Model: mkq 188b Advanced technique Contactless switch on the control panel Simple operation on the control panel without any special training Easy assemble and disassemble, saving time and labor Non-stick and easy to wash Three criterias to make rice mat:futo maki, chu maki, hoso maki Double heat-retaining heater & hopper Packing: plywood case Weight:68kg Size:690*500*710mm
Introduction This machine is suitable for the extraction of vegetable oils from such oil-bearing materials as rape seed, peanuts, sesame seed, etc.(the pressing worms can be replaced as required by the user for the purpose of the extraction of oils from some other oil-bearing materials, such as rice bran oil and the like.) Features 1. All such main parts of this machine as worm shaft, pressing worms, cage and so forth are made of high-grade alloy steel through hardening treatment. As a result, in spite of the conditions of high temperature and abrasion under which they work day and night, hey keep durable for a considerable period. 2. The combine of steaming and roasting is also one of the features of this machine. It can be regulated in accordance with the varied requirements of various oil-bearing materials for the temperatures before pressing so as to get high quality oils. 3.The whole process from feeding steaming, roasting up to the discharge of oil and cake goes on automatically and continuously, so it is easy to operate the machine, which results in the caving of labor. 4. Steam pressure 5-6kg/cm2, pressing worm speed: 8rpm;seed steaming and roasting time: 90min;max. Temperature for seed steaming and roasting:125-128¡ãc. Technical data Model: sl-204 Capacity: 2-5t/h Oil residue in cake: less than 7% Main power: 18.5kw Package size:3040*1600*1880mm(oil press) and 1880*1480*2120mm(cooker) Weight:2t Package size:3040*1600*1880mm(oil press) and 1880*1480*2120mm(cooker) Weight:2t
" classifier " are used for a wide range of applications such as removing large impurities like stick, buck and leaves and are also used for removing fine dirt and sand from products in seed cleaning plants and seed processing plants. They incorporate two vibrating screens where the top screen performs the function of removing oversize material and the bottom screen removes fine dirt and sand. There are vibratory motors that are mounted in the center for vibration of the deck containing the screens. There are four hollow rubber springs on which the vibrating deck is mounted. This ensures that the vibration of the machine frame are reduced to a minimum. A swing down type door is also provided to ease change or cleaning of screens. Features Easily accessible screens for cleaning and changing. Easily adjustable deck inclination, stroke and angle of throw. Smooth performance because of vibratory motors. Hollow rubber springs for minimum main frame vibratio Size :2x1 m 1ton
Application: the machine is applied for processing cocoa bean. Constituent part: The machine is made up of up and down frame, deceleration device, transmission device, electricity device, stone runner device, heating device, discharge device and machine casing. Different models has differen dimension
Introduction This machine is suitable for the extraction of vegetable oils from such oil-bearing materials as rape seed, peanuts, sesame seed, etc.(the pressing worms can be replaced as required by the user for the purpose of the extraction of oils from some other oil-bearing materials, such as rice bran oil and the like.) Features 1. All such main parts of this machine as worm shaft, pressing worms, cage and so forth are made of high-grade alloy steel through hardening treatment. As a result, in spite of the conditions of high temperature and abrasion under which they work day and night, hey keep durable for a considerable period. 2. The combine of steaming and roasting is also one of the features of this machine. It can be regulated in accordance with the varied requirements of various oil-bearing materials for the temperatures before pressing so as to get high quality oils. 3.The whole process from feeding steaming, roasting up to the discharge of oil and cake goes on automatically and continuously, so it is easy to operate the machine, which results in the caving of labor. 4. Steam pressure 5-6kg/cm2, pressing worm speed: 8rpm;seed steaming and roasting time: 90min;max. Temperature for seed steaming and roasting:125-128¡ãc. Technical data Model: sl-204 Capacity: 2-5t/h Oil residue in cake: less than 7% Main power: 18.5kw Package size:3040*1600*1880mm(oil press) and 1880*1480*2120mm(cooker) Weight:2t Package size:3040*1600*1880mm(oil press) and 1880*1480*2120mm(cooker) Weight:2t
Alkali liquor tank Outer size: 500*1130, Total volume: 120l, Effective volume: 100l, Carton
Name: Squid slice machine YY - 100 Power: 800 w Voltage: 220/380, 50/60 Hz, 3 ph Production: 1000-2000 / hour Weight: 150 kg Size: 950 * 1100 * 1000 mm
Introduction Double roll crusher is designed for oil processing enterprises to handle large particles (soybean, peanut) oil crops in the first stage. Crushing effect direct impact on the quality and yield of the rolling billet, crusher is the key equipment of grease pre-treatment section. The machine can meet the crushing needs of daily processing capacity during 20t-1500t. Full set of large single motor drive crusher are designed on the basis of assimilation and introduction of imported technology, but the technical indicators exceed the level of similar products. The machines have been used for large oil processing enterprises in many countries. Specification Product brand: liaohai mingzhu (famous trademark of liaoning province) Squeezing material: soybean, peanut Daily processing capacity:20-1500t/d Warranty period: 2 years, take charge of maintenance Crushing strength 1/4-1/8 adjustable Features 1.Single motor drive, highly energy efficient 2.Synchronized use of digital reducer for roller gap adjustment 3.Roll feeder, evenly distributed feeding 4.Synchronized two-stage magnetic separator and automatic feed gate 5.Stable and reliable high-tensile frame 6.High-alloy crushing roller 7.Automatic drive belt tension mechanism 8.Imported bearing and independent bearing block Wooden case
Dimension:1980x1530x1220mm Capacity:600l Pot inner diameter:1300mm Agitator speed:0-29r/min Power:4+0.75kw/380v Wood case
The home dumpling making machinecan make dumplings, samosa, spring roll, fried dumplings, yunton, wonton by changing the forming mould. 650¡á450¡á800mm, 110kg
1.About product:dog feed pellet processing machine. Dog food making machinery sph-70 uses corn, meat powder, fishmeal and beans etc. As raw materials to produce dog food with all kinds of shapes, unique and wonderful taste, rich nutrition and exquisite structure. The core machine of this processing line is twin screw extruder. We have enough and advanced extruding technology. With steam heating pre-conditioning system and auto water adding system, we can achieve rather high output and better extruding and puffed products. With dust collecting system, which may guarantee better health and taste quality. Also pre-cleaner can be added. 2.Unique features of dog feed processing machine: Consists of feeding system, extruding system and cutting system Adopting frequency speed-controlling with high automation and stable per-formation. Automatic lubricating and forced cooling guarantee the extruder running safely. Choose the relative single or double screw feeding system according to different material Wooden case
LINE JUFKA Phyllo Pastry LINE MACHINE Buren Lavash Machine Dough lines are produced in two varieties. The first of these is called Half phyllo doughoutput Line, thinning, and cutting units, consisting of widening line. This line is produced in raw dough. Desired tactical cook this dough, rotating oven can be cooked in s. rotating cooker manufacture are also available. Secondly, what we call Full Pastry Line, in addition to half or even cooking oven and watering & drying line connecting the tape units in the addition of the occurrence. Olam Yufka produced the desired fineness ( the line is separate from the diamond to phyllo ) and may be desired dimensions. Machine Dimensions: Half-Line: ~ 8 m length X 1.5 m wide x 1.7 m height Full line: ~ 18 m length X 1.5 m wide x 1.7 m height machine Electricity Consumption: Half-Line: 5, 5 KWA Full Line Gas Oven: 7,5 KWA Full Line Electric Oven: 20 KWA Machine Production Capacity: Pastry Line: 25 pieces / minute maximum. Approximately 15 pieces / minute. Customs and traditions with the thickness of a piece of filo, is related to the cooking rate. Oven Features: Oven LPG, natural gas (LNG) or electricity can be made available. Warranty: 's negligence, the mains power voltage problems and natural disasters, except for a period of 1 year warranty. Resulting from the manufacture or losing the functionality of the factory, the parts are insufficient immediately repaired under warranty / exchange is. Service & Spare Parts: 12-48 in Turkey, Turkey is outside intervention in 24-96 hours. Covered by warranty at no additional charge for machines. Out of warranty for the remaining machines, spare parts are sent if the customer is likely to repair, shall be certified, qualified foreman with a repair is required, staff are sent, repairs completed and will be charged. Service response times, spare parts in manufacturing process, the distance varies according to distance and plant density. Certificates: Dough machines are manufactured to CE standards. 2009/142 EEC 90/396 Gas Appliances Gas furnaces norms. UN-MAK has ISO 9001:2000 quality standards . Materials: Production, food of all components in contact with stainless steel, polyethylene, and teflondur plexyglass. Tapes are suitable for food use. Other parts used in a little iron. Finished: Burek and baklava, round or square / rectangular dough produced. In addition, it is possible to add a line in the production of non-pastry. Lavash types. Required Personnel: during the operation of the machine can hold only 2 staff under the control of all production. A member of staff dealing with the machine, dough and flour supplement, made from the exit of personnel, in keeping the product and take care of. Education: Mechanical, tesesine, our company was established by qualified persons, trained and the operators are executed and delivered to the user. a plant needs: a simple pastry manufacturing property, roughly, dough mixers, dough machine, packing machine, flour store, package store, cleaning equipment, such as may be necessary for the small compressor. Prices: Current prices can find out by calling our company Payment Terms: Our company is your most Be sure that you will provide convenient payment plan. Lead Time: Half-Line for 10 - 15 business days Full Line for 15 - 30 business days , this time, however, may extend or shorten under the circumstances. That is to say, the production of any other order in question is a priority, If a machine is already available in stock or stock or natamam, time varies. This time, under the circumstances, the proposal is presented to the customer in the process. Forty-Foot Container
Sandwish & grill *cool-touch handle with auto-lock clip *power and ready light indicators *automatic temperature control *non-stick coating plates for easy cleaning *cord-wrap and upright for storage *stainless steel top housing *antislip rubber foot *ac110~230v/50~60hz, 600~700w material: pf, pbt, pc, pvc, pp, al, iron, steel, cu, foam Product size:225*235*80 mm Plate size:120*223 mm G.B: 263*112*250 mm Master carton: 690*275*525 mm£¨10pcs/ctn£©
Sandwish maker *cool-touch handle with auto-lock clip *power and ready light indicators *automatic temperature control *non-stick coating plates for easy cleaning *cord-wrap and upright for storage *stainless steel top housing (sw-168s) *antislip rubber foot *ac 110~230v/50~60hz, 600~700w Material: pf, pbt, pc, pvc, pp, al, iron, steel, cu, foam Product size: 225*235*80 mm Plate size: 120*223 mm Gift box size: 263*112*250 mm Master carton: 678*275*525£¨10pcs/ctn
Canned, pickled food processing equipment Application It suitable for soft package (hill wild, boiled vegetable, etc) sterilizing, cooling and air-drying. Capacity 300kg/h-1000kg/h Product characteristics * the equipment is made of 304 stainless steel except motor, bearing, etc. It is in compliance in export food sanitation standard. * it applies to processing of various bagged and canned products. * adjustable speed, stepless speed control and frequency control is any optional. * can automatically control blanching temperature within the range from 80 centigrade to 95 centigrade. * the tank of sterilization machine is made of perlite cotton board for keep temperature in order to allow the person to operate.
Tropical fruit processing line|tomato paste production line|carbonated beverage production line Strawberry paste production line Major equipment Scraper elevator, float washing machine, fruit picker, brush fruit washing machine, oil mill, special-purpose citrus juicer, preheating enzyme-killing machine, pulping refiner, bushing sterilization machine, sterile filling machine (single equipment in 2 can be connected in corresponding device of single equipment, excluding no single device in the single equipment.) Description A. This processing plant is also suitable for pear, and some equipments fits for strawberry and tomato. B. Fruit paste/ jam is deemed to very good food additives when processing fruit juice. Especially in middle east and north america, fruit paste/ jam often used to instead of bee or other sweetmeat. Also, fruit paste/jam is widely use in candy, confect and beverage. C. The capacity of apple process plant we can provide is from 60 ton to 2000 ton apple fruit per day.
Tropical fruit processing line|tomato paste production line|carbonated beverage production line Tea drink integrated processing line Main equipments Blending tank, high-speed sugar melting tank, filter, viscolizer, plate type sterilization machine, filling machine, pour bottle sterilization machine, coding machine Description A. Fruit juice beverage production line is mainly used to make fc juice, i.E. Mixing inspissated fruit juice to make various fruit and vegetable juice drinks. The flowchart above is applicable to making of various juices. B. The production line can be used to make a variety of fruit and vegetable juice drinks, while the specific concentration of drinks can be set as customer required. C. The final design of packing could be tin case, glass bottle, or pet bottle based on customer requirements.
Toplea machinery imp&exp co., ltd is a manufacturer specializing in slaughtering machinery. We have gathered more than 30 years experience in the poultry processing field. We supply high quality poultry slaughter, poultry processing equipments, food machinery, poultry farming equipments, slaughterhouse assistant projects, high quality whole processing abattoir, butcher equipment, such as rendering plant machines, slaughter house offal treatment system and cold room. Our product are both popular in and out of china. And they are of high quality and competitive prices. We also provide excellent after-sale service. Wishing we could be long term partners and jointly create a better future.
According to the actual situation in the domestic middle and large-sized canning factories and beverage plants, our company has designed and manufactured a new generation filling and can sealing combination machine by referring to the most advanced same filling and can sealing products from abroad. The pneumatically controlled cover feeding without can body contact and the equal liquid level filling technology are adopted. The production adopts frequency conversion speed adjustment. More than 95% of the appearance materials are made of stainless steel to guarantee the requirements of beautiful appearance and sanitation of the whole machine. The steam jetting device can be allocated according to customer requirements to increase the vacuum degree in the can. Technical specifications: Number of can sealing heads: 4 Number of filling heads: 18 Production capacity: 80~250 cans/min Applicable can height: 70~133mm Applicable can diameter: 52.5~99mm Motor power: 5.5kw Outline dimensions: 308017202000mm Weight: 4000kg. Technical specifications: Number of can sealing heads: 4 Number of filling heads: 18 Production capacity: 80~250 cans/min Applicable can height: 70~133mm Applicable can diameter: 52.5~99mm Motor power: 5.5kw Outline dimensions: 308017202000mm Weight: 4000kg.
Voltage: 220v50hz/220v60hz/110v60hz Installed power: 2.4kw Flavor : 2+1mixed Output capacity: 35-40liters/hour Mix hopper: 8.5l*2 Freezing cylinder: 1.9l*2 Main compressor: tecumseh(from france)/aspera(from italy) Refrigerant: r22 or r404a Expansion valve: danfoss from denmark Solenoid valve from japan Certificates: CB & CE Dimensions: 750*546*1478mm Packing size: 820*650*1580mm N.W/g.W.: 180kg/225kg
