PVC Marble Wall Panel Production Line Multi Color PS Crown Moulding Corner Ceiling Moulding for Interior Decoration. European Palace Style Decorative Ceilings Classic Artistic Ceiling PS Ceiling Tiles.
On commercial buildings, the roof serves as much more than just a protective covering. Commercial rooftops house much of a building's equipment and material necessary for functioning, including pipes for gas, HVAC, and plumbing. You can help protect your building's pipes and your rooftop with non-penetrating rooftop supports system, which include roof pipe supports, duct supports, access ramps, maintenance platforms, equipment supports and more.
To ensure optimal performance and sustainability, non-penetrating rooftop supports systems are constructed from high quality steel components for insurmountable strength. All steel is hot-dipped galvanized to deliver a level of durability that even the most severe weather conditions cannot deteriorate. Each base is injection molded and specifically designed to handle the precise dead weight of pipes and equipment while allowing for variations in load distribution. By eliminating penetrations in your roof's protective membrane and building a product that is specifically designed to outlast industry standards.
Used for wall decoration, renovation, etc., divided into several uses: ceiling, partition wall, interior and exterior wall decoration, floor partition, etc.
Standard Size:1220 2440mm/ 1220 1830mm and customize
Thickness:3mm. 5mm, 8mm, 10mm, 15mm, 18mm, etc.
Material:PVC
Color:White
Certificate:ISO9000, ISO 14000, SGS
Density:0.45, 0.5, 0.55, etc.
Lead time: Sample order 2tons kgs 10-15 days, bulk order 10tons 5 days, 20tons 5-15 days.
GP Sheets Size
0.35-1.25mm(Thickness)
900/1000mm(Width)
1800-3600mm(length)
Mass of coating(both sides included)grams per square metre(GSM)-120/180/275/350/450
GC Sheets Size
0.5-1.25mm(Thickness)
810/910mm(Width)
1800-3600mm(length)
Mass of coating(both sides included)grams per square metre(GSM)-120/180/275/350/450
Oryx gypsum one of the manufacturers of gypsum powder products we are making :
Plaster of Paris ( POP )
Agricultural gypsum powder
Natural gypsum powder
Ceiling Board
1. Introduction
ceiling board is made of calcium silicate board in size 595 595mm or 603 603mm. It comes with a harmless coating on surface and selectable patterns. Due to the advantages of calcium silicate board, it s good against moisture and heat and insects, thus an ideal replacement of gypsum board. Furthermore, it s easy to install and helps to reduce labor cost.
2. Application
ceiling board can be applied to office, apartment, villa, super market, workshop, hospital, school etc. For one thing, it is used as false ceiling to make a place look better. For another, it is applied to keep away heat and save energy. Generally speaking, it s a green and durable building material.
3. Specifications
Size (mm) 595 595,
603 603,
Thickness (mm) 4 10
Moisture content (%) 10
Density (g/cm3) 1.15-1.4
Wet Expansion Rate(%) 0.25
Thermal Conductivity 0.30
Non- combustibility GB 8624-2006 Class A
Main Features
1.Environmental friendly, no asbestos
2.Non-combustible
3.Strong nail holding power
4.Heat & sound insulation
5.Smoothness ceiling board
6.Light weight in unit acreage
Characteristics
Item Standard Value Test Value
Density
(kg/m2) Thickness Regular Fire Resistant Water Resistant
500 12mm 700
Cross 140 9.5mm 180
180 12mm 240
Surface Paper Sticking the Core Material Unexposed Unexposed
Stability (min) Fire Resistant 20 20
Water Absorption
(%) Water Resistant 10 9.5mm 6.8
12mm 4.2
Radioactivity Internal IRa 1.0
Fiber Cement Board
1. Introduction
Fiber cement board is another most widely used building material in China. It could be used as wall and floor panel both inside and outside buildings due to its better performance than calcium silicate board. With main ingredients of Portland cement, quartz powder, slaked lime and fiber, being processed with high pressure and high temperature, fiber cement board turns into a very strong panel with same structure of marble. Moreover, by the improvement of technologies, we are able to produce it without any asbestos, which is really good for human health.
2. Application
Fiber cement board is good against water and heat, lighter than concrete but with high bending strength, thus good to be used for outdoor wall cladding, flooring, billboard, wall separation etc. Itâ??s an ideal replacement of concrete.
3. Specifications
Size (mm) 2440 1220,
2400 1200,
3000 1200,
Thickness (mm) 4.5 30
Water absorption (%) 40
Density (g/cm3) 0.95-1.45
Wet Expansion Rate(%) 0.25
Thermal Conductivity (W/m K 0.3
Bending Strength(MPa) 5.5-16
Non- combustibility GB 8624-2006 Class A
Calcium Silicate Board
1. Introduction
Calcium silicate board is a most widely used material in due to its good performance and easy-processing feature. It is moisture proof and heat resistant, so it is commonly used for wall and ceiling to keep away humidity and to slow down the spread of fire. What is more, it can be cut, nailed and screwed, making installation much easier. Then labor cost could be reduced as well.
2. Application
Calcium silicate board is moisture proof and heat resistant, strong and durable, thus commonly used as wall and ceiling for house, office, warehouse, shopping mall, residential complex etc.
3. Specifications
Size (mm) 2440 1220,
2400 1200,
3000 1200,
Thickness (mm) 4.5 20
Moisture content (%) 10
Density (g/cm3) 1.15-1.5
Wet Expansion Rate(%) 0.25
Thermal Conductivity (W/m K 0.30
Bending Strength(MPa) 9-12
Non- combustibility GB 8624-2006 Class A
1. Introduction
Wood grain siding board is made of calcium silicate board but with wood appearance, thus making it very good for building cladding. On one hand it is harmless to human body. On the other, it can reduce the use of wood and save a lot of trees. Furthermore, it is durable and good against insects and fire and weather. In a word, It is an ideal substitute for wood.
2. Application
Because of its beauty and good performance, wood grain siding board is normally used for overlapping buildings like villa, bungalow, resort and interior decoration for house. It can be painted with various colors and make buildings look grand and shining.
3. Specifications
Size (mm) 3000*1200,
3050*200,
2750*200,
Thickness (mm) 7.5-9
Water absorption (%) less than 40
Density (g/cm3) 1.2-1.35
Wet Expansion Rate(%) 0.25
Thermal Conductivity (W/m less than 0.3
Bending Strength(MPa) 10-16
Non- combustibility GB 8624-2006 Class A
1. Introduction
With new materials and technologies, Improved Kam Chung magnesium oxide board has better performance and avoids the defects of traditional MgO board. We use an alkali-resisting glass fiber net to increase product strength, and new technologies to prevent the "crying" phenomenon. In that case, our products can be used in humid area and no need to worry about quality problem.
2. Application
Kam Chung Magnesia board is light in weight, resistant to fire, high in strength, good against moisture, thus suitable for a wide range of general building uses, such as ceiling, wall board and flooring for residential complex, hospital, school, workshop, warehouse, stadium or even furniture and billboard.
3. Specifications
Size (mm) 2440*1220
Thickness (mm) 3 -20
Moisture content (%) 8
Density (g/cm3) 0.6-1.4
Wet Expansion Rate(%) 0.6
Thermal Conductivity (W/mïK) 0.30
Bending Strength(MPa) 10
Shock Resistance (Kj/) 2
Dry Shrinkage Rate (%) 0.3
Nail-holding Ability (N/mm) 25
Content of Chloridion (%) 10
Non- combustibility GB 8624-2006 Class A
Impermeability No water drops on the other side
Wellyoung acoustic perforated gypsum board is designed on the basis of helholtz resonance theorem, After perforated, the holes, board and the wall make up of many resonant cavities, when air molecules pass the holes, the resonant cavities will consume large quantities of sound energy. It is widely used in auditorium, office, cinema, hospital, school and so on.
Size 1200x2400mm
Thickness 12mm
Size of hole Round, Square, Cross, Irregular, Micro, Rectangle,
Perforation Patterns H1, H2, H2L, H4, H4L, H6, H8
Perforation Rate 6.8%-19.6%
Sound Absorption NRC 0.70
Feature
1. Acoustic perforated gypsum board
2. Light weight in unit acreage
3. High edge rigidity
4. Strong nail pull resistance
5. Smooth,paintable surface
6. NO visible joints and grid
7. Sustainable,fully recyclable material
8. Installs on any standard drywall suspension system
9. Fireproof and stop burning
10. Moisture resistance,sag resistance
Wellyoung acoustic perforated gypsum board is designed on the basis of helholtz resonance theorem, After perforated, the holes, board and the wall make up of many resonant cavities, when air molecules pass the holes, the resonant cavities will consume large quantities of sound energy.It is widely used in auditorium, office, cinema, hospital, school and so on.
Feature
1. Acoustic perforated gypsum board
2. Light weight in unit acreage
3. High edge rigidity
4. Strong nail pull resistance
5. Smooth,paintable surface
6. NO visible joints and grid
7. Sustainable,fully recyclable material
8. Installs on any standard drywall suspension system
9. Fireproof and stop burning
10. Moisture resistance,sag resistance
