On commercial buildings, the roof serves as much more than just a protective covering. Commercial rooftops house much of a building's equipment and material necessary for functioning, including pipes for gas, HVAC, and plumbing. You can help protect your building's pipes and your rooftop with non-penetrating rooftop supports system, which include roof pipe supports, duct supports, access ramps, maintenance platforms, equipment supports and more.
To ensure optimal performance and sustainability, non-penetrating rooftop supports systems are constructed from high quality steel components for insurmountable strength. All steel is hot-dipped galvanized to deliver a level of durability that even the most severe weather conditions cannot deteriorate. Each base is injection molded and specifically designed to handle the precise dead weight of pipes and equipment while allowing for variations in load distribution. By eliminating penetrations in your roof's protective membrane and building a product that is specifically designed to outlast industry standards.
Supplier: Solar racking manufacturers,solar roof mount,solar panel mounting,solar rooftop racking,carport mounting systems,adjustable solar panels
Supplier: Solar mounting system, solar bracket, ground mounting system, rooft mounting system, carport structure, floating structure, tracker system,
mounting structure, support structure
Services: Manufacturing
Supplier: Pipe support and hanger system including strut channel, pipe clamp, beam clamp, channel bracket, threaded rod, hex bolts, spring nut, siphonic drainage system including roof drain, hdpe pipe, fittings and so on.
Product Introduction: It is suitable for various roofs. As the temperature varies each morning and night in different seasons, the Wiskind RSS486 roofing system adapts to the thermal expansion and contraction of roofs caused by environment changes as much as possible through the RSS486 sliding support. Meanwhile, the RSS486 roofing system enables the whole roof to have the best weather-proof performance through precision molding in the factory and on-site automatic seam-sealing technology of up to 496 seam-sealing roofs. Product Advantages: 1.Reasonable Section Design. The outstanding section properties give full play to the mechanical properties of materials. 2.The Installation Auto-lock Function. It sovles the problem that the roof is lift by wind because seams of corrugated steel sheet are not sealed in time so as to improve the installation safety of roofs and speed up the installation speed. 3.The super Strong Wind-resistant Capacity. After it is meshed with the support and sealed, the concave mesh is 360+135 and the convex mesh is 315. The strong connection between the corrugated steel sheet and the support and between corrugated steel sheets makes the roof become an integrated one, which effectively guarantees the wind-proof capacity of the whole roof. 4.Excellent Water Tightness and Air Tightness. The multilayer mesh of the seam sealing of corrugated steel sheets with dedicated sealant makes the roof become an integrated one, and improves the water tightness and air tightness of the whole roof.
Ceiling T-Grid/ Ceiling support bar/Ceiling suspension T bar with high materials. Product with anti-corrosion and moisture. Also with ametabolic, fastness ceiling support bar that widely used in hotel, home, bus station, supermarket, office building, shopping mall, retallm hospital, corridor and so on. Normal plane T-Grid/ T-Bar System Main Tee Size:(Height*Width*Length) 38*24*3600mm 38*24*3660mm 38*24*3750mm 32*24*3600mm 32*24*3660mm 32*24*3750mm Thickness: 0.25mm, 0.30mm, 0.35mm, 0.40mm Cross Tee Size:(Height*Width*Length) 26*24*1200mm 26*24*1220mm 26*24*600mm 26*24*610mm THickness:0.25mm,0.30mm Wall Angle Size:(Height*Width*Length) 24*24*3000mm 22*22*3000mm 20*20*3000mm Thickness: 0.3mm, 0.4mm Narrow(Slim) Plane T-Grid/ T-Bar System(SPT system) Main Tee Size:(Height*Width*Length) 38*15*3600mm 38*15*3660mm 38*15*3750mm 32*16*3600mm 32*16*3660mm 32*16*3750mm 32*14.5*3600mm 32*14.5*3660mm 32*14.5*3750mm Thickness: 0.26mm, 0.30mm, 0.35mm, 0.40mm Cross Tee Size:(Height*Width*Length) 32*14.5*1200mm 32*14.5*1220mm 32*14.5*600mm 32*14.5*610mm Thickness:0.26mm, 0.30mm Wall Angle Size:(Height*Width*Length) 24*15*3000mm 20*15*3000mm Thickness: 0.30mm, 0.40mm Shijiazhuang Shengyi Building Materials Co., Ltd is the leading manufacturer in China which specializes in producing Ceiling T Grid, Magnesium Oxide Board/ MgO Board, Mineral Fiber Board and other ornament materials. Our factory located in Outlet of Shihuang Expressway, Jinzhou City, Hebei Province, China. Our team has abundant of experience in export, integrating our partner factories' production capability, R&D, and Quality Control. Welcome your visit and inquiry.
Product Name- Outdoor Aluminum Retractable Louvered Roof Waterproof RGB Lighting Modern Dimmable Rolling Roof Bioclimatic Pergola System Category- Home & Garden>Garden Supplies>Garden Buildings>Arches, Arbours, Pergolas & Bridge Place of Origin- TURKEY IZMIR Brand Name- SKY ART Model Number- SKY 015 Accepted payment type- T/T Delivery Time- 19 days Nearest Port- Izmir , �°stanbul , Mersin Attribute Name1: Name and Value- Aluminum Alloy AL6063 T10 Attribute Name2: Name and Value- Single or Double TEMPERED GLASS Attribute Name3: Name and Value- AISI304-INOX Fittings Attribute Name4: Name and Value- CLEANABLE Special System FOB Currency- USD Unit- Piece FOB Price/Unit- Get Latest price Minimum Order Quantity- 1 piece Product Description- "Rolling Roof Bioclimatic System can adjust the shading on your terrace thanks to their fully automatic smart lamellas. It offers full protection from direct sunlight, allowing as much sunlight as desired and full opening options. It allows you to regulate the natural ambient temperature when opened, and to create a water-resistant, fully enclosed environment when fully closed. It is the ideal option for use in hotels, private homes, restaurants, bars and premium entertainment venues. It offers different variations according to your needs. Adaptable to the architecture of your existing space or self-supporting installation variations can be provided. Its special design, which provides ease of installation, allows its assembly to be completed in just one day. With its materials made of aluminum and stainless steel, it is resistant to the negativities of time for many years. Wind Load Resistance Test UNE-EN 13659: 2004 Class 6 // (approx. 112 km / h) not tested up to 190 km / h. No breakage was detected. Snow Load Resistance Test Standard EN-1999 EUROCODE 9 // 100 kg / m�² (including its own weight) aluminum structures project Rain Test Standard UNE-EN 12056-3 // (0.03 l/s max) Fixed heavy rain approx. 108 l.m�²/h (structures + lamels) Finishes 10 years of warranty for finishes." Packaging and Shipping- As Per International Standard Shipping- International Shipping Exchange Policies- Free exchange for quality issues
