P.V.C pipes exclusively The distinguished adhesive (with specifications) and the first in the world in welding P.V.C pipes exclusively at the international elite The strongest welding of UPVC pipes Guarantee PVC pipe welding The packages are 1 kg 1005 grams, the half kg is 505 grams, and the quarter package is 260 grams I mean, you will take your right, net in grams, not like others, the kilo is 950 and the half is 450 grams And don't forget to see the gift coupon inside each carton Wait and order it now.
we want to shell product Adhesive for plywood type of product : 1. Urea Adhesive 2. Melamine Adhesive 3. Phenol Adhesive 4. Polyvinyl Acetate Min Order 20 Foot FOB Tg Perak
Product characteristics:1, sticky relay is particularly strong, fast, and easy to use, you can save viscose.2, the active ingredient agent concentration is high, covering large area of adhesive glue is 1-2 times the same glue.3, the spray particles are fine and uniform, thin paste material not wrinkle, penetration and corrosion of bottom material.4, with 15~20 minutes of bonding lead time, enhance work flexibility, improve work efficiency.
High Performance 2 component solvent-free, water cleanable, antifungal and anti-bacterial epoxy resin based adhesive and grouting system, which provides excellent adhesion and chemical resistance in medium and heavy duty corrosive and hygienic environments.
Ritver Wood Glue is water-based adhesive, based on polyvinyl acetate homopolymer, with excellent high tack and bond strength, developed for various wood applications, such as carpentry uses. Inc of bonding timber, MDF, Doors, Windows, in high-speed assembly lines at joineries. It is also useful for decorative to ply, block boards, tiles in dry condition. etc., The wood glue is not suitable for perpetual wet areas like toilets, kitchen sink etc., Virtues: It is a nontoxic and nonflammable water-based, environmental friendly single component
Providing you the best range of high temperature inorganic ceramic adhesive with effective & timely delivery.
Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement. One component formulation Good non-sag properties Short cut-off string Cold application Fast curing â?? Rapid strength development High mechanical performance High Modulus High initial bond strength Can be overpainted
Akfix G400 is a two component marble and natural stone adhesive based on polyester resin. Resistant to UV Resistant to alkalis and diluted acid solutions Temperature resistance of cured adhesive is between -10 C and +100 C Bonded surfaces are ready to be used after 2 hours No color change, cracking or shrinkage during hardening period
An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator. High bonding strength. Suitable for use on vertical surfaces as it will not drip or slump. It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
One-component, fast curing liquid polyurethane adhesive. It possesses high water resistance and bonding strength. Fast curing. Low press time. Transparent. Extremely high bond strength on numerous substrates. Conforms to D4 according to DIN EN 204. Easy to use. Very good resistance to chemicals. Excellent resistance to moisture and weather conditions. Nonshrinking. Low odour. Useable in slightly wet substrates.
PVA glue iAdPro 1051 is best used for cardboard, light wood, paper, and other such materials. It does form a strong bond, it dries quite quickly and remains flexible once dry.
It is good for paper lamination, cardboard to print, or lacquered carton, mainly used in Paper Core and general bonding of paper also.
Contact Adhesive is an extra-strong, quick-drying, e. It will repair a wide range of materials including wood, hardboard
WG 50 especially for binding wood. It also can you paper and corrugated boxes.
The multipurpose high polymer modified thin-set adhesive offering vast application for interior & exterior areas . It is comentitious power to be mix only with water to install various types of medium & large format tiles & stone on variety of substrates using thin-set compliance.
The double wall semi-rigid heat shrinkable end is composed of semi-rigid polyolefin and hot melt adhesive. The outer layer is radiation crosslinked polyolefin and the inner layer is hot melt adhesive. One end of the product has been pre contracted and sealed, which has double effects of insulation and sealing. It is used for mechanical protection, sealing, waterproof and moisture-proof and environmental protection of power cables, wires and harness ends. Product features shrinkage temperature: 80 Â Final shrinkage temperature: 125 Â Service temperature - 45 ~ 110 Heat shrinkable ratio: 4:1 Standard color: Black Voltage class: medium and low voltage power cable (35kV and below) Purpose: radiation crosslinking heat shrinkable sealing cap is suitable for the end waterproof, insulation and protection treatment of power cable or communication cable. The mouth end is coated with high-performance hot-melt adhesive. When heated, the sealing cap can shrink, and the glue melts. It is tightly bonded to the surface of the cable, playing an excellent waterproof, insulation and protection effect.
Description VOG is one component, premixed, modified polymer cement based tile adhesive used for bonding ceramic tile on the surfaces of wall, ground and floor. It is easily applied and can achieve an excellent adhesion. Where to use: - For wall surface: To bond ceramic tile (maximum is 60X60cm) on the concrete or cement sand rendering. - For floor and ground: To bond ceramic tile or building stone. Advantages - Stable performance, use directly after mix it with water; - Good flexibility - Nontoxic, non-radiant, no irritative odor; Application Surface Preparation: - The surface should be vertical, flat, smooth and free of dust, grease and other contaminants. Mixing Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture - VOG 25kg barrel required approximately 5 - 6,0 litres of clean water - VOG 5kg barrel required approximately 1 - 1,2 litres of clean water The mixed materials is immediately ready to use and should be used within 25-30 minutes after mixing. Storage Conditions: Keep in cool and dry places Packaging: 25kg/barrel and 5kg/ barrel SHELF LIFE: 09 months
* Convenient for all drywall joint repairing, filing and finishing works * Easier to apply and sand due to less weight (up to 25%) * Minimizes coats over corner bead thanks to less shrinkage * Net weight: 17L * Color: white powder * Drying time: 12-24 hours
DESCRIPTION: Water-resistant cement-based tile adhesive for fixing ceramic glazed tiles for both floors and walls for internal applications. It can also be used for external areas or fixing homogenous vitrified tiles, glass mosaic and natural stones when mixed with CMI Mortar Admix 380. USES: Fixing of ceramic tiles, glass mosaic, stones onto concrete slab, screed / render, RC walls, blockwall. For other areas not specified, please consult CMI Technical Representatives for more information.
BIRKOSIT Dichtungskitt, A single component sealing paste material of complete seal guarantee even for pressure up to 250 bar. Pressure resistance for flanges without sealing rings is guaranteed up to 450 bar, and even up to 550 bar for screw joints. It can be used with the support of a brush or else putty knife to dry the sealing surface on both sides with a temperature resistance of upto 900â?° C of natural gas. This material has a surface finishing accuracy of 0.8 microns to 1.2 microns. The surface life of this sealing agent is so good compared to many other sealing materials. You can get this item in a packing quantity of 1KG Tin which contains a storage life of 5 years if sealed properly.
