According to actual conditions
Main technical parameter: 1 width module: 300mm; 2 brick thickness ;380mm; 3 length of feeder nose:1700-2300mm; 4 service life: over 10years We design for clients as per their specific requirements.
Properities A: outer clean and transparent, without visible bubble and impurity. Standards Bs6088classa/b Bsen1423/1424; Aashto type i/ii; Mot intermix / dropon; Ks standard; French standard; Australia standard /new zealand standard; Canada standard Tt-b-1325ctype1, type3, type4 Packing N. W.: 25kgs/ppwovenbag 25kgs/paperbag 1000-1200kgs/bulkbag 25kgs/bag, 1200kgs/pallet, 24000kgs/20fcl.
B:tinted float glass Cncs tinted glass is a body tinted glass manufactured by the float process. It has a coloured appearance, as well as basic solar control properties Color: euro/gold bronze, dark/ford blue, dark/light green, dark/euro grey, pink Thickness:3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm .Size:3300x2140, 3300x2134, 3300x2250, 3660x2134, 1650x2440, etc ivity and inspiration to fully unfold the high grade and fashion sense of modern architecture Thickness: 3-19mm Size:1830x2440, 3300x2134, 3300x2250, 3660x2134, 3660x2250, 3660x2440 etc Wood crate
Tempered glass Thickness:2-19mm Size:55*55(min), 3000*6400(max) Wood crate and carton
1, float glass Mainly used in furniture, architecture fields. Product size from 760mm*1400mm to 3660mm*10000mm, we can provide specific dimensions and different packing types according to customer¡¡¥s requirements A: clear float glass It is made of molten glass which flows through tweel to a tin bath and then to the lehr, while floating through the molten tin, the combination of gravity and surface tension results in smooth and flat surface on both sides Cnsg detailed specifications Thickness 2mm, 2.5mm, 2.7mm, 3mm, 4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm Size 1220*914*mm, 1830*1220mm, 2140*1650mm, 2200*1650*mm, 2250*1650mm, 2440*1830mm, 3050*1900/2134/2140/2440mm, 3300*1900/2134/2140/2250/2440mm, 3660*1900/2134/2140/2250/2440mm, etc; Wood crate
B:tinted float glass Cncs tinted glass is a body tinted glass manufactured by the float process. It has a coloured appearance, as well as basic solar control properties G-crystal ultra-clear glass shows extraordinary talents in the building field for its crystal-like high quality, performing greatly in energy conservation and environmental protection, lighting buildings with fashionable avant-garde architectural styles and design concepts, and motivate designer's creativity and inspiration to fully unfold the high grade and fashion sense of modern architecture Thickness: 3-19mm Size:1830x2440, 3300x2134, 3300x2250, 3660x2134, 3660x2250, 3660x2440 etc Wood crate
Pet.Coke dry powder combustion system. Water content ¡â2.0% Finess:200mesh¡ã100% Ii) Pet.Coke powder consumption:28t/d Iii) Requirements for compressed air:0.7mpa, 10m©ø/min Dry compressed air:0.7mpa, flow rate 10m©ø/min(stable pressure and flow rate) Iv)15 kw power:service power 15kw
Electric power ( 4 -phase ac 220-380v)/26kw Processing glass size Max: 2000*3000 /min:100*100mm Arch height:400mm (max) Glass thickness:36mm(max) Efficiency Processing cycle:40-90min/furnace Angding eva glass lamination machine is packed by density board, seaworthy packing
Insulating glass product detail description design: can design for you as per your need material: float glass, tempered glass, coated glass usage: used for display cabinets, freezers, wine cooler, windows and doors, automotive glass manufacturing methods: double hollow, three hollow, pumping vacuum, rechargeable hydrogen According to the products
Reflective glass Color: bronze; euro grey; dark grey; mist grey; french green; dark green; lake blue; pink etc Available size：3660*2134mm;3300*2134mm;1830*2440mm etc kinds of glass, laminated glass is much stronger to resist shock, burglary, burst and bullets. The interlayer impedes the transmission of solar heat and reduces air-conditioning cost. Installing laminated glass with a tinted interlayer will beautify the buildings and harmonize their appearances with surrounding views which meet the demand of architects. 1.Wooden cases(made in fumigation and plywood) With paper interlayer or power 2.As customer¡¯s request
Raw material:high quality aluminum, 3003 alloy Thickness: 0.25-0.31mm with limit deviation of¡¨¤0.025mm Type:unbendable aluminum spacer bars Treatment:high frequency welded with air circulation Size:6a~20a Roots into cartons
circulation Size:5.5mm~19.5mm and above 28mm Length:5m Color: plain To meet the application of quality aluminum spacer, "chunguang" develops quality aluminum spacer connector to provide one-stop supply. Various aluminum spacers and accessories in different sizes are for your choose Our location is in zhuozhou, hebei so if you need aluminium spacer bars Please do not hessitate to contact us because we are producer , because we have hight quality and factory based price. Roots into carton box
This is new cristal production. Carton
This is new cristal production. Carton
Brief introduction Ceramic Fiber, also called aluminum silicate fiber, it is a kind of light weight refractory fiber. It possesses the performances and advantages of high temperature resistance, light, excellent thermal stability, low heat conductivity, small thermal capacitance and mechanical vibration resistance etc. The ceramic fiber needled blanket is the main products of ceramic fiber, it has higher tensile strength and other excellent features. As refractory material, it has found an increasingly wide utilization in the fields of in metallurgy, cement, glass industry, etc. Production process The complete ceramic fiber production line adopts electrical resistance furnace to melt the raw material (such as calcined kaolin clay, alumina, silica, zirconia, etc) into lava. Then the three-roller centrifuge will attenuate the molten fluid into fibers under the centrifugal force of the high speed rotational rollers to the lava. The crude blankets are formed in the collecting chamber and then carried out from the setting chamber. After going through the allocating conveyor, the crude blankets enter into the sintering furnace to be cured. Then the double-layer needling machine will needle the blanket to make the fiber layer tightly interweave with each other. Then after longitudinal and cross cutting, rolling, the crude blankets will become the needled blanket. Equipment Introduction Melting system The electric resistance furnace could use the current generated between the electric resistances to melt the raw materials. Fiber forming system The fiber forming machine is three-roller centrifuge. The high temperature melting fluid will be dispersed and stretched into thin fibers by the centrifugal force of high speed roller. Wool collector The wool collector is used to collect the fibers into crude blanket. The fibers are evenly drawn on the mesh belt under the function of negative pressure air and become crude blanket. Needling machine Needling blanket is developed from the non-woven needling technique. The needle hooks move up and down and draw the fibers to make the fiber layer tightly interweave with each other. This process could improve the tensile strength and the wind erosion resistance performance of the blanket. Sintering furnace It could burn off the lubricant in the blanket and make fiber microcrystalline processing to achieve the heat shaping of the blanket and reach the required thickness and dimension. Cutting and rolling system This system is used to finish the cutting and rolling of the blankets. The blankets will be cut into pieces or strips and rolled into rolls according to the proceeding requirement. PE film, Container
Brief introduction Rock wool is a kind of vitreous fiber that gets from slag, basalt, limestone and dolomite through fusion and fiber forming technique. It has good thermal and sound insulation property and widely used in building industry, chemical field, textile industry and many other fields. Equipment introduction Melting system This production line could adopt tank furnace or cupola furnace according to different production condition. They could ensure reliable melting performance and continuous operation. Fiber forming system The main equipment in this system is the four-roller centrifuge. It could transform the high temperature lava into thin fiber with the centrifugal force produced by the high rotating rollers. Wool collecting system This system could collect fiber under the negative pressure of the air-intake fan and allocate the raw blanket stably and equably to form multi-layer blanket. Wool allocating machine It could allocate and convey the raw blanket from the pendulum and also act as the transition part to connect each production process. Compression pleating machine It will prepress the blanket and then send it into curing oven. It could improve the strength and tearing force of rock wool and also reduce the burden of the curing oven. Curing oven It could cure and shape the rock wool to form rock wool board or blanket with certain density and width. Cooling conveyor Its function is to make the product cool and convey the product to the next process. Cutting system It could proceed longitudinal and crossing cutting to make required products. Packing machine The packing machine is used to pack the rock wool board with one layer of shrinkage film, in order to facilitate the transportation and loading. PE film, Container
Brief introduction Glass wool is a kind of insulation materials which is made of natural ores, such as quartzite, dolomite, feldspar, limestone and so on. With the features of low density, fireproof, thermal insulation, the glass wool has found a wide utilization in the fields of petrochemical industry, architecture, etc. The capacity of the glass wool production line is 2000-20000 tons per year. The raw material is cullet, feldspar, dolomite, calcined soda, borax, limestone, others. The fuel could natural gas or heavy oil, etc. Production process The glass wool production line is a complete set of machinery. The raw materials added with auxiliary agents such as calcined soda and borax are melted into glass fluid in the tank furnace. The lava is drawn, blown or thrown into very thin fibers under centrifugal force of the spinner. The forming fiber will be collected to be original blanket by wool collecting machine. The original felt is sent into the curing oven to be solidified and shaped by the conveyor. After curing, the products will go through the cooling section. It will be cut by slitting cutter and cross cutter according to the setting length. Finally, it will become the final products such as board, blanket. We could provide a series of service including the project consultancy, technical support, installation and commission, employees training, system maintenance, technology upgrade, etc. we warmly welcome you to visit our company. Equipment introduction Melting system This production line adopts tank furnace which is made up of different refractory materials and uses natural gas as fuel. Fiber forming system Centrifuge could produce glass wool fiber from vitreous fluid. It is the key equipment of the whole production line and decides the quality of the final product. Glass wool collector Glass wool collector could collect fibers into crude felt which is then sent to curing oven via the transition conveyor. Curing oven Curing oven could heat and shape glass wool layers containing binder as per the density, size required for products. It could make binder and fibers polymerize into one, producing glass wool blanket and board. Conveying and cutting machines The conveying machine could convey the cured glass wool products to the cutting system and cool the products at the same time. The cutting system could proceed longitudinal and crossing cutting to make required products. Blanket / felt-rolling machine It could roll the glass wool blanket into rolls and facilitate the packing of product. PE film, Container
1.High softening point; 2.3.3 co-efficient of expansion; 3.180 thermal shock resistance; 4.Reasonable price with good quality
Derstrong enterprise co., ltd refined the products to develop glass clad polycaborate and provide not only safety shield for the operator but also the machining process can be directly monitored during its working. We integrated both advantages of polycarbonate and glass to provide a solution of hight impact resistance, anti-scratching, anti-corrosion, safety vision window for cnc machine tools. Of course our quality conform to ce certificated like eN ISO 23125, EN 12415, EN 12417 AND EN 12478. Na
