SECrosslink-7503 fast curing, single component, weldability - meets weldability and weldability test, excellent contact resistance, high adhesion, suitable for screen printing process, used in photovoltaic solar energy and other electronic fields. (HJT solar battery) Brand SECrosslink Type SECrosslink-7503 Product name HJT silver paste Resin type epoxy Appearance Silver gray Application HJT solar paste Density 4.6g/cm3 Adhesive force excellent Silver content 91% Volume resistivity < 7 ©*cm Silver content Cured paste 99.5% Peeling strength 1.5 N Thermal conductivity 156 w/mK Usage T -30 - 300
SECrosslink-7800 low-temperature sintered type, weldable, suitable for glass electrode, ceramic thermal resistance and other areas requiring extreme temperature resistance. Brand SECrosslink-6 Type SECrosslink-7800 Sintering temperature 650 Resin epoxy Silver content 91% Viscosity 40000cPs Volume resistivity 9 ©*cm Usage temperature -30 - 800 Adhesive force excellent Feature Low temperature sintering, high adhesion, good electrical conductivity
At-701s is a kind of styrene acrylate synthetic latex, which has good bonding performance on the back of ceramic tile, vitreous brick and marble brick. AT the same time, the product has excellent bonding strength after immersion and fast drying speed, especially suitable for making ceramic tile back coating. Appearance milk white liquid Solid content:52-53% PH :7.0-9.0 Viscosity :500-1000 cps (3#60/25 Particle size :0.1-0.2 micron MFT: 0 Ion features: anion Use :At-701S is a water-based emulsion used for gluing the back of ceramic tiles. It has excellent adhesion properties for ceramic tiles, glass tiles and marble tiles.
Polyurethane Adhesive · CRISTOFIX PU 9: Single component PU Adhesive.
It is two-component, elastomeric system, 100% solvent free and 100% solid material. The product is aromatic and very resistant against weathering aging (excluding optical discoloration that occurs by time). Applied product gives seamless monolith surface. High UV resistance. It does not flat joints and grouts as it takes the shape of the surface.Product Advantages It includes all features of water-proofing, anti-rust and last coat of paint It is applied very fast (one labor / 1 hour / 250 m²) It is used as a thin layer (2-3 mm) Curing time is 40 seconds Surface is seamless and compact It is very resistant to abrasion Excellent chemical resistance to the wide range of common chemicals Coating of any thickness is done in one shot - no need for stratified application It can be applied on all construction materials. Application temperature range is very wide (0-80 ° C)and even It can be applied when air humidity is 100% Necessary condition is that the dew point is above surround temperature It has an excellent thermal shock resistance (-40°C - +200 °C) Surface can be put in exploitation 24 hours after application. It is long-lasting (approximately 25 - 50 years).
Hightite® line of instant adhesives are available in a variety of viscosity, curing speed, gap-filling capability and substrate compatibility. Used for fast bonding many materials such as metal, rubber, plastic, glass, leather, wood, ceramic etc. W401 Colorless low viscosity, universal type,apply for wide range of materials surface, including electroplate or porous substrate surface. 90 10 20 -54~+121 20ml 500ml W403 Colorless to paste yellow liquid low albefaction,low odor,high viscosity, suitable for requiring high aesthetic appearance. 1200 40 20.3 -54~+93 20ml 500ml W406 Colorless lower viscoisity,used for plastic and rubble fast bonding, including EPDM or other elastomer. 17 15 15.5 -54~+121 20ml 500ml W460 Colorless to paste yellow liquid low viscosity, low albefaction and odor.suitable for requiring high aesthetic appearance. 40 50 30 -54~+93 20ml 500ml W495 Colorless to straw color universal type, wide range for various kinds plastic and metal bonding. 33 20 14.2 -54~+121 20ml 500ml W4204 Colorless to straw color resistance to high temperature and shock, used for loundspeaker assemble. 4000 60 19.3 -54~+121 20ml 500ml W480 Black black toughened adhesive, used for rubble materials bonding, slow curing. 150 90 30 -54~+121 20ml 500ml
Hightite HT8621 is a one component heat curing epoxy adhesive. Suitable for screen printing. This product has excellent heat resistance, excellent moisture resistance and adhesion strength, electrical properties, has good storage stability. 1. HT8621 is a one component heat curing epoxy adhesive. 2. This product has excellent heat resistance, excellent moisture resistance and adhesion strength, 3. Electrical properties, has good storage stability. 4. Mainly used for STM bonding components. 5. Before using the adhesive must be returned to room temperature,dont open the package to prevent adsorption of moisture in the air and affect the using. 6. .Recommendation printing speed 20-150mm/s; scraper force 3-4N/cm;Take off the plate speed is 0.1-3.0mm/s. 7. Factory directly, low price, OEM service. 8. Free sample.
poxy resin glue is epoxy fiber adhesive of high performance, can be used for the effective penetration bonding between many substrate materials, such as concrete, steel material, ceramic, stone, wood component and many fiber plate such as carbon fiber plate, basalt fiber plate, glass fiber plate etc. It is mainly used for the strengthening and reinforcement of buildings, bridge and civil construction. Classification: Double components adhesive Mixing Ratio: 2:1 (A:B) Viscosity: 4000-6000 Pa.s Appearance: Viscous Liquid Color: White & Black Uses: Construction, Fiber & Garment, Footwear & Leather, Packing, on concrete substance etc.
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized Cap option: small screw up, big screw up cap, flip top cap etc. Printing : 1, 6 color offset printing Sample time Samples can be finished around 15 days after payment and artwork's final approval. Payment term Magnetic T/t, 30% down payment, 70% before shpt. Quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state, of, the, art, high, speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation.
Technical specifications of conductive adhesive tape Shield efficiency,impedance of clip measurement are the best,it can be used for the high Radiation instruments of electronic industries,medical industres,electromagnetism,special shield cloth of shield room and special cloth of shield parts in IT industry.
Livingstone,Smartpalette,Corian,staron,Hi-Macs(LG),Hanex, Avonite,Tristone, B.A.S.M, GLD, Formica, Avonite, Livingstone, adhesive.
Caesarstone, Silestone, Cambria, Zodiaq, best floor, Avanza, Cimstone, Compac, Hanstone, Okite, PKS stone, Quarella, Technistone, Viatera(LG), Radianz, Vicostone adhesive.
Product Description: DUBOND S PEAK is a no slip, high adhesion quartz adhesive. It can be applied upto 10 mm bed thickness. High dispersion copolymers hydraulic binders composed of only cement clinker in PEAK provides rheological mixture for a prolonged stability. It serves purpose of high resistance laying on flooring and wall of ceramic and homogeneous tiles and glass mosaic on cement based substrates.
Acrylic surface adhesive eg: Corian,Staron,Avonite,LG Hi macs,Hanex Tristone etc The introduction of adhesive CHMA805 is dual-component, 10:1 ratio, 100% reactive adhesive, designed for seaming and jointing acrylic solid surfaces and other surfacing materials containing densified polyester sheet, thermoplastic plastic, grp, aluminium alloy. Acrylic surface adhesive eg: Corian,Staron,Avonite,LG Hi macs,Hanex Tristone etc The feature Strong bond performance CHMA805 adhesive exhibits superior bond strength on acrylic solid surface. Faster cure at room-temperature It features a working time of 8-13minutes, cure time of 20-25 minutes and can Be sanded after 25minutes. Create seamless joints Advanced bonding strength and various surfacing colors assist the fabricators To produce virtuallly invisible joints on bonded surface. Custom colors available Extensive colors available and all brands of acrylic solid surfaces colors can be Designed and formulated. Excellent performance It is uv stable and enronmental friendly for all articles are comply with european Commission directive. It has excellent resistance to wear, impact, water, oil and High temperature. Acrylic surface adhesive eg: Corian,Staron,Avonite,LG Hi macs,Hanex Tristone etc Supplied in ready-to-dispense cartridges 50ml dual cartridge&two mixing tips /per set 75ml dual cartridge&two mixing tips/per set 250ml dual cartridge&two mixing tips/per set Reduce labor and time with dispensing accossies Manual applicator gun & motionless mixing tip Long shelf life : 24 MONTHS It can be stored for one year from shipment day. Provide adhesives for private label customers Acrylic surface adhesive eg: Corian,Staron,Avonite,LG Hi macs,Hanex Tristone etc Standard export package.50ml dual-cartridge , 75ml dual cartridge 250ml dual-cartridge
No Yellowing Acrylic Solid Surface eg: Corian,Staron Strong bond performance No Yellowing Acrylic Solid Surface eg: Corian,Staron exhibits superior bond strength on acrylic solid surface. Faster cure at room-temperature It features a working time of 8-13minutes, cure time of 20-25 minutes and can Be sanded after 25minutes. Create seamless joints Advanced bonding strength and various surfacing colors assist the fabricators To produce virtuallly invisible joints on bonded surface. Applicator guns Handguns are very convenient and are desired in most situations, these are high quality professional tools that will provide years of service Static mixer tips Static mixer tips are attached to the tip of the cartridge, and as the gun handle is depressed, glue and activator are extruded out of the 2-part cartridge, where they are mixed thoroughly in the static mixer tip as the two materials are driven through the tip. After passing through the static mixing tip, the fully mixed glue is dispensed at the tip of the static mixer tip. No Yellowing Acrylic Solid Surface eg: Corian,Staron The introduction of adhesive Chma600 is dual-component, 10:1 ratio, 100% reactive adhesive, designed for seaming and jointing acrylic solid surfaces and other surfacing materials containing densified polyester sheet, thermoplastic plastic, grp, aluminium alloy.
Chloroprene Rubber, Sythentic or Epoxy Resins, Polyisocynate, Polyvinyl Acetate, and etc.
Melt Adhesive (APAO, EVA, Polyster, Polyamide, PUR, and TPE)
Dry film photo resist for electronic components
Liquid film photo resist for electronic components
Polyurethane Dispersion
