Reducing flanges, otherwise called reducer flanges, have an opposite function than expander flanges seen above, i.e. they are used to decrease the bore of a pipeline. The bore of the run pipe can be safely reduced by only 1 or 2 sizes (otherwise a solution based on the combination of a butt weld reducer and a standard flange has to be used). Reducing flanges are available in most sizes and material grades, and are not generally available from stock. Reducing flanges follow the same considerations in terms of specifications, sizes and material grades as expander flanges.
A ring joint face design has a grooved slot in which a metal ring gasket is inserted to creating a seal with mating flange. The metal ring is available in oval or octagonal shape. Most common material for ring joint gasket is 316 stainless steel which makes it ideal for corrosive applications A ring joint face design has a grooved slot in which a metal ring gasket is inserted to creating a seal with mating flange. The metal ring is available in oval or octagonal shape. Most common material for ring joint gasket is 316 stainless steel which makes it ideal for corrosive applications
Flat flanges have a gasket surface in the same plane as the bolting circle face. It is also known as flat face flange. Applications using flat face flanges are frequently those in which the mating flange or flanged fitting is made from a casting. Flat face flanges are used when the counter-flanges are flat face. This condition occurs mainly on connection to Cast Iron equipment, valves, and specialties. ASME B31.1 says that when connecting flat face cast iron flanges to carbon steel flanges, the raised face on the carbon steel flange must be removed, and that a full face gasket is required.
Orifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Pairs of pressure Tappings, mostly on 2 sides, directly opposite each other, are machined into the orifice flange. Orifice Flange Unions are designed &; manufactured to AGA, ASME, and ISA recommendations. We are manufacturing wide array of the following types- Raised Face weld neck orifice flanges Slip on threaded ring joint corner tap weld neck orifice flanges Raised Face slip-on orifice flange Ring-Type joint weld neck orifice flanges Corner tap orifice flanges
Screwed flange are often used for small diameter, high pressure requirements. Screwed flanges with a hub have published specifications that range from 1/2 thru 24. Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250 and Facing: RF / RTJ. Screwed flanges are threaded in the bore which match an external thread on the pipe. Screwed flanges are used with pipes that have external threads. The benefit of these flanges is that it can be attached without welding.
Standard Forged Flanges (Weld-neck, Slip-on, Socket-weld, Lap-joint, Blind and Screwed Types) are manufactured by us to specifications of ASME B16.5, ASME B16.47, ASME B16.48, BS EN 1092, BS 4504, API-605, API-590, MSSSP44, DIN 2632 to 2638, DIN 2576, 2642, 2527, 2566. Flanges cover a full range of pressure ratings of these specifications (150 â?? 2500 psi for ASME & PN6-PN400 for DIN / EN flanges). Non-standard flanges are made upto a diameter of 4500 mm and the weight not exceeding 5,000 kgs.
A flange connector is a device that allows the connection of many types of hoses and fittings onto a flanged pipeline. Typically manufactured from stainless or high-carbon steel, a flange connector is connected to a flanged pipe with bolts, and a gasket is sandwiched between the pipe flange and the connector. Common in manufacturing facilities, a flange connector is often used to allow a smaller and more manageable hose to be split off from a large feeder pipeline. A flange-type connector can also be used to block off a pipeline. Flange connector provides safe and easy connections between process lines and instruments. It provides Hy-Lok tube connection ends by a lap joint pipe flange to ANSI B 16.5 or BS 1560. Both "smooth" and "serrated" surface finishes are available. For identification of serrated surface finish, groove is provided.
We provide a full line of quality forged steel DIN specification pressure flanges. Whenever you need specialized custom flanges i.e. high alloy, low temperature, high strength, high pressure, specialized dimensions, adapters and reducers etc. No matter what size the job, large or small, we always give it our undivided attention! A DIN flange meets European standards that differ from ANSI / ASME standards. We produces DIN flanges to the appropriate standards for stock and custom flanges.
All kinds of flanges are available with extremely high-quality raw materials that can be offered in varied sizes, shapes, and surface finishes, and all our products are shipped with assured quality and authenticity checks. Types of flanges available: Blind pipe flanges, Pipe flanges, Slip-on flanges, Welding neck flanges, Long weld neck flanges, Threaded flanges, Socket weld flanges, Puddle flanges, Split flanges, Lap-joint flanges, Ansi flanges, Reducing flanges, Forged flanges and more as per demand
Flanges.
Flanges.
Flanges.
Flanges.
Flanges.
Flanges.
Flanges.
Flanges.
Flanges.
Flanges.
