scope of application: verification/calibration of standard thermocouples, working S/R thermocouples DTL-300 Thermocouple verification furnace Technical indicators Technical indicators n Furnace inner size:40 mm x 300 mm n Temperature range:300~1200 n Temperature field index:the center of the temperature field deviates from the geometric center10mm,the axial temperature gradient:0.4/10 mm Specification:JJF1184-2007 thermocouple verification furnace temperature field test technical specificationJJG668-1997 work platinum iridium 10-platinum,platinum rhodium 13-platinum short thermocouple verification procedures Scope of application:verification/calibration of S,R short thermocouples,short metal optic thermocouples v Furnace opening size can be customized
