he CMM-G unit is designed for a three-stage process of changing oil in wind turbine gearboxes (draining old oil, flushing the gearbox and filling it with new oil). The unit allows for quick and efficient servicing of wind turbine oil system. The unit can be used for servicing wind turbines made by many different manufacturers. The CMM-G can also heat clean oil.
This DC to AC inverter is designed for the backlight of 6.4-15.1" LCD Panel with single CCFL lamp
Input voltage: 12VDC
Kick-off Voltage: min1500
Lamp Voltage: 500V
Output Connector Mode: SM02B/ SM02 (8.0)*2
Transformer Qty: 2
Output Current: 6mA
Output Voltage: 500V
Frequency: 40 KHz
Dimmer: Yes
Dimension : 95.5mm*20mm*4.7mm.
Rossel Pt100 Temperature Sensor new not used
ATI HANDELS GMBH registered in Germany with the Company reg no HRB114892 HAMBURG. It can be contacted at Germany, Raboisen 16, c/o ETL International GmbH, 20095 Hamburg. It's current status is active. Company was founded 18.08.2010 (5 years and 9 months ago).
the brand we can do is Sprint Electirc,Roessel,MP Filtri,Conatex,easy lift,Albrecht ,Di-Soric,Stieber,Kostyrka,Votech etc.
and what we sell are valve,switch,timer,pump,coupling,generator,clutch,pump head,sensor,rake pads,cylinder,relay,analyzer,motor
Features
* Pressure ranges from 10 mbar to 5 bar absolute, differential or gage
* Barometric pressure ranges
* Output: I²C bus and 0.5...4.5 V
* Precision ASIC conditioning
* Calibrated and temperature compensated
* Miniature SMT and DIP housings
* Sensortechnics PRO services
Applications
* Medical equipment
* Environmental controls
* HVAC
General description
First Sensor HDI sensors offer precision pressure measurement from 10 mbar up to 5 bar. The HDI series performs precision digital signal conditioning to achieve ultra high total accuracies. An internal ASIC compensates sensor offset, temperature effects and non-linearity to allow for an excellent Total Error Band (TEB) better than ±0.5 %FSS. The pressure sensors provide digital interfaces with I²C bus protocol as well as analog output signals. Optional 3 V supply voltage versions and special low power devices make the HDI series ideal for battery powered applications, e.g. in portable or handheld devices. Miniature SMT housings allow for space-saving PCB-mounting and maximum OEM design flexibility.
Size without nipples and pins (approx.) 12 x 15 x 7 mm
The LDE differential low pressure sensors are based on thermal flow measurement of gas through a micro-flow channel integrated within the sensor chip. The innovative LDE technology features superior sensitivity especially for ultra low pressures. The extremely low gas flow through the sensor ensures high immunity to dust contamination, humidity and long tubing compared to other flow-based pressure sensors. Miniature SMT and DIP housings allow for space-saving PCB-mounting.
Typical applications include medical devices, HVAC and instrumentation.
CEE Plug connections from ABL SURSUM have safety standards that we are proud of - even under the toughest of conditions.
They impress with innovations and maximum technical efficiency right down to the last detail. That is how they make our products into solutions for the most demanding challenges. Screwless, centric strain relief, double-secured box terminals, highly-conductive lamellar contacts and self-finding threads are only some of the most important details that not only experienced professionals can appreciate.
In addition to the high safety standards for the CEE components used and the high-performance Miniature circuit breakers, these Wall-mounted socket outlets have a mechanical locking system for optimal safety.
Wall-mounted socket outlets which can be switched off - everything under control in one step.
* Enclosure in PC/ABS version
* Mechanical locking: after insertion and switching on, the plug is locked after switching off and removal of the plug, the switch is locked
* On/Off switch 10kA accordance to EN 60947-3
* Large connection space
* Wired
* Cable entry above or below
* Wide number of versions from 16 to 63A can be supplied
* Wiring can be led through for 16 A and 32 A
* Can be locked with padlock (40 mm) in the switched-off position
* From wiring space, protected long hole wall mounting.
Two connection variants with screw terminals and in various colours.
With screwless terminals (plug2power), with and without higher protection cover, in SCHUKO versions and in accordance with the French/Belgian CEE 7/V) standard.
It can happen very quickly: Thoughtlessly touching a currentcarrying cable; a faulty connecting cable; or a device fault. Happy are those who have protected their electrical system with the right RCCB. In the event of damage, it is activated within a fraction of a second, breaks the circuit and thus possibly saves lives. In this way, everyday exposure to current gets considerably safer.
For new installations and extensive renovations of commercial and private electrical systems, the use of RCCBs is mandatory according to VDE 0100-410 since June 2007 anyway. This also refers to all outdoor electrical systems and electric circuits.
Our product range offers you the right RCCB solution for every field of application because - in addition to devices of type A (sensitive to pulsating currents) and type B (sensitive to universal current) for the German market - we can also deliver devices of type AC (sensitive to alternating current - not approved for Germany) for export.
Compact construction
* Minimum dimensions - with an installation height of 82.5 mm, one of the smallest miniature circuit breakers on the market
* Maximum saving of space for comfortable wiring.
Easier busbar removal
* Innovative fixing slides for easy removal from a busbar combination
* No laborious moving of the mounted miniature circuit breakers
* "Singlefix" for removal from a bottomfixed busbar
* "Twinfix" for removal from a busbar on both sides.
Perfect compatibility
* Multi-system compatibility of the S, SL and T product ranges, the RCCBs and DIN-rail panel products
* Suitable for bottom busbar installation with previous products
* Use of standard busbars
* Attachments compatible with all product ranges.
Powerful and safe - manufactured in Germany.
Optionally with following light sources:
1) fluorescent lamp 15W - 900 lumen.
Lifetime 8000 h, white light.
The brightness is similar to 75w halogen light.
2) or fluorescent lamp 18W - 1200 lumen,
Lifetime 12000 h, white light.
The brightness is similar to 90w halogen light.
3) or with power LED lamp 15W - 1200 Lumen,
Lifetime 40000 h, white light.
The brightness is similar to 90w halogen light.
4) or sodium low pressure lamp LPS 18W - 1770 lumen.
Lifetime 18000 h, yellow light.
The brightness is similar to 120w halogen light.
Solar Panel: 75W / 100W / 120W mono crystalline silicon (protecting glass, hail-proof) aprx. 25 years life duration.
This modern module technology has a high degree of efficieny and allows charging also at cloudy weather.
Solar battery: 12V maintenance-free power gel accumulator 12 volt. Life time: 5-8 years.
Functions well under low temperature.
Control: Microprocessor for automatic lamp start by light sensor,
turn-off by dawn or by the adjustable timer, e.g. after. 8 hours.
Over-charge and low-discharge protection for the battery.
Pole: Steel hot-dip galvanized, height 500cm + 80cm for concreting.
Rigid plastic case for inground-mount for the batteries, (walk-over). Size 360 x 260 x 320mm.
Daily operation at dark-cloudy weather:
a) Standard version: 1 day (16 hours)
b) with extension kit autumn: 2 days (24 h)
c) with extension kit winter: 4 days (40 h)
Distance from pole to pole = Lighted area Ø aprx. 25 meter
Ambient temperature: -35°C ~ +60°C
Maintenance-free (only sometimes is the cleaning of the solar panel required).
Included in the shipment: High-power battery, pole and lamp.
