No.81 is specially designed for applique on baby clothes,underwear,white fabrics,toys and other high -end temporary bonding.It meets REACH standard,no chlorinated solvents,formaldehyde free.It can remain tacky for 45 minutes,long open time for repositioning.
No.96 is a pressure sensitive adhesive with aggressive tack,it provides permanent bond,suitable for bonding plastic,foam padding,electronics component,leather and polypropylene to many other material like fiberglass,plastics,particle board,hardwood etc.With its eco-friendly and advanced formula,it is appreciated by customers.
Hebei Suna Technology Co., Ltd. was founded in 2002ï¼?Our main products includes HPMC, HEMC,� RDP,� HEC,� PVA, CMC, Inorganic Pigment, Titanium Dioxide, and so on.
Please contact with me if you are interested in our products.
HPMC for Tile Adhesive
HPMC for tile adhesive contains other additives such as cement, sand and limestone, which can increase the adhesion of tile ceramics. Tile adhesive is a new modern decorative material used to paste tiles, face tiles, floor tiles and other decorative materials. There are many kinds of additives in tile adhesive, but usually cellulose ether additives are added to tile adhesive to improve water retention, thickening effect and open time.
Construction grade hydroxypropyl methyl cellulose is widely used in building grade. For example, tile bonding, tile mortar.
Advantage
HPMC cellulose has many characteristics, such as thickening, water retention, dispersion, emulsification, film formation, adhesion, gelation and adsorption. The HPMC has good effect in tile adhesive, It can be improved the Anti-Slip, water retention, opening time, viscosity and strength of tile adhesion. Due to its high water performance, hydroxypropyl methyl cellulose does not need to be pre-soaked or wetted with tiles and substrates, which can significantly improve the bonding strength. The slurry can be constructed in a longer period, and the construction is convenient and uniform. It is delicate and has good anti-slip performance. HPMC with a thickening, binding, dispersing, emulsifying, PH value of stability, film, suspension, adsorption, gel, surface activity, maintain a features such as water and protective colloid.
1. Enhance water retention characteristics and extend working time.
2. Improve the bonding strength of tile adhesives.
3. Improves flexibility and deformability of the caulk.
4. It can enhance the sag resistance of tile adhesives.
5. Good bond strength, both thick and thin, with reduced shrinkage and tiles that do not crack or fall under stress.
6.Mortar has better malleability and flexibility, which makes construction easier and work more efficient.
For more information, please visit our website.
2164 Glues Adhesives Suppliers
Short on time? Let Glues Adhesives sellers contact you.
We Supply cold vulcanising solutions for conveyor belt joining / rubber to rubber bonding. Rubber lining etc. We have make Germany & India Origins in bulk quantities.
COLD BONDING SOLUTIONS !! COLD VULCANISATION
MOQ: 20 ft container or LCL shipments accept GCC or worldwide
This product is a one-component epoxy resin adhesive with high thermal conductivity, which is the best matching adhesive for thermal bonding of chips. Applicable to all kinds of electronic products, characterized by rapid thermal curing, and easy to apply. Upon cure, it has high bonding strength, good thermal conductivity, low shrinkage, low moisture absorption, good insulation performance, etc., which can reduce the working temperature of the chip, extend the life of the chip
DB3030
This series of products have high structural bonding strength. In the shear strength test in the laboratory, the bonding property of this product is stronger than that of steel strip. The product is an epoxy adhesive that can firmly bond wood, metal, thermoplastic, glass fiber and composite components. The product has the functions of chemical corrosion resistance, salt corrosion resistance and high temperature resistance of 150 . Application: Structural bonding; automotive, marine, communication equipment
This product is a one-component, medium temperature fast heat curing modified epoxy resin adhesive. Excellent adhesion between many different types of materials. The product has excellent working performance, good high temperature resistance, low curing shrinkage, blister resistance, water boiling resistance and excellent sealing performance.
PS-SAFE23 has unique feature as it can stick the styrofoam material. It does not contain
toluene and formaldehyde that contribute to smog in cities and industrial area. This is the only contact adhesives with 36.5% solid. It's cost effective with the highest active ingredients. PS-SAFE23 is made of tough elastomeric rubber, tackifying resins and solvent with least odor without toluene .
Unique feature as it can adhere the styrofoam material
Strong grab on contact with higher green strength
Excellent water resistance as it immersed in water for 3 months without adhesion
failure.
Very Low odor without toluene and MEK
Description
CS-264 is the latest innovative Contact adhesive using our home-grown technology.
This is the only Contact adhesives with 50% solid. It's cost effective with the highest active
ingredients. Less solvent less health hazard.
CS-264 is made of tough elastomeric rubber, tackifying resins and solvent with least odour without toluene.
Features
Faster sticking Contact Adhesive within 5 minute.
Strong grab on contact with higher green strength.
Paintable when dried.
Easy to extrude even at -15 C , most suitable for all season.
Very Low odour without toluene.
DESCRIPTION
CC-301(54) is 1 K aromatic moisture curing PU adhesives,
it can be used as a waterproof primer for cement.
CC-301(54) has excellent bonding strength, weather resistance,
hydrolysis resistance after fully curing. (about 3 days. )
TECHNICAL DATA
Appearance : light yellow transparent liquid
Component PU : pre-polymer
Viscosity : 700-900 cps
Solid Content : 100%
Shelf Time : 6 months
OPERATION
1. Put CC 301(54) onto the cement, then used a roller to coat on the cement.
2. After first coating has already tack free (about 1 hour), the second coating can be
applied immediately.
3. After fully curing ( a bout 8 24 hours), the top coating can be applied.
Description
CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which
does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology.
Features
Paintable easily with wb coating
Easy to use
Smooth to tool with trowel
Non-sagging
Stronger adhesion
High solid by volume; 100% water resistant when cured.
Low odor
VOC free / Solvent free
Uses
Gypsum boardCalcium silicate board
Fiber cement board
Plywood / Timber
Concrete / Tile
It may be suitable to use on other substrates not mentioned above.
Application
1. The surface to be adhered must be free of dust, release agent, oil and grease
2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as
indicated by uniform color.
3. Do not stir or mix the two parts on the application surface.
Tielo New Construction Tile Adhesive meets the requirements of IS 15477 (Specification for tile adhesive for ceramic and mosaic tiles). Easy application:- single component, ready to use mixture consisting of white cement, crystel and special additives. excellent adhesion and slip resistance.
Tielo Universal Gold Tile Adhesive is a cementations material in powder form composed of cement, chemicals & send, which only needs on site addition of water to make a mortar which is used for fixing tile over any cementation surface or on existing mosaic tiles without removing them, Tielo Universal Gold Tile Adhesive is also used for fixing tiles on difficult surface also.
Tielo Universal Tile Adhesive is a cementations material in powder form composed of cement, bonding chemicals & send, which only needs on site addition of water to make a mortar which is used for fixing tile over any cementation surface. Tielo Universal Tile Adhesive is mainly used for fixing glazed, ceramic, terracotta tiles & vitreous tiles etc
Laminates of fabrics, and fabrics with other substrates, are a recent development in the long history of fibers, textiles and fabrics. Woven cloth has been known since antiquity; fabric laminations have become widely used only in the past forty yearswith the development of synthetic fibers and the adhesives needed to provide functional bonding.
End uses range from the purely decorative, as in a variety of fashion applications, to the highly functional as, for example, in the fabric/film composite increasingly used for industrial, agricultural and marine coverings. The range of substrates and the diversification of end uses grows constantly. Because of this diversity, an appreciation of the substrates, the adhesives available, and the processes used to combine them becomes of increasing importance for converters intent on obtaining optimum properties through lamination.
We at RITU DYE CHEM have invested lot of years in gaining expertise in adhesives for all types substrates with rise in technology.
PE-265 is and acrylic pressure-sensitive adhesives.
It has high initial tack, and suitable to apply on PVC flooring tiles.
1. Wide-range decorative applications.
2. Domestic constructions.
3. Compatible with PP, PE, PVC to non-woven fabrics or foam products.
2164 Glues Adhesives Suppliers
Short on time? Let Glues Adhesives sellers contact you.
