Quality Product with High burning time of 6 Hours.
Product Information: Above-average ENplus quality! Our pellets are ENplus certified. In terms of abrasion, ash content, fine particles, and heating value, they exceed the minimum requirements of the quality standard. The standard values are intended to ensure high product quality, good heating performance, and a stove-friendly combustion. This way, you can heat energy-efficiently because your stove runs smoothly and you need fewer pellets. The ENplus values in detail: Lower heating value over 4.8 kWh/kg This is the most important value for you, as the higher the lower heating value, the greater the maximum usable amount of heat generated during combustion. The wood pellets we offer have a lower heating value of over 4.8 kWh/kg â?? the ENplus standard requires 4.6 kWh/kg. This value is important because only the lower heating value measures the actual energy content of your pellets! Many manufacturers and retailers indicate the upper heating value on the packaging, which is always higher than the lower heating value but does not provide any information about the actual energy content of the pellets during combustion. Abrasion under 0.6% The ENplus standard for abrasion is 2%, which corresponds to a mechanical strength of 98%. This means: The lower the abrasion, the more stable the pellets. Our offered pellets have an abrasion of 0.6% and a mechanical strength of 99.4%, which is significantly better than the standard. This means that less dust and fine particles are produced during combustion. Ash content less than 0.4% ENplus certified pellets may have an ash content of 0.7%. This refers to the amount of ash that remains after combustion. The ash content of the offered wood pellets is a maximum of 0.4%, making it particularly low and gentle on your stove. Almost dust-free with a fine particle content of 0.05% The bagged product is almost dust-free because it has only a fine particle content of 0.05%. This is well below the ENplus standard upper limit of 0.5%. Fine particles are defined as pellets smaller than 3.15 mm. If this proportion is too high, deposits can form in the stove, affecting heating quality. Optimal moisture content The pellets from Dorr Biomass Farm have a moisture content of 6.9 to 7.1%. This is optimal because a higher moisture content reduces the heating value of the pellets during combustion and produces more soot. The ENplus standard therefore allows a maximum of 10%. If the moisture content is too low, pellets burn too quickly and do not heat efficiently.
I'm end seller. $___/MT CIF AWSP minimum 50,000MT/month for a year. Ship to your Tank. Shipping straight from refineries to any safe world port. No any upfront/deposit. 2% PB to buyer for guarantee of delivery. ~PRODUCT:DIESEL FUEL EN590-10PPM ~ORIGIN:Kazakhstan ~CURRENCY:USD ~Price: USD$480 PER MT ~QUANTITY: At least 50,000 metric tons per month 12 consecutive months ~DESTINATION: SHIP TO TANK xxx PORT /ASWP ~MODE OF PAYMENT: SBLC/BG + MT103/TT(No any upfront/deposit) ~2% PB to buyer for guarantee of delivery
Indonesia possesses 161.4 billion tons of coal reserves (2022). Majority of reserves located in Kalimantan (58%), Sumatra (23%), and Sulawesi (12%). Primary coal types: thermal (70%) and metallurgical (30%). Indonesia's coal production reached 557 million tons (2022). Coal exports: 436 million tons (2022), valued at USD 38.3 billion. Main export destinations: China (34%), India (28%), and Japan (14%). Coal is Indonesia's leading export commodity.Coal sector supports 3.5 million direct and indirect jobs. Government revenue: Rp 64.9 trillion (2022).
EN590 DIESEL (ULSD) starting at $500/MT. Origin: NON-SANCTIONED We provide FOB TTT/TTV with full Proof of Product (POP) after Tank Storage/Vessel verification and CIF ASWP via SBLC/DLC Procedure. Available quantities at: Rotterdam, Houston, Fujairah, Jurong, Qingdao, and Ningbo-Zhoushan Please request our complete Soft Corporate Offer with updated pricing and procedures.
Our company is a large manufacturing company based in Uganda EAST AFRICA, we supply the best quality wood pellets ,wood briquettes,wood Pallets and other wood products.we do sell at very moderate prices and we offer quality products to our customers. Nplus A1 Pine Wood Pellets, 6 mm, 15 kg, 990 kg Reference enplus-a1 EAN13 4270003564168 ENplus A1 wood pellets. High-quality wood pellets (6 mm) are made from environmentally friendly pine wood without any additives. They have high performance characteristics, such as high calorific value, low ash content and humidity. Packaging: 66x 15kg bags, 990 kg Description Product data sheet Name ENplus A1 pine wood pellets, 6 mm, 15 kg, 990 kg Origin Ukraine, Wood.ua Quantity 66 bags Total weight 990 kg Diameter 6 mm Moisture 10% Ash content 0.7% Mechanical durability 98% Pellet density 600 - BD -750 kg/m3 Features of pine pellets
Hardwood Charcoal Top sale Best Quality Hot Sale Price activated charcoal 100% coconut shell charcoal Best Grade Hardwood Hard Wood Charcoal Oak Charcoal Oak Charcoal at cheap sales price Charcoal is a black, porous, and lightweight substance that is created by burning organic materials in a low-oxygen environment. It has various uses in different fields due to its unique properties. Here are some key points about charcoal: Wood Charcoal: This is the most common type of charcoal and is made by burning wood in the absence of oxygen. It's used for cooking, heating, and industrial purposes. Activated Charcoal: Also known as activated carbon, this type of charcoal is treated to have a large surface area and is used for adsorption, purification, and filtration in various applications, including medicine and water treatment. Charcoal Briquettes: These are compacted blocks made from a mixture of charcoal and binding agents. They are commonly used as fuel for grilling and barbecuing. Types of Charcoal: Cooking: Charcoal is commonly used as a fuel for grilling and barbecuing due to its high heat output and ability to impart a smoky flavor to food. Heating: Charcoal can be used as a heating fuel in some regions, particularly in areas where other energy sources are less accessible. Art and Drawing: Charcoal sticks are used by artists for sketching and drawing due to their soft texture and ability to create deep, dark lines. Water Filtration: Activated charcoal is used in water filters to remove impurities, odors, and contaminants. Air Purification: Activated charcoal is used in air purifiers and masks to adsorb pollutants and odors from the air. Medicine: Activated charcoal is sometimes used in emergency medical situations to treat poisoning or overdose by adsorbing toxins in the digestive system. Soil Improvement: Charcoal can be used as a soil amendment to improve soil structure and fertility. Uses:
Our pellets are mainly used as: - bedding in poultry, horse, pig, cattle and rodent farming. - great as a substrate for growing mushrooms Product Parameters: Granule diameter - 6/8mm Moisture - 8% Granule version: pellet / crushed Absorbency up to 400% of the original weight The smell of natural straw
Wood pellets are the most common type of pellet fuel and are generally made from compacted sawdust and related industrial wastes from the milling of lumber, manufacture of wood products and furniture, and construction. Pellets are categorized by their heating value, moisture and ash content, and dimensions. They can be used as fuels for power generation, heating.
Origin: Kazakhstan Quantity: Up to 100000MT per month Trial order is required by prepayment. Tech Specs: 1 Mass fraction of total moisture, % not more than 0.5 not more than 0.5 2 Ash content, %, not more not more than 0.60 not more than 0.60 3 Mass fraction of sulfur, % not more than 2.0 not more than 2.0 4 Mass fraction of coke with a particle size > 6 mm, % not less than 30.0 not less than 30.0 5 True density, g/cm 2.02-2.06 2.06-2.09 6 Mass fraction of silicon, iron, vanadium, %: Silicon: not more than 0.080 not more than 0.080 Iron: not more than 0.080 not more than 0.080 Vanadium: not more than 0.045 not more than 0.045 7 Bulk density, g/cm: not less than 0.86 not less than 0.86 8 Mass fraction of oiling agent, %: not more than 0.50 not more than 0.50