Applications: 1. Affixing, bonding, and sealing in construction: Exterior curtain wall, glass curtain wall, shelves, roof fixings, gutters, decks, frame joints, or structures subjected to vibrations. 2. Sealing and affixing usage in industry and automotive sectors. 3. Sealing of expansion joints, containers, and other aluminum elements. 4. Suitable for indoor and outdoor use, high performance for outdoor use. 5. Can be applied to damp surfaces. 6. Adhesion to most types of materials (glass, wood, marble, metal, cork, aluminum, porcelain. etc). 7. Suitable for assembling, sealing, and affixing. Characteristics: 1. Resistant to UV and atmospheric conditions. 2. Withstands vibrations. 300 % elasticity,Crack-resistant. 3. RTV: Room-temperature-vulcanizing silicone 4. High performance for Waterproof 5. Permanently elastic properties 6. Maximum load of 200 kg/50cm2. 7. No harm to Humans. 8. Neutral and small odor. 9. Available in white, black, and other colors required. 10. Content per unit: 300ml or 500ml and other packaging capacities
Applications: 1. Especially recommended for affixing and connecting heavy elements quickly without additional mechanical support. Triples the holding capacity of other adhesives. Strong and fast to fix all. 2. Suitable for indoor and outdoor use. 3. Much stronger than free nail glue. 4. Can be applied to damp surfaces. 5. Adhesion to almost all types of materials (concrete, ceramic, wood, metal, aluminum, copper, brick, stone, porcelain, etc Not recommended for PE, PP, and PTFE If the base material is unknown, tests must be done beforehand to ensure the product functions correctly Characteristics: 1. High Tack for bonding, 3.9 Mpa Strength, Maximum load about 500KG/50c 2. Neutral and odorless. 3. Can be painted. 4. Ecological (A and EnviroCert Certificates), No harm to Humans. 5. Solvent-free. 6. Water-resistant. Content per unit: 300 ml, 500ml, and Other packaging capacities required.
Applications: High transparency. Suitable for affixing and sealing glass, panes, acrylic, PVC, porcelain, Ceramic, and other transparent elements; Attaching of materials with a transparent or visible joint; Suitable for indoor use; Adhesion to almost all types of materials (concrete, wood, metal, cork, aluminum, PVC, copper, brick, stone, porcelain...). Not recommended for PE, PP, and PTFE; Suitable for assembling and affixing. Characteristics: Maximum transparency. 250 % elasticity, Permanent elastic properties Maximum load of 140 kg/50cm2. High performance for Waterproof Crack-resistant Neutral and odorless. Ecological (A, EnviroCert, and ISEGA Certificates). Solvent-free. Water-resistant. Content per unit: 300 ml, 500ml, and other packaging capacities
Thermoplastic Toe Puff & Counter Material Also named as Nonwoven Hot Melt Quality: SEXE#, SEXH#, SGHX#, SGHG#. SEXE# & SEXH# can compare well with the ones offered by European manufacturer in excellent cost-performance. Thickness: 0.60MM-2.50MM Size: as per negotiation. Max Width: 1.00M Application: heat-bonding for shoesâ?? toe puff & counter, also to be used in the padding of cover & bags & boxes & cap tongue etc. Public by J. Z. Industry & Trade Co., Ltd, a leading & professional manufacturer of shoes material
Ping Pong Hot Melt Also named as Thermoplastic Ping Pong Quality: RNTA# & SNTS#. RNTA# is a rigid & non-tear-up & excellent flexibility quality which is operated in low temperature. To support the high quality fashion shoes & business leather shoes who is using expensive leather and needing its nice shape-setting. SNTS# is soft quality to support the sport shoes & casual shoes which is operated in low temperature. Thickness: 0.40MM-1.00MM Size: as per negotiation. Max Width: 1.00M Application: heat-bonding for shoesâ?? toe puff & counter. Public by J. Z. Industry & Trade Co., Ltd, a leading & professional manufacturer of shoes material
Packaging Sizes: DUNLOP LP 65ML - 240TINS x 65ML / DUNLOP LP 250ML - 40TINS x 250ML / DUNLOP LP 900ML - 30TINS x 900ML / DUNLOP LP 3L - 10TINS x 3L MOQ: FCL 20ft (can be mix but each variant minimum order is 40 CTN) Shipping: Sea Freight
MOQ: 1000 Bags Shipping: Sea Freight
Item No.NRTG017 Material Aluminium Tube+Glue Size 100g/135g Target Pest Mice;Rats Packing Details 1pc/box;100pcs/ctn N.W 13kgs G.W 14kgs Carton Size 41*28*41cm Aluminium Tube Mouse and Rat Glue Tube Sticky Trap Stop Mice Rats tubo de pegamento para ratas Aluminium Tube Mouse and Rat Sticky Glue Trap Tube pegamento para ratas tubo de pegamento para ratas tube de colle de rat Rurka kleju szczura klej szczura The Tube and Box Customized Design are Available!!! Please Contact us for Details Now!!! Features: 1.Strong adhesive, no escape once be trapped. 2.We use the high quality adhesive, this kind of glue won't dry no matter exposure or rain. 3.Non-toxic,odorless, harmless and eco-friendly. 4. Multi-functional - these glue traps are also suitable for trapping cockroaches or other insects.
Our polyurethane adhesives are widely used in the bonding of product particles in the production process of shoe materials, cork, rubber mats, wine stoppers, recycled sponges and rubber racetracks.
BiaoYuan Tile Adhesive (Semi-Flexible) is high quality polymer modified cementitious adhesive designed for fixing homogeneous tiles, ceramic tiles and stone tiles for interior and exterior applications. BiaoYuan Tile adhesive have white and grey colors . Usage: 1:Suitable for fixing porous tiles as well as vitreous tiles with low water absorption. 2:Ideal for fixing homogeneous, porcelain, ceramic and mosaic tiles. 3:For interior and exterior applications onto walls and floors. Feature: 1:Water and frost-proof 2:Reduced slip and high tack 3:High tensile strength and pressure 4:Complies with European standard EN 12004: 2007+A1:2012 for type C2T
We are the Mfrs of Glue Removers such as Super Glue Remover, Hair Wig Glue Remover, Sticker Remover, Decal-Velcro Remover, Glass Cleaners, Perfumes without Acetone or harmful chemicals, Loca Glue Removers...etc.
ParameterPacking adhesive YX-101A Solid content50%-60% PH4-6 AppearanceWhite milky liquid Product applicationG.D.X1, FOCKE 350 Suitable machine speed 400 Packets/minute Features: Our packing adhesive has good adhesion to difficult to adhere materials, and good rheological properties make it run smoothly and cleanly on the machine. Super Sticky relay, whether it is golden film or laser transfer packaging materials. Application: Excellent mechanical properties, suitable for all kinds of roll coating and spraying system. It is suitable for import and domestic cigarette packing machine. Certification: ROHS(EU)2015/683, EN14372:2004
LC1001 is the semi-flowing heat-resistant silicone adhesive sealant which is made of special silicone rubber material the addition of thermal powders. With excellent conductivity,V0 flame retardant grade, excellent temperature resistance, can be in the range of 60 ~ 280 Long-term use. As well as good adhesion, long term use will not fall off, will not produce Contact gap to reduce thermal conductivity, moisture-proof, anti-seismic, anti-corona, anti-leakage and aging .The properties are widely used for the adhesion and sealing of the electronic components with high thermal conductivity, which is a single part of the acetone oxime type, It can be cured silicone rubber and conforms to the requirements of ROHS REACH UL. Typical Applications High power LED lamps and lanterns, electrical power, microwave oven, electronic components and other industrial products of thermal conductive adhesive sealing, alternative thermal conductive silicone used in high-power electric module and radiator thermal conductivity between fixed filling adhesive, no card buckle screw, more reliable filling heat, simple process and lower cost. Applying Process 1.Surface clean : Clean the surface of the adhesive object and remove the rust, dust and oil. 2.Sizing: Twist the cap of the hose, squeeze the gel into the clean surface, and make it natural. 3.Curing: Place the bonded or sealed parts in the air while them to solidify naturally. Curing is a process from surface to the internal, within 24 hours (at room temperature and 55% relative humidity) will cure the depth of the 2 ~ 4 mm, if the site location is deeper that completely curing time will be postpone, especially it is not easy to come into contact with air. if the temperature is low, cure time also will be postpone .Prior to further processing or wrapping the bonded parts, it is recommended that the user wait long enough to ensure that the adhesion and integrity of the adhesion are not affected. For more , please kindly feel free to contact
Fast dry PVA glue Appearance:milky white viscous emulsion Solid content:32-33% Viscosity:40000-60000cps PH:4-6 Feature:Good for brushing,quick dry speed,high bond strength Usage:For general boad bonding,include MDF board laminated,multilayer board bonding etc.
Product details : 1. Product number: fn19 2.Color: clear&pink 3.Copacity : 5gram Moq: 300pcs Packing&delivery: 1.Package:100pcs/box 2.Delivery time: 3-7days by express Usage: cleaning the surface of finger nails, and then apply the glue on it, stick the artifical nails in 3-15seconds. Contact the water after 48hours with the best strength. Attention: 1.Keep away from children.Avoid contact with eye and skin., if contact occurs, flush with warm water and seek for medical attention.Refer msds before use. 2.Store in cool and dry and no direct sunlight condition at (20â??or 0â??), shelf life 12 months.
Product details : 1. Product Number: 1004 2.Color: clear 3.Copacity : 1gram MOQ: 300pcs Packing&delivery: 1.Package: Aluminum tube, 1pc with Aluminum Foil Bag, 100pcs/box , 20boxes/carton 2.Delivery time: 3-7days by Express Usage: Cleaning the surface of finger nails, and then apply the glue on it, stick the artifical nails in 3-15seconds. Contact the water after 48hours with the best strength. Attention: 1.Keep away from children.avoid contact with eye and skin.,if contact occurs,flush with warm water and seek for medical attention.refer MSDS before use. 2.store in cool and dry and no direct sunlight condition at (20or 0),shelf life 12 months.
FC2 individual odorless eyelash glue Suitable for grafting by yourself Professional GMP working room for medical grade, solvent free and environmental standard odorless,non-stimulating,non-irritating,strong and fast cure adhesive,non-toxic and lasting *Instruction*: 1. Using the eye mask to protect your eyes. 2. Use the eyelash clip to Shape your eyelash. 3. Put the false eyelash on a paper. 4. Clip the false eyelashes; apply some eyelash glue to it. 5. Each hand with a clip, bond the false eyelash to the natural one. 6. We suggest that use our glue remover when remove the eyelash glue. HANDLING AND STORAGE Handling: . Avoid contact directly with skin, eyes and Steam inhalation. Storage: The glue should be stored under dry and low temperature(The glue quality will be more stable under dry with 0â??),it will be very bad if you stored the glue over 25â?? beyond 60days. Please kindly store the glue under air-condition room with 25â?? if you do not have refrigerator. And you should catch the glue out of refrigerator in half hour before using, and wipe the water away around the bottle, or the glue will be bad quickly if contact with water. *Factory Superiority Developing higher quality and strictly control the production according to the customerâ??s requirement and global environmental protection regulations. Advance Technique: â??Odorlessâ?� and â??HQ Freeâ?� Cyanoacrylate Nontoxic, Harmless (ROHS, REACH,HQ testing report and certification) Developing : Cooperation with University and equipped with independent Labs and development team Longer Shelf life and steady strength within the shelf life(6 month~3 years shelf life) â??GMPâ?� Working Room for the whole production processes Informationize office work & management and distance control the situation of the production and quality processes with video Longer shelf life for 6 months~3 years or above for your selection. Our goal for production is Not only did, but well done, which have come up to 100% full testing so that difficult to find a empty tube or less weight product in a whold container. Difficult to find a leaked or faild glue, the Quality Passing Rate is above 99% which is our absolute advantage in the same field. Harmless and Nontoxic Adhesive(Free of chloroform, dichloromethane, Benzene,toluene, xylene and toxic solvent), Solid content come up to 99.999%, Strength come up to 18-22MPA which is higher twice than some of the same industry thatâ??s also our absolute advantage. The strength of our adhesive will not weak as the time passes if itâ??s still in the shelf life. But the glue strength from some of other factories is always weaken in the harf of the shelf life. We guarantee that itâ??s almost no quality problems if we established the coopeartion which need our strictly production and quality control and management cost.
Product name :Ceramic Tile Adhesive Unit price : 5.5USD/Bag FOB Tianjin port . Packing: 20Kg/Bag,25MT/20FCL Country of origin :China
H3 is paste big tile and wall tile Unit price : 6usd/bag fob tianjin port . Packing: 20kg/bag, 25mt/20fcl Country of origin :china
H1 is paste Small tile and floor tile Unit price : 5.2USD/Bag FOB Tianjin port . Packing: 20Kg/Bag,25MT/20FCL Country of origin :China
