Rotary Hearth Furnace Based Pig Iron This is the Latest Technology to Produce the Pig Iron or MS Iron out of the Iron Ore Fines and Non-coking Coal. In this Technology, the Coal Consumption is the minimal as compared to the Tunnel Kiln Process or Rotary Kiln Process. Through RHF, either Pig Iron (Fe=96-97% C=3.0-4.0%) or MS Steel (Fe=99% C=0.2% Mn=0.3% etc) or HBI (Hot Briquetted Iron) (Fe=92% C=0.25%) can be made, depending upon the requirement. The entire time for the Reduction, Melting and Product Out will be around 45 min, so the larger capacity of the Plants can be made. This process is also Lowest Space Consuming Plant. The Best Part of this Technology is that we can Product the Ferro Alloys too, like Ferro Nickel (Fe-Ni), Ferro Chrome (Fe-Cr) or Ferro Vanadium (Fe-V) etc from the same Plant, by implementing different Parameters of Operations. We can Control the Low Carbon Ferro Chrome, MS Steel and many more.
Continuous Coconut Shell Carbonization Furnace This machine is equipped with:Auto-feeding Conveyor, Biomass Gasifier equipment, Dust-Removal Device, Gas cleaner system, PLC controlled and manual / automatic dual- control System, Cooling and Discharging conveyor, Carbonization Furnace and other equipments. While Carbonization of the raw material inside of the Carbonization Furnace (like coconut shell, sawdust, Palm shell, rice husk, straw, wood scrap etc.), the produced Flue Gas is recirculated in pipeline and is fed back to Heating System after purification, becomes combustible gas (carbon monoxide, methane, ethane). When the temperature reached, Carbonization furnace starting carbonizing the raw materials fed, producing the flue gases, which becomes a combustible gas after spray pour, cooling purification by the cooling purification system, to continue the carbonization Process, then Gasifier stops working or set on the minimal use. Temperature is been regulated and controlled by control system. The Feeding of the Raw Material is also regulated for the Qualified End Product. Based on the requirement of the Plant ie output of the finished Product, we can deploy a set of Furnace or Bank of furnace to yield the desired production quantum. Plant Capacities : 300 kg/hr to 2000 Kgs/hr continuous type.
Supplier: Steel plants and activated carbon and coconut shell charcoal equipments, coke less blast furnace, coconut shell charcoal, pyrolignous acid, natural herbal extracts, special herbal extracts
Services: Manufacturer and exporter
according to different minerals, different furnaces can be designed here: nickel iron furnace, manganese furnace, copper melting furnace, chrome ore furnace, Magnetite furnace etc., including inlet system, feeding system, roof system, front slagging and tapping system, gas system, power system, cast iron machine, hot blast furnace, thermal instrumentation system. Our furnaces have advantages of high yield, low coke rate, no nodulation, and easy operation. With the top advanced technology, every procedure is the optimal scheme after repeated screening, which makes things more reasonable.
The introduction of blast furnace Blast furnace is the shaft furnace of metallurgical equipment.Blast furnace is used for melting furnace burden(ore, sinter or pellet) that contains metal components, melting need to add air or happen in oxygen-rich e copper and other materials processing.Blast furnace burden is generally block, fuel is coke.Burden is added in batches from :0.6 m2, 1.2 m2, 2 m2, 2.6 m2, 3.2 m2, 5.6 m2, 8 m2, 10 m2, 11m2 and so on.Our company can design and produce different specification and structures blast furnace based on customer¡¡¡ê¡ès actual demand. Depend on your need
blast furnace slag granules used as cement additives
About Mini Blast Furnace A Mini Blast Furnace (commonly known as Mandir Bhatti or Shahi Bhatti) is a simple, time-tested and widely used system to produce secondary lead in India and many other countries. It is the most basic of all furnaces and a production system based on this technology has certain distinct characteristics such as: Low Project Capital Cost Low Energy Cost ( wooden coke fired) Easy to install Easy to operate & maintain Production of low Antimony Lead (soft lead) at low temperature Generates high pollution Description of Mini Blast Furnace The Furnace itself is a modified blast furnace which consists of a brick lined structure with fire brick oven in the midst and a metal Exo skeletal structure outside. Raw material & fuel (coke) is charged manually through the side metal doors fitted in the brick structure and air is provided from the FD fans provided at the back of the brick structure. Molten metal & slag is tapped at the pits made in front of the brick structure and flue gases are sucked from the top of the brick structure which is provided with a metallic hood. A typical Double Oven Mini Blast Furnace has the following standard sizes & specifications: Outside Dimensions of Brick Structure 2400mm L x 1900mm W x 2400mm H No. of Ovens 2 Nos. Oven Size Top Dia 600mm Bottom Dia 250mm Depth 650mm No. of FD Fans 2 Nos. (1 for each oven) FD Fan Capacity 300cmh at 250mm of WG No. of Charging Doors 2 Nos. (1 for each oven) Charging Door Dimensions 1100mm H x 650mm W Manufacturing Process Lead to be manufactured from Mini Blast Furnace is usually obtained from scrapped batteries. They are cut open or broken to segregate lead scrap, plastic and other materials from it. Lead scrap in the form of lead powder and plates etc. is charged in the furnace along with a proportionate charge of wooden coke. Thereafter the furnace is manually fired with the help of rags. FD Fan provides the necessary air required for combustion from the back of the furnace. Coke in the oven performs the functions of both, the fuel as well as a reducing agent for obtaining lead from its oxides charged in the form of lead plates & powder. Temperature of the furnace is maintained at the desired level for approximately 30 minutes, after which molten lead along with slag flows out from the bottom of the oven into the outlet pit. Here slag is separated and molten lead is poured into Ingot Moulds. To maintain this, continuous charge of raw material and coke is maintained in the furnace. This process leads to generation of flue gases which are toxic in nature and need appropriate and adequate Air Pollution Control System for their treatment. Process Details for a typical Double Mini Blast Furnace Raw Material Charged 700-800 kg hr. Fuel used Wooden Coke Calorific Value of Fuel used 4000-5000 kCal kg Fuel Consumed 70-75 kg hr. Air provided for process 300 cmh Lead Produced (1st Charge) 300-350 kg hr. Flue Gas generation 8000-9000 cmh Advantages and Disadvantages of Mini Blast Furnace Advantages No consumables used other than Wooden Coke which is also used as Fuel Low Power Consumption Produces low Antimony Lead suitable for soft lead purposes Pollution can be controlled with minimum fugitive emissions Easy to install, operate & maintain Disadvantages Cannot recover 100% lead in the first operation Subsequent recovery of lead after first recovery consumes higher coke & manpower. Equipment cannot be scaled up for higher production capacities. Various types of lead present in used batteries, plates and paste of lead oxide are charged in the furnace. In addition to these, certain compounds of sulphur are also present in the batteries. When this material is heated in the presence of carbon, lead oxide is converted to lead. This conversion along with burning of fuel generates flue gases and fumes containing dust, dirt, oxides of lead, lead particles and other impurities etc. Hence, to meet various goals of maintaining employees' health, for factory environments as well as regulatory requirements, it becomes imperative to get high end Air Pollution Control Systems to be installed with the Mini Blast Furnaces. At the time of Delivery
Additives for concrete, cement, plastering mortar, reinforce weak ground, improve soil Benefits Reducing hydration, increasing waterproofing, increasing durability, reducing costs for concrete
About Mini Blast Furnace A Mini Blast Furnace (commonly known as Mandir Bhatti or Shahi Bhatti) is a simple, time-tested and widely used system to produce secondary lead in India and many other countries. It is the most basic of all furnaces and a production system based on this technology has certain distinct characteristics such as: Low Project Capital Cost Low Energy Cost (wooden coke fired) Easy to install Easy to operate & maintain Production of low Antimony Lead (soft lead) at low temperature Generates high pollution Description of Mini Blast Furnace The Furnace itself is a modified blast furnace which consists of a brick lined structure with fire brick oven in the midst and a metal Exo-skeletal structure outside. Raw material & fuel (coke) is charged manually through the side metal doors fitted in the brick structure and air is provided from the FD fans provided at the back of the brick structure. Molten metal & slag is tapped at the pits made in front of the brick structure and flue gases are sucked from the top of the brick structure which is provided with a metallic hood. A typical Double Oven Mini Blast Furnace has the following standard sizes & specifications: Outside Dimensions of Brick Structure: 2400mm L x 1900mm W x 2400mm H No. of Ovens: 2 Nos. Oven Size Top Dia: 600mm Bottom Dia: 250mm Depth: 650mm No. of FD Fans: 2 Nos. (1 for each oven) FD Fan Capacity: 300cmh at 250mm of WG No. of Charging Doors: 2 Nos. (1 for each oven) Charging Door Dimensions: 1100mm H x 650mm W Advantages No consumables used other than Wooden Coke which is also used as Fuel Low Power Consumption Produces low Antimony Lead suitable for soft lead purposes Pollution can be controlled with minimum fugitive emissions Easy to install, operate & maintain Disadvantages Cannot recover 100% lead in the first operation Subsequent recovery of lead after first recovery consumes higher coke & manpower. Equipment cannot be scaled up for higher production capacities. Air Pollution Control System for Mini Blast Furnace Various types of lead present in used batteries, plates and paste of lead oxide are charged in the furnace. In addition to these, certain compounds of sulphur are also present in the batteries. When this material is heated in the presence of carbon, lead oxide is converted to lead. This conversion along with burning of fuel generates flue gases and fumes containing dust, dirt, oxides of lead, lead particles and other impurities etc. Hence, to meet various goals of maintaining employees' health, for factory environments as well as regulatory requirements, it becomes imperative to get high end Air Pollution Control Systems to be installed with the Mini Blast Furnaces.