Fuel Energy Resources Suppliers and Manufacturers

EN 590 is the current standard for all automotive diesel fuel. It is a 10 PPM sulphur content Gas Oil.

Bulk Wood Pellets Manufacturers / Quality Wood Pellets EN plus A1/ en plus a1 6mm-8mm For Sale Biomass Wood Pellet

As a transportation fuel, diesel fuel offers a wide range of performance, efficiency, and safety features. Diesel fuel also has a greater energy density than other liquid fuels, so it provides more useful energy per unit of volume

Specification item value EN Plus A1 Product Name: EN Pine Wood Pellet Packing :Custom Quality :Top Quality Brand :Custom SIze: 15kg Delivery Time :7-10 Days

100% Namibian Hardwood Charcoal for export. The charcoal is made from hardwood obtained from the clearing of invasive bush on Namibian farms. The invasive bush is cleared as it prevents the proper replenishment of the groundwater reserves in an already arid country. The dense bush prevents the grasslands from being used as grazing for livestock and wildlife. The Blackthorn (Acacia Mellifera) makes up 80% of the packed product. The balance is made- up of Candle Thorn (Acacia Hebeclada) and Mopane (Colophospermum mopane). threatening the indigenous fauna and flora. The particle size ranges from 30mm to 90mm. Charcoal is normally packed in 20kg white WWP. It can also be packed in bags supplied by the client. This would include Kraft paper bags and polyprop bags.

Sekelbos Barkless Firewood Logs 28cm Well-seasoned firewood logs. We harvest dead trees and dead branches from the hardwood Sekelbos tree in the North-West Province of South Africa. This area is commonly referred to as the Bosveld. The tree is classified as an invasive species. The bark naturally comes off due to the harsh sun and arid conditions after two to three years.

Biochar SA Hardwood 1mm>15mm Hardwood charcoal Biochar made from South African Sekelbos. Sekelbos is an invasive species threatening the indigenous fauna and flora. The particle size ranges from 1mm to 15mm. Biochar is normally packed in 20kg white WWP. It can also be packed in branded bags supplied by the client.

Origin: Kazakhstan Quantity: Up to 100000MT per month Trial order is required by prepayment. Tech Specs: 1 Mass fraction of total moisture, % not more than 0.5 not more than 0.5 2 Ash content, %, not more not more than 0.60 not more than 0.60 3 Mass fraction of sulfur, % not more than 2.0 not more than 2.0 4 Mass fraction of coke with a particle size > 6 mm, % not less than 30.0 not less than 30.0 5 True density, g/cm 2.02-2.06 2.06-2.09 6 Mass fraction of silicon, iron, vanadium, %: Silicon: not more than 0.080 not more than 0.080 Iron: not more than 0.080 not more than 0.080 Vanadium: not more than 0.045 not more than 0.045 7 Bulk density, g/cm: not less than 0.86 not less than 0.86 8 Mass fraction of oiling agent, %: not more than 0.50 not more than 0.50

Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60C Maximum 460 micrometers Copper Strip Corrosion (3h @ 50C) Class 1 Oxidation Stability @ 110C Minimum 20 hours FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 microns

Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm/s (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60�°C Maximum 460 micro Copper Strip Corrosion (3h @ 50�°C) Class 1 Oxidation Stability @ 110�°C Minimum 20 hour FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 mi

Property Unit Specification Cetane Number Minimum 51 Density at 15C kgm 820 845 Viscosity at 40C mms 20 45 Flash Point C Minimum 55 Cold Filter Plugging Point CFPP C Varies by climate zone Sulfur Content mgkg Maximum 10 Polycyclic Aromatic Hydrocarbons PAH by mass Maximum 8 Lubricity HFRR m Maximum 460 Distillation Recovery at 250C by volume Minimum 85 Distillation Recovery at 350C by volume Maximum 95 Ash Content by mass Maximum 001 Water Content mgkg Maximum 200

EN590 10 PPM Diesel is in high demand. We are direct mandate. We can supply in large quantity. Procedure for EN590 10 PPM is set by refinery. Please only inquire if you require serious, professional service and guarantee that you will receive EN590 10PPM fuel. NOTE: Refinery procedure is set for 100% success rate of buyer receiving the fuel. We offer CIF and FOB procedure. As market changes everyday, pricing of fuel may be subject to change. We can guarantee you the most competitive pricing for fuel, only if you follow direct refinery procedure. Please note in an international community where different language communication style and cultures can block business transactions. Let's work together to negotiate a successful transaction for you, the buyer.