No.96 is a pressure sensitive adhesive with aggressive tack,it provides permanent bond,suitable for bonding plastic,foam padding,electronics component,leather and polypropylene to many other material like fiberglass,plastics,particle board,hardwood etc.With its eco-friendly and advanced formula,it is appreciated by customers.
Volum 550ml Weight 450g Packing 24pieces/carton Effect time 30-60seconds Viscosity 3000-3500mPa.s/25â?? Shelf Life 24months Spray Pattern Mist Service OEM&ODM Composition No CFS Advantage Vacuum infusion adhesive Temperature Resistance -30 to 65 Bonding Temporary Keep Tacky 60minutes White Clear
Hebei Suna Technology Co., Ltd. was founded in 2002ï¼?Our main products includes HPMC, HEMC,� RDP,� HEC,� PVA, CMC, Inorganic Pigment, Titanium Dioxide, and so on. Please contact with me if you are interested in our products.
HPMC For Tile Adhesive HPMC for Tile Adhesive HPMC for tile adhesive contains other additives such as cement, sand and limestone, which can increase the adhesion of tile ceramics. Tile adhesive is a new modern decorative material used to paste tiles, face tiles, floor tiles and other decorative materials. There are many kinds of additives in tile adhesive, but usually cellulose ether additives are added to tile adhesive to improve water retention, thickening effect and open time. Construction grade hydroxypropyl methyl cellulose is widely used in building grade. For example, tile bonding, tile mortar. Advantage HPMC cellulose has many characteristics, such as thickening, water retention, dispersion, emulsification, film formation, adhesion, gelation and adsorption. The HPMC has good effect in tile adhesive, It can be improved the Anti-Slip, water retention, opening time, viscosity and strength of tile adhesion. Due to its high water performance, hydroxypropyl methyl cellulose does not need to be pre-soaked or wetted with tiles and substrates, which can significantly improve the bonding strength. The slurry can be constructed in a longer period, and the construction is convenient and uniform. It is delicate and has good anti-slip performance. HPMC with a thickening, binding, dispersing, emulsifying, PH value of stability, film, suspension, adsorption, gel, surface activity, maintain a features such as water and protective colloid. 1. Enhance water retention characteristics and extend working time. 2. Improve the bonding strength of tile adhesives. 3. Improves flexibility and deformability of the caulk. 4. It can enhance the sag resistance of tile adhesives. 5. Good bond strength, both thick and thin, with reduced shrinkage and tiles that do not crack or fall under stress. 6.Mortar has better malleability and flexibility, which makes construction easier and work more efficient. For more information, please visit our website.
We Supply cold vulcanising solutions for conveyor belt joining / rubber to rubber bonding. Rubber lining etc. We have make Germany & India Origins in bulk quantities. COLD BONDING SOLUTIONS !! COLD VULCANISATION MOQ: 20 ft container or LCL shipments accept GCC or worldwide
100-250 ml. Suede & Nubuck Spray Patented design with Soft Brush Smart Suede & Nubuck Renovator Spray with argan oil helps keep your suede & nubuck leather goods looking new longer. It provides your suede & nubuck with nourishment and protection. It prevents adhered Suede & Nubuck nap with its own brush while giving them proven long-lasting water protection
DB118 This product is a one-component epoxy resin adhesive with high thermal conductivity, which is the best matching adhesive for thermal bonding of chips. Applicable to all kinds of electronic products, characterized by rapid thermal curing, and easy to apply. Upon cure, it has high bonding strength, good thermal conductivity, low shrinkage, low moisture absorption, good insulation performance, etc., which can reduce the working temperature of the chip, extend the life of the chip
DB3030 This series of products have high structural bonding strength. In the shear strength test in the laboratory, the bonding property of this product is stronger than that of steel strip. The product is an epoxy adhesive that can firmly bond wood, metal, thermoplastic, glass fiber and composite components. The product has the functions of chemical corrosion resistance, salt corrosion resistance and high temperature resistance of 150 . Application: Structural bonding; automotive, marine, communication equipment
DB736 DB740 This product is a one-component, medium temperature fast heat curing modified epoxy resin adhesive. Excellent adhesion between many different types of materials. The product has excellent working performance, good high temperature resistance, low curing shrinkage, blister resistance, water boiling resistance and excellent sealing performance.
Hello TILE FIXING GLUE i believe this new opportunity will fit your interest. We look forward to sharing, Success with you.
mastic glue silicone glue silicone adhesive mastic glue
Rubber Adhesive HMMM / Rubber Adhesive GLR-801 / Rubber Adhesive CYREZ 963 Overview: 1. Chemical name: Hexamethoxymethylmelamine (HMMM) 2. Chemical family: Methylated melamine-formaldehyde resin, melamine resin 3. CAS No.: 3089-11-0 Technical Specifications: Appearance: Colorless transparent liquid. Density: 1.20 Formaldehyde content % min.: 40 Free formaldehyde content % max.: 0.5 Viscosity: 2000~5000 Heating loss % max.: 1.0 Application: 1. It can promote adhesive force to rubber and steel cord or fabric cord. 2. Suggested ratio: 1.5-3 poses rubber adhesive HMMM, 2-5 poses resorcinol formaldehyde resin or other methylene acceptor. Packaging and storage: 1. In standard IBC drum lined with plastic film, net weight: 1.1MT/drum. 2. Shelf life is one year.
Rubber Adhesive RA-65 / Rubber Adhesive HMMM-65% / Rubber Adhesive GLR-806 / Rubber Adhesive CYREZ 964 / Rubber Adhesive HMMM Overview: 1. Chemical name: Hexamethoxymethylmelamine (HMMM) 65% + inert carrier (white carbon black) 35%. 2. Chemical family: Methylated melamine-formaldehyde resin, melamine resin 3. CAS No.: 3089-11-0 Technical Specifications: Appearance: White powder Ash content (850deg): 29~35 Water content % max.: 4.5 Sieve residue (325 mesh) % max.: 0.3 Free formaldehyde content % max.: 0.1 Application: 1. It can promote adhesive force for rubber and steel cord or fabric cord. 2. Suggested ratio: 2-5 poses Rubber adhesive RA-65 with 2-5 poses resorcinol formaldehyde resin. Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Shelf life is one year.
1.Product Name:hot melt glue sticks full size2.Product, Description,(1) CAS NO:24937-78-8, 69430-35-9 9002-88-4 , (2)HS CODE:3506919090(3)CHROMA:100% Clean White(4)R&B SOFTENING:85,±5,(5)OPENING TIME:30~45S(6)CURING TIME:5~8S(7)BROOKFIELD VISCOSITY 150 ,............................................19500 CPS160 ,............................................15000 CPS180 ,............................................ 12000 CPS(8)INITIAL ADHESION TEST:, Steel Ball(9)USAGE:Electronic,Handcraft ,Toy,Carton packing,Metal,Plastic,Box,Website:,ETC.(10)Characteristic:high viscosity,Non wire drawing,Cold-resistance,No loss of viscosity, etc.(11)RECOMMENDED APPLICATION TEMPERATURE:160,-190,(12)PEEL OFF, TEST:48 N/CM(13)HEAT- RESISTANT TEST:-15, + 85 ,(14)STORELIFE:ONE YEAR(15)Factory
PS-SAFE23 has unique feature as it can stick the styrofoam material. It does not contain toluene and formaldehyde that contribute to smog in cities and industrial area. This is the only contact adhesives with 36.5% solid. It's cost effective with the highest active ingredients. PS-SAFE23 is made of tough elastomeric rubber, tackifying resins and solvent with least odor without toluene . Unique feature as it can adhere the styrofoam material Strong grab on contact with higher green strength Excellent water resistance as it immersed in water for 3 months without adhesion failure. Very Low odor without toluene and MEK
Description CS-264 is the latest innovative Contact adhesive using our home-grown technology. This is the only Contact adhesives with 50% solid. It's cost effective with the highest active ingredients. Less solvent less health hazard. CS-264 is made of tough elastomeric rubber, tackifying resins and solvent with least odour without toluene. Features Faster sticking Contact Adhesive within 5 minute. Strong grab on contact with higher green strength. Paintable when dried. Easy to extrude even at -15 C , most suitable for all season. Very Low odour without toluene.
DESCRIPTION CC-301(54) is 1 K aromatic moisture curing PU adhesives, it can be used as a waterproof primer for cement. CC-301(54) has excellent bonding strength, weather resistance, hydrolysis resistance after fully curing. (about 3 days. ) TECHNICAL DATA Appearance : light yellow transparent liquid Component PU : pre-polymer Viscosity : 700-900 cps Solid Content : 100% Shelf Time : 6 months OPERATION 1. Put CC 301(54) onto the cement, then used a roller to coat on the cement. 2. After first coating has already tack free (about 1 hour), the second coating can be applied immediately. 3. After fully curing ( a bout 8 24 hours), the top coating can be applied.
Description CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology. Features Paintable easily with wb coating Easy to use Smooth to tool with trowel Non-sagging Stronger adhesion High solid by volume; 100% water resistant when cured. Low odor VOC free / Solvent free Uses Gypsum boardCalcium silicate board Fiber cement board Plywood / Timber Concrete / Tile It may be suitable to use on other substrates not mentioned above. Application 1. The surface to be adhered must be free of dust, release agent, oil and grease 2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as indicated by uniform color. 3. Do not stir or mix the two parts on the application surface.
Description CS-261 is a acrylic sensitive adhesives. It has good initial tack, suitable for the adhesion of PVC tile. It is easy to use. Application CS-261 can be used in decoration, PP to paper,PVC to non-woven fabrics industry.
Tielo New Construction Tile Adhesive meets the requirements of IS 15477 (Specification for tile adhesive for ceramic and mosaic tiles). Easy application:- single component, ready to use mixture consisting of white cement, crystel and special additives. excellent adhesion and slip resistance.
