Gaskets type ft of oleo-dynamic seal for plunger and double-effect pistons.
Sand guard gaskets for electric motors in nbr 60 sh/a rubber.
Ptfe gasket 1) sealing gasket for pumps and pipes, etc. 2) all sizes are available 3) new molds can be made according to customers' requirements 4) high chemical properties 5) wide temperature range from -180ípc to +260ípc 6) has the lowest coefficient of friction of all the known solid materials 7) not aging 8) nonstick All sizes available on customers' requests
Nitrile gaskets
The product conforms to VALQUA Standard.
Spiral wound gasket Got-400 spiral wound gasket is accumulated, hovered and wound, and spot welded beginning and end terminal by v-shaped or w-shaped stainless steel and non metal filler, which has good compression elasticity, and is suitable for the sealing parts with temperature and pressure altering violently. It is a static sealing parts used for such flange connecting joints as pipeline, valve, bump, heat exchanger, tower, manhole, and hand hole, etc. It is widely applied in departments as petrochemical, mechanical, electric power, metallurgy, boat building, medical, atomic energy, and aerospace, etc. Ansi b 16.20mss sp-44api 605dinjisjpibs 1560jg/tgb/thgsh, etc.
Inner and outer ring of swg Got-400r metal flat gasket can also be processed into the inner and outer ring of the spiral wound gasket. We will punch the gasket that with the size smaller than 8fª by punching machine, and for the one that with large size by lathe. If for the expensive material as ss304, ss316, etc. As long as the sealing plane is not over wide, we will basically use the special ring rolling machine, process by the wire rod, to largely cut cost. The carbon steel outer ring can be coated with zn, white zn, or paint-drying, and the typing will be according to the standards or the demands. Product structure: The metal interface flat gasket, choose kinds of solid metal, mechanically cut and processed into kinds of metal sealing gaskets by high precision nc lathe, suitable for the sealing parts of pressure container, valve, cylinder head with high temperature, high pressure, and strong corrosion. General characteristic is installation area small and preload pressure high. Got-400r metal flat gasket can also be processed into the inner and outer ring of the spiral wound gasket. Got self design and manufacture the ring processing special equipment, outer ring trench cutter, and inner ring chamfering machine. Comparing with the traditional lathe, it is high efficient, low cost, and need no special fixture. Inventory product: Size: Asme b 16.20 1/2fª ~ 24fª 150lb, 300lb, 600lb, 900lb Other sizes or standards on require. Material: Carbon steel, zinc plating, or without zinc plating Ss304, ss304l, ss316, ss316l The following special material on require: Ss321, ss317l, duplex 31803, Ti, ni, inconel, monel, hastelloy, and zr, etc
Kammprofile gasket Got kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, ptfe, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type kammprofile gasket 410l kammprofile gasket with outer ring (integral type) 410lm kammprofile gasket with outer ring (split type) Model 410lm split type metal toothed gasket with outer ring, can choose richer metal, e.G. Carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410l, and the lining metal can be repeatedly used. Product application: Got toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25mpa Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; Ptfe, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm
Ring joint gasket Got-450 ring joint gasket chooses solid metal with kinds of materials, and is mechanically cut and processed into metal sealing gaskets with kinds of forms by high precision nc lathe. It is suitable for the sealing part of pressure container, valve, and cylinder head with high temperature, high pressure, and strong corrosion. General characteristic is installation area small and preload pressure high. Metal flat gasket Metal elliptic gasket Metal aniseed gasket Rx type metal gasket Bx type metal gasket Special-shaped metal gasket
Reinforced (non-)asbestos beater sheet Got-633 is made of 633-1 non-asbestos beater sheet inner lined with metal truss plate (generally the carbon steel with 0.2~0.25mm thickness). It is extensively applied in manufacturing various automobile and motor gaskets. It is an ideal material that will substitute the traditional asbestos gaskets. The product has excellent performance in self expansion, high resilience and long lifespan, etc. Mainly applied in automobile farming machine, motorcycle and engineering etc., it is also can be used in high strength gaskets and cylinder gaskets etc. Product structure: Got-633 truss plate reinforced asbestos beater sheet If stored for a long time, the asbestos will have certain corrosion to the inner lined metal.
Rubber wheel chock Rubber wheel chock is used for wedging and blocking tires to restrict movement of the wheel while vehicle is being loaded or unloaded at the dock, also stopping the car for repairing in a slope. Material: nr, sbr, epdm or reclaimed rubber.
Ptfe gasket 1) sealing gasket for pumps and pipes, etc. 2) all sizes are available 3) new molds can be made according to customers' requirements 4) high chemical properties 5) wide temperature range from -180ípc to +260ípc 6) has the lowest coefficient of friction of all the known solid materials 7) not aging 8) nonstick All sizes are available on costomers' request
Rubber pedal Rubber pedal is used for for different vehicles and trucks, prevent from slipping. We supply pads with various materials and styles. High/low temperature-resistant, wearing-resistant, aging-resistant, oil-resistant. Material: epdm, nbr, nr, cr, sbr, silicon
Ptfe gasket 1) sealing gasket for pumps and pipes, etc. 2) all sizes are available 3) new molds can be made according to customers' requirements 4) high chemical properties 5) wide temperature range from -180c to +260c 6) has the lowest coefficient of friction of all the known solid materials 7) not aging 8) nonstick All sizes are available on costomers' request
Molded rubber product 1) we could effectively guarantee the stable quality, and the credibility; 2) rubber material could be epdm, nbr, sbr, cr, nr, rr, silicone and so on. 3) we can produce according to your drawing and samples. 4) different colour and size are available 5) we have the capacity to run parts from 1 gram to 8 kilograms. 6) small orders accepted 7) competitive price 8) prompt delivery time
Extruded rubber product A) we can extrude solid rubber or sponge rubber according to your drawing or samples. B) main rubber material could be silicone, epdm, nbr and so on. C) free mold cost for our customers. D) different colour are available E) prompt delivery time
Material: Spairal wound gasket is formed of V-shaped of W-shape stainless steel stripe and soft nonmetallic packing or the material of flexible graphite asbestos, nonasbestos, PTFE etc by means of piled. The(inner/outer) ring: Carbo steel, SS304, SS316, Monel Use temperature: -200-870ípC Use pressure: 30Mpa Application range: The static sealing element of pipe, valve, pump, thermal exchange, condensing motorcycle, auto vent-pipe, tower, plain hole and hole of flange, etc. Supplying specification: DN10-300-0mm
Product Information: Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type Kammprofile gasket 410L Kammprofile gasket with outer ring (integral type) 410LM Kammprofile gasket with outer ring (split type) Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used. Product application: GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa Selectable material: Metal material German trademark Hardness Temperature íµ Density g/cm3 Thichness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 2 3 4 SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; PTFE, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm
Product Information: Description: GOT - 420 Corrugated Metal Gasket is processed by metal flat ring into concentric waveform coil by die-pressing, rolling, or turning techniques, with the surface sticking non-metal as expanded graphite or PTFE. Comparing with 410 Kammprofile gasket , the lining metal can choose multiple thickness, as 3mm, 2mm, 1mm, 0.5mm, etc. and the metal wave distance can be different according to the width difference of the sealing surface, generally be 3mm, 4mm, 6mm Selectable material: Metal material German trademark Hardness HB Temperature íµ Density g/cm3 Thickness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 0.5mm; 1mm, 2mm; 3mm, 4mm SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, PTFE, asbestos plate, non-asbestos plate; Generally the thickness of the dual overlaying is 0.5 mm, 1.0mm, 1 .5mm
Product Information: Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type Kammprofile gasket 410L Kammprofile gasket with outer ring (integral type) 410LM Kammprofile gasket with outer ring (split type) Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used. Product application: GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa Selectable material: Metal material German trademark Hardness Temperature íµ Density g/cm3 Thichness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 2 3 4 SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; PTFE, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm
