Kiln dried Oak firewood logs are a traditional firewood with a slow and steady burn. Suitable for wood burners, firepits, stoves, chimineas and other appliances. This hardwood log is seen as the romantic fuel of the firewood world. The oak logs are cut, split and kiln-dried before being hand stacked neatly into a full crate for maximum value per purchase. A full crate is enough to keep your log shed stocked throughout the colder months, while also being small and convenient enough to be delivered down country lanes. Traditionally used as a yule log in Pagan tradition throughout the colder and darker months, oak is a popular choice for its incredibly long burn duration. Oak logs have a tight grain and have a high density. This means that they have a high calorific value that generates more heat while burning more slowly ideal for overnight use. Please note that the high density makes oak harder to light. We recommend that you use Ecoblaze natural firelighters when burning oak for effortless fire lighting. Spend less time tending to the fire and get on with your day while the low flame flickers in the background. Important features: Longest burn duration Hardwood logs are split, cut to 25cm lengths Kiln dried to moisture content below 20%. All full crates of firewood are Ready to Burn accredited and labelled. This means they meet Woodsure's quality checks and have moisture content levels of 20% or less. Our crates are wrapped in a thin plastic sheet to maintain their dryness during the shipping process. To keep your firewood dry, place these in a sheltered storage space with plenty of air circulation.
Kiln dried birch firewood logs are a user-friendly wood fuel for your wood burner, stove, firepit, chiminea, wood fired pizza oven or wood fired hot tub. Choose our best value birch logs for the most convenient fire lighting experience. full crate is enough to keep your log shed stocked throughout the colder months, while being a convenient size for delivery to most EU addresses. There's no need to panic about your firewood supply getting low! Birch is a light coloured hardwood and a traditional choice in Scandinavian countries. Its thin paper-like bark is great as a firelighter and Birch logs produce a fierce flame when burned. Because of how quickly they reach the desired heat levels, you can achieve and experience luxurious warmth within a short amount of time. Important features: Best value and easy to light Split and cut to 25cm lengths Kiln dried to moisture levels under 20% All full crates of firewood are â??Ready to Burnâ?? accredited and labelled. This means they meet Woodsureâ??s quality checks and have moisture content levels of 20% or less. Our crates are wrapped in a thin plastic sheet to maintain their dryness during the shipping process. To keep your firewood dry, place these in a sheltered storage space with plenty of air circulation.
Product Specification Fixed Carbon : 83-85% min. Moisture : 10-13% max. Ash : <3% Volatile Matter : <10% Heat : 7500 kcal min. Shape : Cube / Finger Cube Size : 22mm� (or by request) Finger Size : 20mm x 35mm� (or by request) Burning Time : 1 â?? 2 Hours Smoking : No Sparking : No Chemical : No Additional Information Application : Shisha / Hookah Raw Material : Mix 50% Hardwood Lump Charcoal + 50% Coconut Shell Charcoal Min. Order Qty : 1 x 20ft Container (18 Tons) Packaging : 1kg Inner Plastic and Box within 10kg Master Box Design : Brand print based on customers request Shipment : Full shipment within 28 Days
Product Specification Fixed Carbon : & 80% Moisture : & 4% Ash : & 2% Volatile Matter : & 15% Heat : 7000 kcal min. Fraction Size : 40 -200mm Burning Time : & 3hrs Smoking : No Sparking : No Additional Information Application : Restaurant, BBQ & Shisha Raw Material : 100% Halaban Wood â?? hardwood lump charcoal Min. Order Qty : 1 x 40 FT HQ Container (20 Tons) Packaging : 20kg PP Bags (or by request) Shipment : Full shipment within 28 Days
Velvet tamarind very special kind of tamarind from Indonesia
Parameter Unit Appearance: Clear and bright, free from visible sediment and water. Colour: 2.5 max Odour: Merchantable Density @ 15C g/ml: 0 820 min 0 835 max Cold filter plugging point Winter C (*): -15 max Summer C (*): -5 max Cloud point Winter C (*): -5 max Summer C (*): +3 max Flash point (PMCC) C: 56 min Cetane number: 51 min Cetane index: 46 min Viscosity cst @ 40C: 2.0 min 4.5 max Sulphur % Wt: 0 001 max Copper corrosion 3 hr @ 50C: class I Micro carbon residue: Residue wt on 10% bottoms: 0 30 Ash % Wt: 0 01 max Particulate matter mg/kg: 24 max Water mg/kg: 200 max Distillation C % Vol Rec @ 250 C: 65 0 max % Vol Rec @ 345 C: 85·0 min 95% Vol recovered C: 360 0 Oxidation stability mg/100ml: 2·5 max Polycyclic aromatic hydrocarbons (%): 11 max Lubricity, Corrected water scar: 460 Diameter @ C
We supply top-grade EN590 Diesel fuel and high-quality Diesel D6, both meeting rigorous international standards. EN590 is ideal for all diesel engines, while Diesel D6 serves various industrial applications. We offer competitive pricing and CIF delivery terms. Significant discounts are available for bulk purchases, making our products a reliable and cost-effective choice for both retail and wholesale buyers.
Type: Natural Hardwood and Softwood Charcoal We export hardwood and softwood charcoal of high calorific value and low ash content. Charcoal is a renewable and eco-friendly source of energy. It is used for cooking, heating, industrial and agricultural purposes. Our natural hardwood charcoal offers excellent heat retention and burning properties, ideal for grilling and cooking applications. Origin: Nigeria Type: Natural Hardwood Charcoal Fixed Carbon Content: 80% Volatile Matter: 15.5% Ash Content: 3% max Moisture Content: 5% max Heating Level: Kcal/Kg> 7600 Burning Time: 980sec/cm3
Our premium Hardwood Charcoal is made from Ayin or Birch Hardwood. Premium BBQ Hard Wood Charcoal Raw material : Ayin/Birch Hardwood, Acacia Hardwood, High Grade Mix Heavy Hardwood Usage : For BBQ, Grill or Restaurant. No Chemical added Dimension: lump shape 4 cm up to 15 cm Non Spark - Less Spark - Less Smoke - Odorless Loading in 40ft = approx 18 tons to 22 tons Delivery 3 weeks Price: Incoterms as agreed. USD $300 - $750 depending on Hardwood type Packing 25kg Woven Bags Production Capacity 500 ton/month Payment: Payment terms will be discussed with buyer (by Bank Transfer or L/C) - P/S: Mention in B/L is WOOD CHARCOAL - not Wooden Products!
100% Pine Wood Pellets, Acacia Wood pellets, Wood Shavings, Wood chips, Wood sawdust, Wood powder, Wood briquettes.
Birch wood and Acacia hardwood charcoal. Non-spark, non-smoking, no odor and long lasting burn for Restaurant BBQ
D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400. Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
For metallurgical coke, we can supply based on the following range of specifications: Fixed carbon: 80%~86% Sulphur: 0.7%~1.0% Ash:13.5%~18% Volatile matter: 1.5% max. Moisture: 8%~15% Size is customized
We supply foundry coke products with the range of specifications as follows: Fixed carbon: 85%~90% Sulphur: 0.5%^0.8% Volatile matter: 1.5% max. Size is customized ASH >8%/15%
FIXED CARBON 98.5%MIN Sulphur 0.1%MAX Ash 0.7%Max Volatile matter 0.8%MAX moisture 0.5%max Size 1.5 mm
Fixed carbon 99% min. Sulphur 0.03%max. Ash 0.5% max. Volatile matter 0.5% max. Moisture Size (mm) HQ-GES-01 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1
Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate. Item HQ-SGPC-01 Fixed carbon Sulphur 98.5% min. 0.1% max. Ash 0.7% max. Volatile matter Moisture Size(mm) HQ-SGPC-02 98.5% min. 0.2% max. 0.7% max. HQ-SGPC-03 98.5% min. 0.3% max. 0.7% max. HQ-SGPC-04 98% min. 0.5% max. 1% max. HQ-SGPC-05 98% min. 0.8% max. 1% max. 0.8% max. 0.5% max. 0.8% max. 0.5% max. Graphite Electrode Scrap(GES) Item Fixed carbon Sulphur Ash HQ-CPC-01 98.5% min. 0.5% max. 0.7% max. HQ-CPC-02 98.5% min. 0.8% max. 0.7% max. HQ-C PC -03 98.5% min. 1% max. 0.5% max. HQ-CPC-04 98.5% min. 2% max. 0.5% max. HQ-CPC-05 98.5% min. 3% max. 0.5% max. Size(mm) 1-3/1-5 1-5/30-60 1-3/5-20 1-5 0-2 Item Fixed carbon Sulphur Ash Volatile matter Moisture Size (mm) HQ-GES-01 99% min. 0.03%max. 0.5% max. 0.5% max. 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1 * Other sizes and specifications are available,please enquire - HENGQIAOCARBON 1% max. 1% max. 0.5% max. 0.5% max. 0.8% max. 0.5% max. 1-5 3-8 1-5 1-5 1-5 Green petroleum coke 144 shaft kiln for petcoke calcined 1% max. 0.5% max. Crush Sieving Packing Volatile matter Moisture 0.8% max. 0.5% max. 0.8% max. 0.5% max. 1% max. 0.5% max. 1% max. 0.5% max.
High-quality green petroleum coke is taken into Acheson furnace for graphitization process with temperature around 2500-3600 �°C.The product has higher degree of graphitization with nitrogen content is lower than 300ppm.This product, with lower sulpur and ash content, is ideal recarburizer for steelmaking and foundry industries. Fixed carbon 99% min. Sulphur 0.03% max. Ash 0.5% max. 0.7% max. 1% max. 1% max. Volatile matter 0.5% max. 0.8% max. 1% max. 1% max. Moisture 0.5% max. 0.5% max. 0.5% max. 0.5% max. Size(mm) 1-3/1-5 1-5/5-10 0.2-1 0-0.5 2 HQ-GPC-02 98.5% min. 0.05% max. HQ-GPC-03 98% min. 0.07% max. HQ-GPC-04 98% min. 0.1% max. ä¸? è??楺碳表 HENGGIAO CARBON Semi-graphite Petroleum Coke(SGPC) Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate.
Calcined petroleum coke is solid petroleum coke product with black and dark gray color,shine with metallic luster,porosity and composed with micro-graphite crystals.It is the carbon material in the form of granular,columnar and acicular. Type Fixed carbon(Min) Ash(Max) Volatile Matter(Max) Moisture(Max) Sulfur content(Max) Nitrogen content(Max) Calcined petroleum coke 98.5% 0.50% 0.50% 0.50% 0.5% 300ppmSize:1-5mm,1-3mm,or as customer request. Application: 1,Calcined Petroleum Coke can be widely used for producing Anode Paste and Prebaked Carbon Anode for electrolytic Aluminium,application as additive in graphite electrode and carbon raiser production,also used as fuel for silicon. 2,Used as basic raw material for carbon additive and foaming agent. 3,Used in chemical industry as the basic source of sodium hydride and high
