Birch wood and Acacia hardwood charcoal. Non-spark, non-smoking, no odor and long lasting burn for Restaurant BBQ
D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400. Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
For metallurgical coke, we can supply based on the following range of specifications: Fixed carbon: 80%~86% Sulphur: 0.7%~1.0% Ash:13.5%~18% Volatile matter: 1.5% max. Moisture: 8%~15% Size is customized
We supply foundry coke products with the range of specifications as follows: Fixed carbon: 85%~90% Sulphur: 0.5%^0.8% Volatile matter: 1.5% max. Size is customized ASH >8%/15%
FIXED CARBON 98.5%MIN Sulphur 0.1%MAX Ash 0.7%Max Volatile matter 0.8%MAX moisture 0.5%max Size 1.5 mm
Fixed carbon 99% min. Sulphur 0.03%max. Ash 0.5% max. Volatile matter 0.5% max. Moisture Size (mm) HQ-GES-01 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1
Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate. Item HQ-SGPC-01 Fixed carbon Sulphur 98.5% min. 0.1% max. Ash 0.7% max. Volatile matter Moisture Size(mm) HQ-SGPC-02 98.5% min. 0.2% max. 0.7% max. HQ-SGPC-03 98.5% min. 0.3% max. 0.7% max. HQ-SGPC-04 98% min. 0.5% max. 1% max. HQ-SGPC-05 98% min. 0.8% max. 1% max. 0.8% max. 0.5% max. 0.8% max. 0.5% max. Graphite Electrode Scrap(GES) Item Fixed carbon Sulphur Ash HQ-CPC-01 98.5% min. 0.5% max. 0.7% max. HQ-CPC-02 98.5% min. 0.8% max. 0.7% max. HQ-C PC -03 98.5% min. 1% max. 0.5% max. HQ-CPC-04 98.5% min. 2% max. 0.5% max. HQ-CPC-05 98.5% min. 3% max. 0.5% max. Size(mm) 1-3/1-5 1-5/30-60 1-3/5-20 1-5 0-2 Item Fixed carbon Sulphur Ash Volatile matter Moisture Size (mm) HQ-GES-01 99% min. 0.03%max. 0.5% max. 0.5% max. 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1 * Other sizes and specifications are available,please enquire - HENGQIAOCARBON 1% max. 1% max. 0.5% max. 0.5% max. 0.8% max. 0.5% max. 1-5 3-8 1-5 1-5 1-5 Green petroleum coke 144 shaft kiln for petcoke calcined 1% max. 0.5% max. Crush Sieving Packing Volatile matter Moisture 0.8% max. 0.5% max. 0.8% max. 0.5% max. 1% max. 0.5% max. 1% max. 0.5% max.
High-quality green petroleum coke is taken into Acheson furnace for graphitization process with temperature around 2500-3600 �°C.The product has higher degree of graphitization with nitrogen content is lower than 300ppm.This product, with lower sulpur and ash content, is ideal recarburizer for steelmaking and foundry industries. Fixed carbon 99% min. Sulphur 0.03% max. Ash 0.5% max. 0.7% max. 1% max. 1% max. Volatile matter 0.5% max. 0.8% max. 1% max. 1% max. Moisture 0.5% max. 0.5% max. 0.5% max. 0.5% max. Size(mm) 1-3/1-5 1-5/5-10 0.2-1 0-0.5 2 HQ-GPC-02 98.5% min. 0.05% max. HQ-GPC-03 98% min. 0.07% max. HQ-GPC-04 98% min. 0.1% max. ä¸? è??楺碳表 HENGGIAO CARBON Semi-graphite Petroleum Coke(SGPC) Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate.
Calcined petroleum coke is solid petroleum coke product with black and dark gray color,shine with metallic luster,porosity and composed with micro-graphite crystals.It is the carbon material in the form of granular,columnar and acicular. Type Fixed carbon(Min) Ash(Max) Volatile Matter(Max) Moisture(Max) Sulfur content(Max) Nitrogen content(Max) Calcined petroleum coke 98.5% 0.50% 0.50% 0.50% 0.5% 300ppmSize:1-5mm,1-3mm,or as customer request. Application: 1,Calcined Petroleum Coke can be widely used for producing Anode Paste and Prebaked Carbon Anode for electrolytic Aluminium,application as additive in graphite electrode and carbon raiser production,also used as fuel for silicon. 2,Used as basic raw material for carbon additive and foaming agent. 3,Used in chemical industry as the basic source of sodium hydride and high
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles.
Petroleum coke, or petcoke, is a product produced from all types of oil (light/heavy crudes) during the oil refining process. Many different products are extracted from a barrel of crude oil in addition to gasoline, diesel and jet fuels. Petroleum coke just one of the many.
Description: Automotive Gas Oil (AGO), commonly referred to as diesel fuel, is a vital component in the automotive industry, powering a wide range of vehicles, from cars and trucks to buses and heavy-duty machinery. Renowned for its efficiency, reliability, and versatility, AGO is the fuel of choice for millions of drivers worldwide. Key Features: High Energy Density: AGO boasts a high energy density, providing exceptional fuel efficiency and optimal engine performance, whether cruising on the highway or hauling heavy loads. Clean Combustion: Engineered for clean combustion, AGO minimizes emissions of harmful pollutants such as sulfur oxides (SOx), nitrogen oxides (NOx), and particulate matter (PM), ensuring compliance with environmental regulations and reducing environmental impact. Cold Weather Performance: Formulated with additives to enhance cold flow properties, AGO remains fluid even in frigid temperatures, facilitating reliable engine starting and smooth operation in cold climates. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, AGO delivers consistent performance and reliability across various vehicle types and models. Long-Term Stability: Engineered for long-term stability and storage, AGO maintains its integrity and performance characteristics over time, minimizing fuel degradation and ensuring reliable operation even during prolonged storage periods. Target Audience: Private Vehicle Owners: Ideal for owners of diesel-powered cars, SUVs, and pickup trucks, AGO provides reliable fueling solutions for daily commuting, road trips, and recreational activities. Commercial Fleets: Trusted by businesses operating delivery vans, trucks, and buses, AGO offers cost-effective fueling options for fleet management, logistics, and transportation services. Construction and Agriculture: Essential for heavy equipment and machinery used in construction, agriculture, and mining, AGO powers tractors, excavators, and other diesel-powered vehicles with exceptional performance and reliability. Experience the Power and Efficiency of Automotive Gas Oil (AGO) for Your Driving Needs!
Description: Petroleum coke, often abbreviated as pet coke, is a carbonaceous solid derived from refining crude oil. It is a versatile fuel and carbon source with a wide range of industrial applications, prized for its high carbon content and calorific value. Key Features: 1. High Carbon Content: Petroleum coke typically contains a high percentage of carbon, making it an excellent fuel source for various industrial processes. 2. Low Moisture Content: With minimal moisture content, petroleum coke offers efficient combustion and energy generation, maximizing heat output and reducing emissions. 3. Versatile Applications: From fueling industrial boilers and kilns to manufacturing electrodes and anodes, petroleum coke serves as a valuable raw material in numerous industries. 4. Cost-Effective: Compared to other carbon sources, petroleum coke often provides a cost-effective solution for fueling and carbonization needs, helping organizations optimize their operational expenses. 5. Consistent Quality: Produced through a controlled refining process, petroleum coke maintains consistent quality and performance, ensuring reliable results in diverse applications. Benefits: Energy Generation: As a fuel source, petroleum coke is prized for its high calorific value and efficient combustion, making it an ideal choice for power generation and heat-intensive industrial processes. Carbon Source: Petroleum coke serves as a primary raw material for the production of carbon electrodes, used in the steel and aluminum industries, as well as anodes for the production of aluminum. Chemical Feedstock: In addition to its use as a fuel and carbon source, petroleum coke finds applications as a chemical feedstock for the production of various carbon-based products, including graphite, carbon black, and specialty chemicals. Waste Utilization: By repurposing petroleum coke as a valuable resource, industries can reduce waste generation and contribute to more sustainable and efficient production practices. Target Audience: Refineries: Petroleum coke is a byproduct of the refining process, making refineries a primary source of this material for both internal use and external sale. Power Plants: Utilities and power generation companies utilize petroleum coke as a fuel source in boilers and furnaces to generate electricity and heat. Steel and Aluminum Industries: Manufacturers in the steel and aluminum sectors rely on petroleum coke as a key ingredient in the production of carbon electrodes and anodes for metal smelting processes. Chemical Manufacturers: Chemical companies utilize petroleum coke as a feedstock for the synthesis of various carbon-based chemicals and products. Unlock the Potential of Petroleum Coke for Your Industrial Needs!
Description: D6 Virgin Fuel Oil is a premium-grade fuel renowned for its exceptional purity and performance. Produced through a stringent refining process, D6 Virgin Fuel Oil meets the highest industry standards and is widely recognized for its reliability and versatility across various applications. Key Features: Virgin Quality: D6 Virgin Fuel Oil is derived from virgin crude oil feedstock, ensuring superior quality and consistency in every batch. Low Sulfur Content: With a low sulfur content, D6 Virgin Fuel Oil complies with environmental regulations, reducing emissions and minimizing environmental impact. High Energy Density: Boasting a high energy density, D6 Virgin Fuel Oil delivers optimal fuel efficiency and maximum power output, making it an ideal choice for demanding industrial and commercial operations. Excellent Stability: Engineered for long-term stability and performance, D6 Virgin Fuel Oil maintains its integrity even under extreme conditions, providing reliable fueling solutions for critical applications. Wide Range of Applications: From power generation and industrial heating to marine propulsion and aviation, D6 Virgin Fuel Oil offers versatile fueling options for diverse industries and applications. Benefits: Reliability: Backed by stringent quality control measures and rigorous testing, D6 Virgin Fuel Oil offers unmatched reliability and consistency, ensuring uninterrupted operation and minimal downtime. Environmental Compliance: With its low sulfur content and adherence to regulatory standards, D6 Virgin Fuel Oil helps organizations meet environmental compliance requirements and reduce their carbon footprint. Cost Efficiency: By maximizing fuel efficiency and minimizing waste, D6 Virgin Fuel Oil helps organizations optimize their operational costs and enhance overall profitability. Versatility: Suitable for a wide range of industrial and commercial applications, D6 Virgin Fuel Oil provides flexible fueling solutions tailored to the unique needs of each customer. Target Audience: Power Generation Industry: Ideal for power plants and utilities, D6 Virgin Fuel Oil offers reliable and cost-effective fueling options for electricity generation and grid stability. Industrial Sector: From manufacturing facilities to industrial boilers, D6 Virgin Fuel Oil provides efficient and sustainable fueling solutions for various industrial processes and heating applications. Marine and Aviation: Trusted by shipping companies, cruise liners, and airlines, D6 Virgin Fuel Oil powers marine vessels and aircraft with exceptional performance and reliability. Experience the Power of Pure Performance with D6 Virgin Fuel Oil!
Diesel Gasoil EN-590 10PPM is a premium-grade diesel fuel that meets the stringent European Union standards for quality and environmental performance. With a maximum sulfur content of 10 parts per million (PPM), this ultra-low sulfur diesel (ULSD) offers exceptional cleanliness and efficiency, making it an ideal choice for modern diesel engines. Key Features: Ultra-Low Sulfur Content: Contains only 10 parts per million of sulfur, ensuring reduced emissions and enhanced environmental sustainability. High Energy Density: Provides superior energy density, resulting in improved fuel efficiency and engine performance. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, ensuring optimal performance and reliability. Enhanced Lubricity: Formulated with additives to enhance lubricity, protecting critical engine components and prolonging engine life. Cold Weather Performance: Engineered to perform well even in cold weather conditions, with excellent cold flow properties for reliable starting and smooth operation in sub-zero temperatures. Benefits: Environmental Sustainability: By significantly reducing sulfur emissions, Diesel Gasoil EN-590 10PPM helps mitigate air pollution and minimize environmental impact, contributing to a cleaner and healthier environment. Improved Engine Performance: With its clean-burning properties and high energy density, this diesel fuel ensures optimal combustion, resulting in increased power output, reduced fuel consumption, and lower maintenance costs. Compliance with Regulations: Meets the strict quality standards set forth by the European Union for diesel fuel, ensuring compliance with regulatory requirements and avoiding costly penalties. Versatility: Suitable for a wide range of applications, including transportation, industrial, agricultural, and commercial use, providing versatility and reliability across various industries. Target Audience: Transportation Companies: Ideal for trucking companies, logistics providers, and fleet operators seeking to optimize fuel efficiency and minimize emissions in their diesel-powered vehicles. Industrial Users: Suitable for use in generators, machinery, and equipment in various industrial settings, offering reliable performance and compliance with environmental regulations. Commercial Businesses: Suitable for use in commercial vehicles, construction equipment, and agricultural machinery, providing dependable fueling solutions for daily operations. Make the Switch to Diesel Gasoil EN-590 10PPM and Experience Cleaner, More Efficient Diesel Power!
As Per Seller Procedure only Dip and pay CIF FOB
As Per Seller Procedure only. Dip and pay CIF FOB
As Per Seller Procedure only. Dip and pay CIF FOB
We are supplier and exporter of Diesel. We have various types of Diesel. Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
