Gas equipments, gas meters, gas valves, gas governors, gas regulator, gas filters, gas odorizing systems.
A major European investor, the data will be disclosed later, which is also a major shareholder of PJSC Gazprom, currently owns a balance of 14 billion cubic meters of gas for 2021. He is a resource holder. That is, he receives the volume on a "set-off" at the expense of his investments. Accordingly, he was redeemed. The documents are submitted to Gazprom Export, since Gazprom Export draws up a schedule for pumping gas through the pipe to the Baumgarten hub. The volume will be pumped according to the Buyer's schedule. The minimum volume is 5 billion cubic meters. Upon confirmation of solvency for two months, the documents will be promptly executed and bypassing all the bureaucratic obstacles of PJSC Gazprom, sent to Austria for signing. This volume is not considered a "primary" and is not considered a "secondary". There is no need to submit documents directly to Gazprom Export, since they will be "lost" there. The contract will be concluded for 5 years with this European company. You don't need to come to Russia. The meeting and signing of the contract will take place directly in Austria. The discount will be minus 30% from Argus.
The company Akdagi LTD offers Granulated Gas Technical Sulfur. Purity: 99.95%. Origin: Turkmenistan.
Gas oil.
Marine gas oil lsfo.
Jet A1, Destination: Black Sea
Gas.Sourcing agents
Russia origin diesel gas d2 oil gost 305 82,russia origin mazut m100 gost 10585/75/99,russia origin aviation kerosene colonial grade 54 jet fuel,virgin fuel oil d6,liquefied petroleum gas. gost 20448 90,iquefied natural gas (lng) liftable quantity,fuel oil cst 180,urea 46% prilled & granular (russian origin),sulphurgranular,russia origin jet a1 fuel,diesel gas oil ultraâ??low sulphur diesel,base oil: (all types),gasoline octane (all types),light cycle oil(lco),bitumen grade60/70 and 80/100:,gasolene 89 octanes,travertine,marbel,silica sand,talc, phosphate.
1.CALCIUM CHLORIDE/CaCl2 APPLICATION Calcium Chloride/CaCl2 is widely used in snow & ice melting,oil & gas drilling,moisture-absorbing,Mutli-use Dryer, Dehydration agent,cryogen,removing agent,dust collecting agent,polycoagulant,refrigeration,Buiding antifreeze, rubber and petroleum industries. 2.BRIEF SPECIFICATION OF CALCIUM CHLORIDE/CaCl2 Content of CaCl2 94.53% PH 8.0 Nacl 3.10% Mgcl2 0.12% Ca(OH)2 0.10% Water Insoluble 0.10% Heavy Mental(as Pb) conforms Arsenic conforms specification flakes,powder,granuler,pellet,ball
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: 78*78-325*380 O.D: 50-100 mm Model Number: HDPE Thickness: Depends on your requirement Color: White Material: PE Standard: OHSAS 18 001 Types: Clamps,Elbows 45°,Elbows 90°,Couplings, Reducing couplings,T-Joints 45°,T-Joints 90°,Cross T 45°. Packaging & delivery: Depends on your order. Description: Installation of pipes to the interval sewer network uses from PPH “Homogen polypropylene” fitings .High physical-mechanical properties make these fittings resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Fittings. As distinct from PVC Fittings, they have high impact resistance. Our offers fittings made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry. Taking into consideration biological neutrality of material, fittings can also, be used in food manufacturing industry. Sewage fittings and their socket details are made of high quality white or gray colored granulated propylene. Process of production is carried out in accordance with the requirements of ISO 9001:2000. Technical parameters: Polypropylene sewage fittings are 15 – 20 times lighter than similar cast iron fittings. They are resistant to impact of detergent agents and also, there is no need to paint the fittings. Availability of socket helps to connect them easily. Warranty period is over 50 years • Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C) • Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances • Resistance to hydraulic friction • Leak connections by sealing rubber rings • Ease of pipes and fittings facilitates transportation and installation work. • As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration • Condensate does not occur due to the low thermal conductivity on the outer surface of pipe
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.8-4.9 mm Item: Sewage polypropylene pipes PPH Rating: IP65 Certification: ISO9001 Color: White Standard: OHSAS 18001 Specification: As your requirement OD: 50-200 mm Length: 250-3000 mm Packaging & delivery: Depends on your order. Description: Pipes made of PPH “homogeneous polypropylene” are used for the construction of internal sewer network. High physical-mechanical properties make these Pipes resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Pipes. As distinct from PVC Pipes, they have high impact resistance.Our offers Pipes made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry.Taking into consideration biological neutrality of material, Pipes can also, be used in food manufacturing industry. Sewage Pipes and their socket details are made of high quality white or gray colored granulated propylene. Process of production is carried out in accordance with the requirements of ISO 9001:2000. Technical characteristics Polypropylene sewage Pipes are 15 – 20 times lighter than similar cast iron Pipes. They are resistant to impact of detergent agents and also, there is no need to paint the Pipes. Availability of socket helps to connect them easily. Warranty period is over 50 years. • Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C) • Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances • Resistance to hydraulic friction • Leak connections by sealing rubber rings • Ease of pipes and fittings facilitates transportation and installation work. • As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration • Condensate does not occur due to the low thermal conductivity on the outer surface of pipe
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Types: Elbows 45,90 dgr., Tee T-Joints 90 dgr., Tee Reducing T-Joints 90 dgr., Pipe Caps, Reducing couplings, Flange Adaptor. Packaging & delivery: Depends on your order. Description: Cast fittings - pipe fittings are manufactured by molding of polyethylene (PE100) under pressure and temperature. Cast fittings are used in cases when you want to change the direction of tubing, tee off, or switch to a different diameter. A significant advantage of cast fittings is their relatively low cost associated with the ease of manufacture. Installation is carried out by butt welding, which reduces the financial costs because practically no consumables required at the same time relatively simple installation. Elbows, flange bushings, reducers, tees and caps, are used in gas and water pipes made of PE100 from 63 to 315 mm.
One of the serious problems of natural environment protection during oil and gas production is liquidation ground by oil pollution. Oil and mineral oils disturbed ecological state of top-soils as a whole deformed biocoenosis structure. In results of damages (oil) pipe lines, oil-processing and petroleum distillating plants a great deal of oil and oil production comes in ground. Cleaning and reconstruction of in ecocatastrophe region realizes properly polluted ground impressments from pollution place with its posterior cleaning by chemical and biological methods or its, immediately contiguous to technological object also to environment air and burial on special firing range. Elimination the oil flood permits to greatly improve sanitary state not only on territories water. Oil hydrocarbons decomposition intensity and character in ground mainly defined by functional activity hydrocarbono-xidizing bacteria (HOB) capable to assimilate oil as a single carbon spring. Method biological or polluted burial on special firing range was not find wide application. Since the first method is virtual during of the ground pollution more than 5-10%. And second method is not widespread for the reason of loose huge number of grounds. During last years new compositional structure are developed by “Karvan L” company staff on the basis of surfactant species “LD500IF”. The reagent successfully passed work bench measurements on hydro-cyclone units and effectiveness of the feagent is 98 -99 % during expenditure norm 20-25 mg/l.
Petroleum refining is characterized by the largest amount of systems exposed to corrosion compared to any other sector of the oil industry. Corrosion problems occur everywhere, from the points of raw materials delivery up to removal and transportation of the refined products. Corrosion control measures shall be taken at crude oil distillation plants and units for alkali treatment of oil, gas plants, reformer and cracking units, straight run deisobutanizers, units for adsorption of hydrogen sulphide from aqueous solutions, furfural treatment units etc. Liquid composition may vary depending on a particular stage of the oil refining cycle – from sulphurous, acid oil-water mixtures fed to refineries to final products (e.g., gasoline) with negligible water content. It is hardly possible to use any “universal” corrosion inhibitor due to the variety of process mechanisms that may cause intense corrosion of equipment used in the oil sector. The need to ensure property package determining processability and compatibility of the inhibitor with corrosion medium components necessitates development of an inhibitor that would be functional in different corrosive conditions. Oilfield water containing large amounts of chloride ions, oxygen, carbon dioxide and hydrogen causes and promotes further development of local electrochemical processes, which represent the most dangerous type of corrosion and failure of metal. Oilfield practice shows that the most dangerous local corrosion damages also occur in the presence of microorganisms. In order to protect oil equipment against chemical and bacterial corrosion, Karvan-L company designed efficient and cost-effective water-soluble and oil-soluble corrosion inhibitors. Corrosion inhibitors are nitrogen-containing surfactants, produced based on natural acids with addition of film-forming admixtures and biocides.
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.8-70.5mm Item: PE 100 pipes Structure: Bellows inside and outside Certification: ISO9001 Color: black Standard: OHSAS 18001 Specification: As your requirement OD: 16-1200 mm Length: As your requirement Type: Flexible and Durable Packaging & delivery: Depends on your order. Description: Preparation of ?? 100-based polyethylene Pipes is considered as a beginning of a new phase in plastic Pipes production. These Pipes are considered more contemporary and characterized by high pressure resistance. As distinguished from other brands of Pipes (?? 63, ?? 80), these Pipes with less wall thickness have higher mechanical characteristics. Pipes ?? 100 are applied in the following areas: • Underground and surface drinkable and technical water pipeline network • Water drainage system • Field irrigation systems • Oil fields • Chemical and petrochemical industry • Construction of buildings and industrial facilities • Construction of main and local gas pipelines Advantages of PE100 Pipes: • Durability. ?? 100 Pipes obtain 50 years of minimal guarantee, this duration can be extended during operation. • High shock resistance, cracking resistance • High chemical resistance • Resistance to sunlight • Manufactured in standard sizes and in roll form • Smooth inner surface • Suitable for the usage in seismically active areas • Freeze resistance • Wide range of pressure Range of pipe sizes produced under normal pressure • DN - outer diameter of pipe, (mm) • s - pipe wall thickness, (mm) • SDR - Standard Dimension Ratio • M - Estimated weight (kg/m) 20 bar - SDR 9 DN: 16- 630 mm S: 2-70.3 mm M: 0.09-123 kg/m 16 bar - SDR 11 DN: 20-710 mm S: 2-64.5 mm M: 0.116-131 kg/m 12,5 bar - SDR 13,6 DN: 25-1000 mm S: 2-73.5 mm M: 0.148-214 kg/m 10 bar - SDR 17 DN: 32-1200 mm S: 2-71.1 mm M: 0.193-252 kg/m 9,5 bar - SDR 17,6 DN: 40-1200 mm S: 2.3-68 mm M: 0.281-242 kg/m 8 bar - SDR 21 DN: 40-1200 mm S: 2-57.2 mm M: 0.244-206 kg/m 6,3 bar - SDR 26 DN: 50-1200 mm S: 2-45.9 mm M: 0.308-167 kg/m 5 bar - SDR 33 DN: 63-1200 mm S: 2-36.7 mm M: 0.392-134 kg/m 4 bar - SDR 41 DN: 75-1200 mm S: 2-29.4 mm M: 0.469-108 kg/m
Aviation turbine jet fuel a1, aviation kerosene colonial grade 54 (jp54), en590, diesel d2 gost 305 82, espo crude oil, light cycle oil, petroleum coke, diesel fuel en590, fuel oil cst 180, 280 and 380, c4 raffinate, lng and lpg d6 virgin fuel oil, mazut m100, rebco, bitumen and urea contact on whatsapp: +7999718 17 69.
Steel pipes, steel coils, tubing pipes, drilling pipes, casings, aluminium billets and aluminium wire, copper cathodes, BOP, drilling tools, submarine power and optic cables of LV, MV, HV, cable termination and connectors,V-belts, mud and drilling pumps and spare parts, rubber and plastic products, natural gas heaters, fire handling facilities, power panels.Transportation
Oil & Gas, Fertilizers And Food Commodities.
Pyrolysis Oil And Recreated Carbon Black.
Crude Oil, Jet Fuel A1, Diesel D6, En 590, Lpg, Lng, Etc., And Other Petroleum Derivatives..
